EN ISP 10609-11:1996
(Main)Information technology - International Standardized Profile TB, TC, TD and TE - Connection-mode Transport Service over connection-mode Network Service - Part 11: CSMA/CD subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10609-11:1994)
Information technology - International Standardized Profile TB, TC, TD and TE - Connection-mode Transport Service over connection-mode Network Service - Part 11: CSMA/CD subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10609-11:1994)
Technologie de l'information - Profils normalisés internationaux TB, TC, TD et TE - Service de transport en mode connexion - Partie 11: Prescriptions dépendantes du sous-réseau du AMDP-DC, dépendantes des supports (ISO/IEC ISP 10609-11:1994)
Information technology - International Standardized Profile TB, TC, TD and TE - Connection-mode Transport Service over connection-mode Network Service - Part 11: CSMA/CD subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10609-11:1994)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISP 10609-11:1997
01-december-1997
Information technology - International Standardized Profile TB, TC, TD and TE -
Connection-mode Transport Service over connection-mode Network Service - Part
11: CSMA/CD subnetwork-dependent, media-dependent requirements (ISO/IEC ISP
10609-11:1994)
Information technology - International Standardized Profile TB, TC, TD and TE -
Connection-mode Transport Service over connection-mode Network Service - Part 11:
CSMA/CD subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10609-
11:1994)
Technologie de l'information - Profils normalisés internationaux TB, TC, TD et TE -
Service de transport en mode connexion - Partie 11: Prescriptions dépendantes du sous-
réseau du AMDP-DC, dépendantes des supports (ISO/IEC ISP 10609-11:1994)
Ta slovenski standard je istoveten z: EN ISP 10609-11:1996
ICS:
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN ISP 10609-11:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISP 10609-11:1997
---------------------- Page: 2 ----------------------
SIST EN ISP 10609-11:1997
---------------------- Page: 3 ----------------------
SIST EN ISP 10609-11:1997
---------------------- Page: 4 ----------------------
SIST EN ISP 10609-11:1997
INTERNATIONAL ISO/IEC
STANDARDIZED
ISP
PROFILE 106094 1
First edition
1994-12-15
Information technology - International
Standardized Profiles TB, TC, TD and
TE - Connection-mode Transport Service
over connection-mode Network Service -
Part 11:
CSMA/CD subnetwork-dependent,
media-dependent requirements
Technologies de I ’informa tion - Profils normalisks internationaux TB, TC,
TD et TE - Service de transport en mode connexion sur Service de
r&eau en mode connexion -
Partie 17: Prescriptions dependantes du sous-r&eau du AMDP-DC,
dbpendan tes des supports
Reference number
ISO/lEC KP 10609-11:1994(E)
---------------------- Page: 5 ----------------------
SIST EN ISP 10609-11:1997
ISO/IEC ISP 10609=11:1994(E)
Page
Contents
”
. . .
111
Foreword .
V
Introduction .
1
1 Scope .
.................................................... 1
2 Normative references
2
Definitions .
3
2
Abbreviations .
4
2
Requirements .
5
2
5.1 Static conformance requirements .
5.2 Dynamit conformance requirements . 3
4
.........................................
Annex A ISPICS requirements list (normative)
4
.......................................................
A.1 Introduction
4
..............................................
A.2 Notation and conventions
4
..............................................
A.3 IPRL for ISO/IEC 8802-3
.............................. 5
Annex B Assumed base Standard PICS proforma (normative)
....................................................... 5
B.l Introduction
.................................................... 5
B.2 ISO/IEC 8802-3
OISO/IEC 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any
form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in
writing from the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH-121 1 Geneve l Switzerland
Printed in Switzerland
ii
---------------------- Page: 6 ----------------------
SIST EN ISP 10609-11:1997
ISO/IEC ISP 10609=11:1994(E)
0 ISO/IEC
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
together form a System for worldwide standardization as a whole. National bodies that are members of ISO or
IEC participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-govemmental,
in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
In addition to developing International Standards, ISO/IEC JTC 1 has created a Special Group on Functional
Standardization (ISO/IEC JTC I/SGFS) for the processing of International Standardized Profiles.
An International Standardized Profile is an intemationally agreed, harmonized document which identifies a
Standard or group of Standards, together with Options and Parameters, necessary to accomplish a function or set
of functions.
Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an
the national bodies casting a vote.
International S tandardized Profile requires approval by at least 75% of
S-liaison may be established with JTC l/SGFS by specialized organizations involved in the work of functional
standardization. This part of ISO/IEC ISP 10609 was prepared with the collaboration of the following S-liaisons:
- Asia-Oceania Workshop (AOW);
- European Workshop for Open Systems (EWOS);
- Open Systems Environment Implernentors’ Workshop (OIW).
