EN ISO 13503-2:2006

Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations (ISO 13503-2:2006)

ISO 13503-2:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel-packing operations.
"Proppants" mentioned henceforth in ISO 13503-2:2006 refer to sand, ceramic media, resin-coated proppants, gravel-packing media and other materials used for hydraulic fracturing and gravel-packing operations.
The objective of ISO 13503-2:2006 is to provide a consistent methodology for testing performed on hydraulic fracturing and/or gravel-packing proppants.

Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und -materialien - Teil 2: Messung der Eigenschaften von Stützmaterialien zum Einsatz bei hydraulischen Fraktionierungs- und in Kiespackungsvorgängen (ISO 13503-2:2006)

Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 2: Mesurage des propriétés des matériaux de soutènement utilisés dans les opérations de fracturation hydraulique et de remplissage de gravier (ISO 13503-2:2006)

L'ISO 13503-2:2006 fournit des modes opératoires d'essais normalisés pour l'évaluation des agents de soutènement utilisés dans les opérations de fracturation hydraulique et de remplissage de gravier.
Son objectif est de fournir une méthodologie cohérente d'essai des agents de soutènement utilisés pour les opérations de fracturation hydraulique et de remplissage de gravier.

Industrija za predelavo nafte in zemeljskega plina - Tekočine in materiali za zaključna dela - 2. del: Merjenje lastnosti podpornih materialov, ki se uporabljajo v postopkih frakcioniranja in pri filtrskih zasipih s prodom (ISO 13503-2:2006)

General Information

• Status: Published
• Publication Date: 31-Oct-2006
• Withdrawal Date: 30-May-2007
• ICS: 75.100 - Lubricants, industrial oils and related products
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 10-Jan-2008
• Completion Date: 10-Jan-2008
• Ref Project: SIST EN ISO 13503-2:2007 - Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations (ISO 13503-2:2006)

Relations

• Amended By: EN ISO 13503-2:2006/A1:2009 - Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppand specification (ISO 13503-2:2006/Amd 1:2009)
• Effective Date: 22-Dec-2008
• Revised: FprEN ISO 13503-2 - Oil and gas industries including lower carbon energy - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations (ISO/FDIS 13503-2:2024)
• Effective Date: 07-Feb-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2007
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD7HNRþLQHLQPDWHULDOL]D
]DNOMXþQDGHODGHO0HUMHQMHODVWQRVWLSRGSRUQLKPDWHULDORYNLVHXSRUDEOMDMRY
SRVWRSNLKIUDNFLRQLUDQMDLQSULILOWUVNLK]DVLSLKVSURGRP,62
Petroleum and natural gas industries - Completion fluids and materials - Part 2:
Measurement of properties of proppants used in hydraulic fracturing and gravel-packing
operations (ISO 13503-2:2006)
Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und -materialien - Teil 2:
Messung der Eigenschaften von Stützmaterialien zum Einsatz bei hydraulischen
Fraktionierungs- und in Kiespackungsvorgängen (ISO 13503-2:2006)
Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 2:
Mesurage des propriétés des matériaux de soutenement utilisés dans les opérations de
fracturation hydraulique et de remplissage de gravier (ISO 13503-2:2006)
Ta slovenski standard je istoveten z: EN ISO 13503-2:2006
ICS:
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13503-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2006
ICS 75.100
English Version
Petroleum and natural gas industries - Completion fluids and
materials - Part 2: Measurement of properties of proppants used
in hydraulic fracturing and gravel-packing operations (ISO
13503-2:2006)
Industries du pétrole et du gaz naturel - Fluides de Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten
complétion et matériaux - Partie 2: Mesurage des und -materialien - Teil 2: Messung der Eigenschaften von
propriétés des matériaux de soutènement utilisés dans les Stützmaterialien zum Einsatz bei hydraulischen
opérations de fracturation hydraulique et de remplissage de Fraktionierungs- und in Kiespackungsvorgängen (ISO
gravier (ISO 13503-2:2006) 13503-2:2006)
This European Standard was approved by CEN on 22 September 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13503-2:2006: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 13503-2:2006) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2007, and conflicting national standards
shall be withdrawn at the latest by May 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 13503-2:2006 has been approved by CEN as EN ISO 13503-2:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13503-2
First edition
2006-11-01
Petroleum and natural gas industries —
Completion fluids and materials —
Part 2:
Measurement of properties of proppants
used in hydraulic fracturing and
gravel-packing operations
Industries du pétrole et du gaz naturel — Fluides de complétion et
matériaux —
Partie 2: Mesurage des propriétés des matériaux de soutènement
utilisés dans les opérations de fracturation hydraulique et de
remplissage de gravier
Reference number
ISO 13503-2:2006(E)
©
ISO 2006
ISO 13503-2:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 13503-2:2006(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Abbreviations . 1
4 Standard proppant sampling procedure .2
4.1 General. 2
4.2 Particle segregation. 2
4.3 Equipment . 2
4.4 Number of required samples — Bulk. 4
4.5 Sampling —Bulk material . 5
4.6 Sampling — Bagged material . 5
5 Sample handling and storage. 5
5.1 Sample reduction. 5
5.2 Sample splitting . 5
5.3 Sample and record retention and storage .5
6 Sieve analysis . 6
6.1 Purpose. 6
6.2 Description . 6
6.3 Equipment and materials . 6
6.4 Procedure . 6
6.5 Calculation of the mean diameter, median diameter and standard deviation. 7
6.6 Sieve calibration . 9
7 Proppant sphericity and roundness . 11
7.1 Purpose. 11
7.2 Description . 12
7.3 Apparatus capability. 12
7.4 Procedure . 12
7.5 Alternate method for determining average sphericity and roundness . 13
8 Acid solubility . 13
8.1 Purpose. 13
8.2 Description . 13
8.3 Equipment and materials . 14
8.4 Procedure . 14
9 Turbidity test . 15
9.1 Purpose. 15
9.2 Description . 16
9.3 Equipment and materials . 16
9.4 Equipment calibration . 16
9.5 Procedure . 16
10 Procedures for determining proppant bulk density, apparent density and absolute density. 17
10.1 Purpose. 17
10.2 Description . 17
10.3 Bulk density. 17
10.4 Apparent density. 19
10.5 Absolute density. 21
ISO 13503-2:2006(E)
11 Proppant crush-resistance test . 21
11.1 Purpose . 21
11.2 Description. 21
11.3 Equipment and materials . 22
11.4 Sample preparation.
...

