FprEN ISO 15614-5

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/FDIS 15614-5:2023)

This document specifies how a preliminary welding procedure specification (pWPS) is qualified by welding procedure tests.
This document specifies the conditions for the execution of welding procedure tests and the qualification range for welding procedures for all practical welding operations within the range of variables listed in Clause 8.
This document specifies the required tests. Additional tests can be required by application standards.
This document applies to the arc welding of titanium, zirconium and their alloys in all product forms. Arc welding is covered by the following processes in accordance with ISO 4063:
131 – metal inert gas welding, MIG welding;
14 – tungsten inert gas welding, TIG welding;
15 – plasma arc welding.
The principles of this document can be applied to other fusion welding processes.

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 5: Lichtbogenschweißen von Titan, Zirkonium und ihren Legierungen (ISO/FDIS 15614‑5:2023)

Dieses Dokument legt fest, wie eine vorläufige Schweißanweisung (pWPS, en: preliminary welding procedure specification) durch Schweißverfahrensprüfungen qualifiziert wird.
Dieses Dokument legt die Bedingungen für die Durchführung der Schweißverfahrensprüfungen und den Qualifizierungsbereich für Schweißverfahren für alle praktischen schweißtechnischen Tätigkeiten innerhalb des Bereiches der Einflussgrößen nach Abschnitt 8 fest.
Dieses Dokument legt die geforderten Prüfungen fest. Zusätzliche Prüfungen können durch Anwendungsnormen gefordert werden.
Dieses Dokument wird angewendet beim Lichtbogenschweißen von Titan, Zirconium und ihren Legierungen in allen Produktformen. Lichtbogenschweißen umfasst die folgenden Schweißprozesse nach ISO 4063:
131 — Metall Inertgasschweißen (MIG Schweißen);
14 — Wolfram Inertgasschweißen (WIG Schweißen);
15 — Plasmaschweißen.
Die Grundsätze dieses Dokuments können bei anderen Schmelzschweißverfahren angewendet werden.

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 5: Soudage à l'arc sur titane, zirconium et leurs alliages (ISO/FDIS 15614-5:2023)

Le présent document spécifie comment un descriptif de mode opératoire de soudage préliminaire (DMOS-P) est qualifié par épreuve.
Le présent document spécifie les conditions d'exécution des épreuves de qualification de mode opératoire de soudage et le domaine de validité du mode opératoire de soudage, pour toutes les opérations pratiques de soudage englobant la liste des variables mentionnées à l'Article 8.
Le présent document spécifie les contrôles, examens et essais à réaliser. Des contrôles, examens et essais complémentaires peuvent être exigés par des normes d'application.
Le présent document s’applique au soudage à l’arc du titane, du zirconium et de leurs alliages sous toutes formes. Le soudage à l’arc est couvert par les procédés suivants conformément à l’ISO 4063:
131 – soudage à l’arc sous protection de gaz inerte (soudage MIG) avec fil plein;
14 – soudage à l’arc sous protection de gaz inerte avec électrode de tungstène (soudage TIG);
15 – soudage plasma.
Les principes du présent document peuvent s’appliquer à d’autres procédés de soudage par fusion.

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega postopka - 5. del: Obločno varjenje titana, cirkonija in njunih zlitin (ISO/FDIS 15614-5:2023)

General Information

• Status: Not Published
• Publication Date: 07-Apr-2024
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 6055 - CEN Ratification completed (DOR) - Publishing
• Start Date: 06-Feb-2024
• Completion Date: 06-Feb-2024
• Directive: 2014/29/EU - Directive 2014/29/EU of The European Parliament and of the Council of 26 February 2016 on the harmonisation of the laws of the Member States relating to the making available on the market of simple pressure vessels
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/89/2 - Standardization mandate to CEN concerning supporting standards in the context of pressure vessels
• Ref Project: kSIST prEN ISO 15614-5:2023 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/FDIS 15614-5:2023)

Relations

• Revises: EN ISO 15614-5:2004 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 15614-5:2022
01-april-2022
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega
postopka - 5. del: Obločno varjenje titana, cirkonija in njunih zlitin (ISO/DIS 15614-
5:2022)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/DIS
15614-5:2022)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 5: Lichtbogenschweißen von Titan, Zirkonium und ihren
Legierungen (ISO/DIS 15614‑5:2022)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 5:
Soudage à l'arc sur titane, zirconium et leurs alliages (ISO/DIS 15614-5:2022)
Ta slovenski standard je istoveten z: prEN ISO 15614-5
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.50 Titan in titanove zlitine Titanium and titanium alloys
oSIST prEN ISO 15614-5:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 15614-5:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 15614-5:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15614-5
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-02-03 2022-04-28
Specification and qualification of welding procedures for
metallic materials — Welding procedure test —
Part 5:
Arc welding of titanium, zirconium and their alloys
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de
qualification d'un mode opératoire de soudage —
Partie 5: Soudage à l'arc sur titane, zirconium et leurs alliages
ICS: 25.160.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15614-5:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 15614-5:2022
ISO/DIS 15614-5:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 15614-5:2022
ISO/DIS 15614-5:2022(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .2
4 Preliminary welding procedure specification (pWPS) .2
5 Welding procedure test .
...