Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C

This standard specifies the characteristics of lockbolts with 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series, for use in aerospace applications.
Classification : 1 100 MPa / 315 °C
In both versions, i.e. with and without pintail these lockbolts fulfill the same function when installed and are statically / dynamically equivalent.
They are intended to be used with collars to EN 4174 or EN 4175.

Luft- und Raumfahrt - Passniete, mit 100° normalem Senkkopf, Schertyp, aus Titanlegierung TI-P64001, anodisiert, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C

Diese Norm legt die Merkmale von Passnieten mit 100° normalen Senkkopf, für Scherbeanspruchung, aus Titanlegierung TI P64001, anodisiert, metrische Reihe, für Anwendungen in der Luft- und Raumfahrt fest.
Klasse: 1 100 MPa  )/315 °C )
In beiden Ausführungen, d. h. mit und ohne Abrissteil, erfüllen diese Passniete nach dem Einbau die gleiche Funktion und sind statisch und dynamisch gleichwertig.
Sie sind für die Verwendung mit Schließringen nach EN 4174 oder EN 4175 bestimmt.

Série aérospatiale - Rivets à bague sertie, à tête fraisée 100° normale, à cisaillement, à tolérance serrée, en alliage de titane TI-P64001, anodisés, série métrique - Classification : 1 100 MPa (à température ambiante) / 315 °C

Aeronavtika - Zapirni vijaki, 100° ugreznjena glava, strižni tip, ozka toleranca, iz titanove zlitine TI-P64001, anodizirani, metrska serija - Klasifikacija: 1 100 MPa (pri temperaturi okolice) / 315 °C

General Information

Status
Published
Publication Date
11-Apr-2006
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry

Buy Standard

Standard
EN 4173:2008
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Zapirni vijaki, 100° ugreznjena glava, strižni tip, ozka toleranca, iz titanove zlitine TI-P64001, anodizirani, metrska serija - Klasifikacija: 1 100 MPa (pri temperaturi okolice) / 315 °CLuft- und Raumfahrt - Passniete, mit 100°

normalem Senkkopf, Schertyp, aus Titanlegierung TI-P64001, anodisiert, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °CSérie aérospatiale - Rivets à bague sertie, à tête fraisée 100°

normale, à cisaillement, à tolérance serrée, en alliage de titane TI-P64001, anodisés, série métrique - Classification : 1 100 MPa (à température ambiante) / 315 °CAerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 4173:2006SIST EN 4173:2008en,de01-junij-2008SIST EN 4173:2008SLOVENSKI

STANDARD
SIST EN 4173:2008
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4173
April 2006 ICS 49.030.60 English Version
Aerospace series - Lockbolts, 100

countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C

Série aérospatiale - Rivets à bague sertie, à tête fraisée 100

normale, à cisaillement, à tolérance serrée, en alliage de titane TI-P64001, anodisés, série métrique - Classification : 1 100 MPa (à température ambiante) / 315 °C

Luft- und Raumfahrt - Paßniete, mit 100

normalem Senkkopf, Schertyp, aus Titanlegierung TI-P64001, anodisiert, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C This European Standard was approved by CEN on 13 January 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36

B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4173:2006: ESIST EN 4173:2008

EN 4173:2006 (E) 2 Contents Page Foreword..........................................................................................................................................................3 1 Scope...................................................................................................................................................4 2 Normative references.........................................................................................................................4 3 Required characteristics....................................................................................................................4 4 Description..........................................................................................................................................7 5 Marking................................................................................................................................................7 6 Technical specification.......................................................................................................................7

SIST EN 4173:2008

EN 4173:2006 (E) 3 Foreword This European Standard (EN 4173:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4173:2008

EN 4173:2006 (E) 4 1 Scope This standard specifies the characteristics of lockbolts with 100° countersunk normal head, sheartype,

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.