SLOVENSKI STANDARD
01-januar-2007
Industrija za predelavo nafte in zemeljskega plina - Tekočine in materiali za
zaključna dela - 2. del: Merjenje lastnosti podpornih materialov, ki se uporabljajo v
postopkih frakcioniranja in pri filtrskih zasipih s prodom (ISO 13503-2:2006)
Petroleum and natural gas industries - Completion fluids and materials - Part 2:
Measurement of properties of proppants used in hydraulic fracturing and gravel-packing
operations (ISO 13503-2:2006)
Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und -materialien - Teil 2:
Messung der Eigenschaften von Stützmaterialien zum Einsatz bei hydraulischen
Fraktionierungs- und in Kiespackungsvorgängen (ISO 13503-2:2006)
Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 2:
Mesurage des propriétés des matériaux de soutenement utilisés dans les opérations de
fracturation hydraulique et de remplissage de gravier (ISO 13503-2:2006)
Ta slovenski standard je istoveten z: EN ISO 13503-2:2006
ICS:
75.100 Maziva Lubricants, industrial oils and
related products
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13503-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2006
ICS 75.100
English Version
Petroleum and natural gas industries - Completion fluids and
materials - Part 2: Measurement of properties of proppants used
in hydraulic fracturing and gravel-packing operations (ISO
13503-2:2006)
Industries du pétrole et du gaz naturel - Fluides de Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten
complétion et matériaux - Partie 2: Mesurage des und -materialien - Teil 2: Messung der Eigenschaften von
propriétés des matériaux de soutènement utilisés dans les Stützmaterialien zum Einsatz bei hydraulischen
opérations de fracturation hydraulique et de remplissage de Fraktionierungs- und in Kiespackungsvorgängen (ISO
gravier (ISO 13503-2:2006) 13503-2:2006)
This European Standard was approved by CEN on 22 September 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13503-2:2006: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 13503-2:2006) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2007, and conflicting national standards
shall be withdrawn at the latest by May 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 13503-2:2006 has been approved by CEN as EN ISO 13503-2:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13503-2
First edition
2006-11-01
Petroleum and natural gas industries —
Completion fluids and materials —
Part 2:
Measurement of properties of proppants
used in hydraulic fracturing and
gravel-packing operations
Industries du pétrole et du gaz naturel — Fluides de complétion et
matériaux —
Partie 2: Mesurage des propriétés des matériaux de soutènement
utilisés dans les opérations de fracturation hydraulique et de
remplissage de gravier
Reference number
ISO 13503-2:2006(E)
©
ISO 2006
ISO 13503-2:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 13503-2:2006(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Abbreviations . 1
4 Standard proppant sampling procedure .2
4.1 General. 2
4.2 Particle segregation. 2
4.3 Equipment . 2
4.4 Number of required samples — Bulk. 4
4.5 Sampling —Bulk material . 5
4.6 Sampling — Bagged material . 5
5 Sample handling and storage. 5
5.1 Sample reduction. 5
5.2 Sample splitting . 5
5.3 Sample and record retention and storage .5
6 Sieve analysis . 6
6.1 Purpose. 6
6.2 Description . 6
6.3 Equipment and materials . 6
6.4 Procedure . 6
6.5 Calculation of the mean diameter, median diameter and standard deviation. 7
6.6 Sieve calibration . 9
7 Proppant sphericity and roundness . 11
7.1 Purpose. 11
7.2 Description . 12
7.3 Apparatus capability. 12
7.4 Procedure . 12
7.5 Alternate method for determining average sphericity and roundness . 13
8 Acid solubility . 13
8.1 Purpose. 13
8.2 Description . 13
8.3 Equipment and materials . 14
8.4 Procedure . 14
9 Turbidity test . 15
9.1 Purpose. 15
9.2 Description . 16
9.3 Equipment and materials . 16
9.4 Equipment calibration . 16
9.5 Procedure . 16
10 Procedures for determining proppant bulk density, apparent density and absolute density. 17
10.1 Purpose. 17
10.2 Description . 17
10.3 Bulk density. 17
10.4 Apparent density. 19
10.5 Absolute density. 21
ISO 13503-2:2006(E)
11 Proppant crush-resistance test . 21
11.1 Purpose . 21
11.2 Description. 21
11.3 Equipment and materials .
...