EN ISO 7048:2011

Cross-recessed cheese head screws (ISO 7048:2011)

ISO 7048:2011 specifies the characteristics of cross-recessed cheese head screws of product grade A, with threads from M2,5 to M8 inclusive, and with cross recesses of types H and Z.

Zylinderschrauben mit Kreuzschlitz (ISO 7048:2011)

Diese Internationale Norm legt die Eigenschaften von Zylinderschrauben mit Kreuzschlitz, Produktklasse A, mit Gewinden von M2,5 bis M8 und mit Kreuzschlitzen der Formen H und Z fest.
ANMERKUNG Die Kopfmaße dieser Schrauben sind mit denen der Schlitzschrauben nach ISO 1207 identisch.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 und ISO 4759-1.

Vis à métaux à tête cylindrique à empreinte cruciforme (ISO 7048:2011)

L'ISO 7048:2011 spécifie les caractéristiques des vis à métaux à tête cylindrique à empreinte cruciforme, de grade A, de diamètre de filetage M2,5 à M8 inclus et avec des empreintes cruciformes de types H et Z.

Vijaki z lečasto valjasto glavo s križno zarezo (ISO 7048:2011)

ISO 7048:2010 določa značilnosti vijakov z lečasto valjasto glavo s križno zarezo razreda izdelave A, z navoji od M2,5 do vključno z M8, s križnimi zarezami tipa H in Z.

General Information

• Status: Published
• Publication Date: 31-Mar-2011
• Withdrawal Date: 30-Oct-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Apr-2011
• Completion Date: 01-Apr-2011
• Ref Project: SIST EN ISO 7048:2012 - Cross-recessed cheese head screws (ISO 7048:2011)

Relations

• Replaces: EN ISO 7048:1998 - Cross recessed cheese head screws (ISO 7048:1998)
• Effective Date: 12-Apr-2010

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2012
1DGRPHãþD
SIST EN ISO 7048:2001
9LMDNL]OHþDVWRYDOMDVWRJODYRVNULåQR]DUH]R,62
Cross-recessed cheese head screws (ISO 7048:2011)
Zylinderschrauben mit Kreuzschlitz (ISO 7048:2011)
Vis à métaux à tête cylindrique à empreinte cruciforme (ISO 7048:2011)
Ta slovenski standard je istoveten z: EN ISO 7048:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 7048
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2011
ICS 21.060.10 Supersedes EN ISO 7048:1998
English Version
Cross-recessed cheese head screws (ISO 7048:2011)
Vis à métaux à tête cylindrique à empreinte cruciforme Zylinderschrauben mit Kreuzschlitz (ISO 7048:2011)
(ISO 7048:2011)
This European Standard was approved by CEN on 31 January 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7048:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 7048:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7048:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 7048:2011 has been approved by CEN as a EN ISO 7048:2011 without any modification.

INTERNATIONAL ISO
STANDARD 7048
Second edition
2011-04-01
Cross-recessed cheese head screws
Vis à métaux à tête cylindrique à empreinte cruciforme

Reference number
ISO 7048:2011(E)
©
ISO 2011
ISO 7048:2011(E)
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

ISO 7048:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7048 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 10, Product
standards for fasteners.
This second edition cancels and replaces the first edition (ISO 7048:1998), of which it constitutes a minor
revision.
...