EN ISO 3035:2011

Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)

2011-01-14 EMA: // final draft received in ISO/CS (see notification in dataservice from 2011-01-13).

Wellpappe - Bestimmung des Flachstauchwiderstandes (ISO 3035:2011)

Diese Internationale Norm legt ein Prüfverfahren für die Bestimmung des Flachstauchwiderstandes von
Wellpappe fest, das bei der Herstellung von Wellpappe-Transportbehältern angewendet wird.
Diese Internationale Norm ist für einseitige und einwellige Wellpappe (beidseitig kaschiert) anwendbar.
Diese Internationale Norm ist nicht für doppelwellige Wellpappe und für Mikrowellen-Wellpappe anwendbar,
da der Endpunkt der Prüfung nicht eindeutig bestimmt oder erkennbar ist.

Carton ondulé - Détermination de la résistance à la compression à plat (ISO 3035:2011)

L'ISO 3035:2011 spécifie une méthode de détermination de la résistance à la compression à plat du carton ondulé utilisé dans la fabrication d'emballages d'expédition.
Elle est applicable au carton ondulé simple face et au carton ondulé simple cannelure (double face).
Elle n'est pas applicable au carton ondulé double cannelure (double-double face), ni au carton ondulé microcannelures, puisque le point final de l'essai n'est pas clairement défini ou observable.

Valoviti karton - Ugotavljanje odpornosti proti sploščenju (preskus FCT) (ISO 3035:2011)

Ta mednarodni standard določa metodo za ugotavljanje odpornosti proti sploščenju valovitega kartona, ki se uporablja pri proizvodnji transportne embalaže. Ta mednarodni standard se uporablja za dvoslojni in troslojni valoviti karton.

General Information

• Status: Published
• Publication Date: 31-Oct-2011
• Withdrawal Date: 30-May-2012
• ICS: 85.060 - Paper and board
• ICS: 85.080.30 - Cardboard
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172 - Pulp, paper and board
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Nov-2011
• Completion Date: 01-Nov-2011
• Ref Project: SIST EN ISO 3035:2012 - Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)

Relations

• Replaces: EN 23035:1994 - Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982)
• Effective Date: 05-Nov-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3035:2012
01-maj-2012
1DGRPHãþD
SIST EN 23035:2000
9DORYLWLNDUWRQ8JRWDYOMDQMHRGSRUQRVWLSURWLVSORãþHQMXSUHVNXV)&7,62

Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
Wellpappe - Bestimmung des Flachstauchwiderstandes (ISO 3035:2011)
Carton ondulé - Détermination de la résistance à la compression à plat (ISO 3035:2011)
Ta slovenski standard je istoveten z: EN ISO 3035:2011
ICS:
85.060 Papir, karton in lepenka Paper and board
SIST EN ISO 3035:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3035:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 3035:2012


EUROPEAN STANDARD
EN ISO 3035

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2011
ICS 85.060 Supersedes EN 23035:1994
English Version
Corrugated fibreboard - Determination of flat crush resistance
(ISO 3035:2011)
Carton ondulé - Détermination de la résistance à la Wellpappe - Bestimmung des Flachstauchwiderstandes
compression à plat (ISO 3035:2011) (ISO 3035:2011)
This European Standard was approved by CEN on 31 October 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3035:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3035:2012
EN ISO 3035:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3035:2012
EN ISO 3035:2011 (E)
Foreword
This document (EN ISO 3035:2011) has been prepared by Technical Committee ISO/TC 6 "Paper, board and
pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the
latest by May 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 23035:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3035:2011 has been approved by CEN as a EN ISO 3035:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 3035:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 3035:2012
INTERNATIONAL ISO
STANDARD 3035
Third edition
2011-11-01
Corrugated fibreboard — Determination
of flat crush resistance
Carton ondulé — Détermination de la résistance à la compression à plat
Reference number
ISO 3035:2011(E)
©
ISO 2011

---------------------- Page: 7 ----------------------

SIST EN ISO 3035:2012
ISO 3035:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in
...