ISO/IEC ISP 10609 consists of several Parts, under the general title Information technology - International
Standardized Profiles TB, TC, TD and TE - Connection-mode Transport Service over connection-mode Network
Service:
- Part 1: Subnetwork-type independent requirements for Group TB
- Part 2: Subnetwork-type independent requirements for Group TC
- Part 3: Subnetwork-type independent requirements for Group TD
- Part 4: Subnetwork-type independent requirements for Group TE
- Part 5: Definition of profiles TBI 111 lTBl121
- Part 6: Definition of profiles TC1 111 /TC1 121
- Part 7: Definition of profiles TDllllITDll21
- Part 8: Definition of profiles TElllI/TE1121
Part 9: Subnetwork-type dependent requirements for Network Layer, Data Link Layer and Physical
Layer concerning permanent access to a packet switched data network using virtual calls
. . .
111
---------------------- Page: 7 ----------------------
SIST EN ISP 10609-11:1997
ISO/IEC ISP 10609=11:1994(E) 0 ISO/IEC
Part IO: LAN subnetwork-dependent, media-independent requirements
- Part 11: CSMAICD LAN subnetwork-dependent, media-dependent reguirements
- Part 12: Definition of Profile TC51, provision of the OS1 connection-mode Transport Service using
the OSI connection-mode Network Service in an End System attached to a CSMAICD LAN
- Part 14: Definition of profile TC53, Provision of the OS1 connection-mode Transport Service using
the OS1 connection-mode Network Service in an End System attached to a Token Ring LAN
This part of ISO/IEC ISP 10609 contains two annexes, which are normative.
iv
---------------------- Page: 8 ----------------------
SIST EN ISP 10609-11:1997
ISO/IEC ISP 10609911:1994(E)
0 ISO/IEC
Introduction
This International Standardized Profile (ISP) is dcfined in accordance with the principles specified by ISO/IEC
Framework and taxonomy of International Standardized
Technical Report 10000, “Information technology -
Profiles ”.
The context of Functional Standardization is one area in the overall field of Information Technology (IT)
standardization activities, covering base Standards, profiles, and registration mechanisms. A Profile defines a
combination of base Standards that collectively perform a specific weil-defined IT function. Profiles standardize
the use of Options and other variations in the base Standards, and provide a base for the development of uniform,
intemationally recognized System tests.
ISPs are produced not simply to “legitimize” a particular choice of base Standards and Options, but to promote
real System interoperability. One of the most important roles for an ISP is to serve as the basis for the
development (by organizations other than ISO and IEC) of internationally recognized test methods. The
development and widespread acceptance of tests based on this and other ISPs is crucial to the successful
realization of this goal.
ISO/IEC ISP 10609 consists of several parts, of which this is part 11. Parts 1 to 4 of ISO/IEC ISP 10609 specify
Profile requirements that are subnetwork-independent, for each of the transport groups TB, TC, TD and TE,
respectively. There are further Parts which specify subnetwork-dependent and media-dependent requirements. In
addition, for each individual Profile there is a part of ISO/IEC ISP 10609 which identifies the specific
requirements of that Profile, making reference to appropriate material from the relevant subnetwork-independent
and subnetwork-dependent Parts.
V
---------------------- Page: 9 ----------------------
SIST EN ISP 10609-11:1997
ISO/IEC ISP 10609=11:1994(E)
0 ISO/IEC
This page is intentionally left blank.
Vl
---------------------- Page: 10 ----------------------
SIST EN ISP 10609-11:1997
INTERNATIONAL STANDARDIZED PROFILE OISO/IEC ISOIIEC ISP 10609~11:1994(E)
International Standardized
Information technology -
Connection-mode Transport
Profiles TB, TC, TD and TE -
Service over connection-mode Network Service -
Part 11
CSMAKD LAN subnetwork-dependent, media-dependent
requirements
1 Scope
This International Standardized Profile is applicable to end Systems concerned with operating in the Open Systems
Interconnection (OSI) environment. It specifies a combination of OS1 Standards, which collectively provide the
connection-mode Transport Service using the connection-mode Network Service.
This part of ISO/IEC ISP 10609 applies only to communication over those subnetworks which are ISO/IEC
8802-3 CSMA/CD LANs.
Normative references
2
The following documents contain provisions which, through reference in this text, constitute provisions of this
part of ISO/IEC ISP 10609. At the time of publication, the editions indicated were valid. All documents are
subject to revision, and Parties to agreements based on this part of ISO/IEC ISP 10609 are warned against
automatically applying any more recent editions of the documents listed below, since the nature of references
made by ISPs to such documents is that they ma
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.