EN 13443-2:2005

Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing

This document specifies requirements relating to the construction, performance and methods of testing for mechanical filters for the removal of suspended matter in drinking water installations inside buildings. It applies to filters with a filtration rating from 1 µm up to less than 80 µm and which are intended for use in systems with a minimum pressure rating of PN 6, connections between DN 15 and DN 100 and service temperature of less than 30 °C.
This document is applicable to back-washable filters, integral filters and those designed for replaceable cartridges. It only concerns units that are permanently connected to the mains supply at point of entry or point of use.
Part 1 of this standard (EN 13443-1) is a separate document and deals with filters with a particle rating between
80 mm and 150 mm.

Anlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Mechanisch wirkende Filter - Teil 2: Filterfeinheit 1 µm bis unter 80 µm - Anforderungen an Ausführung, Sicherheit und Prüfung

Dieses Dokument legt Anforderungen in Bezug auf Konstruktion, Betriebsverhalten und Prüfverfahren für
mechanisch wirkende Filter zur Beseitigung von Schwebstoffen in der Trinkwasser-Installation innerhalb von
Gebäuden fest. Sie gilt für Filter mit einer Filterfeinheit von 1 µm bis unter 80 µm für den Einsatz in
Installationen mit einem Mindestnenndruck PN 6, Anschlüssen zwischen DN 15 und DN 100 und einer
Betriebstemperatur von unter 30 °C.
Dieses Dokument gilt für rückspülbare Filter, Filterbaugruppen und Filter mit auswechselbaren Einsätzen. Es
bezieht sich nur auf fest installierte Geräte am Eintrittspunkt der Anschlussleitung oder an der Verbrauchs-
stelle.
Teil 1 dieser Norm (EN 13443-1) ist ein separates Dokument und behandelt Filter mit einer Filterfeinheit
zwischen 80 µm und 150 µm.

Appareil de traitement d'eau à l'intérieur des bâtiments - Filtres mécaniques - Partie 2: Particules de dimension comprise entre 1 µm et 80 µm - Exigences de performances, de sécurité et d'essais

Ce document spécifie les exigences relatives à la fabrication, aux performances et aux méthodes d'essais pour les filtres mécaniques utilisés pour supprimer les particules en suspension dans les installations d'eau potable à l'intérieur des bâtiments. Il s'applique aux filtres ayant un seuil de filtration de dimension comprise entre 1 µm et 80 µm utilisés dans les systèmes de pression minimale de PN 6, raccords compris entre DN 15 et DN 100 et de température opérationnelle minimale de 30 °C.
Ce document est applicable aux filtres à lavage à contre-courant, aux filtres complets et aux filtres dont la conception prévoit le changement de la cartouche. Il ne concerne que les filtres raccordés en permanence au point d'entrée du réseau de distribution d'eau ou au point d'utilisation.
La partie 1 de cette norme (EN 13443-1) est un document séparé et traite des filtres avec une particule de taille comprise entre 80 µm et 150 µm.

Oprema, ki se uporablja za pripravo pitne vode v stavbah – Mehanski filtri – 2. del: Filtri za izločitev delcev z velikostjo od 1 µm do 80 µm – Zahteve za delovanje, varnost in preskušanje

General Information

• Status: Withdrawn
• Publication Date: 08-Feb-2005
• Withdrawal Date: 12-Jun-2007
• ICS: 13.060.20 - Drinking water
• ICS: 91.140.60 - Water supply systems
• Technical Committee: CEN/TC 164 - Water supply
• Drafting Committee: CEN/TC 164 - Water supply
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Jun-2007
• Completion Date: 13-Jun-2007
• Ref Project: SIST EN 13443-2:2005 - Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing

Relations

• Merged Into: EN 13443-2:2005+A1:2007 - Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testingAppareil de traitement d'eau a l'intérieur des bâtiments - Filtres mécaniques - Partie 2: Particules de dimension comprise entre 1 µm et 80 µm - Exigences de performances, de sécurité et d'essaisAnlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Mechanisch wirkende Filter - Teil 2: Filterfeinheit 1 µm bis unter 80 µm - Anforderungen an Ausführung, Sicherheit und PrüfungTa slovenski standard je istoveten z:EN 13443-2:2005SIST EN 13443-2:2005en91.140.60Sistemi za oskrbo z vodoWater supply systems13.060.20Pitna vodaDrinking waterICS:SLOVENSKI
STANDARDSIST EN 13443-2:200501-maj-2005







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13443-2February 2005ICS 13.060.20; 91.140.60English versionWater conditioning equipment inside buildings - Mechanicalfilters - Part 2: Particle rating 1 µm to less than 80 µm -Requirements for performance, safety and testingÉquipement de conditionnement d'eau à l'intérieur desbâtiments - Filtres mécaniques - Partie 2: Particules detaille 1 µm à 80 µm; Exigences de performances, desécurité et d'essaisAnlagen zur Behandlung von Trinkwasser innerhalb vonGebäuden - Mechanisch wirkende Filter - Teil 2:Filterfeinheit 1 µm bis unter 80 µm - Anforderungen anAusführung, Sicherheit und PrüfungThis European Standard was approved by CEN on 24 December 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13443-2:2005: E



EN 13443-2:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Symbols and abbreviations.8 5 Design requirements.9 6 Performance requirements.10 7 Test procedures.11 8 Technical documents, labelling and marking.38 Annex A (informative)
Typical test reports.40 Annex B (informative)
Typical graphical representation of test results.46 Annex C (normative)
Integrity inspection and measurement of first bubble point.50 Bibliography.53



EN 13443-2:2005 (E) 3 Foreword This document (EN 13443-2:2005) has been prepared by Technical Committee CEN/TC 164 “Water supply”, th
...