EN 14329:2004

Inland navigation vessels - Installation of berths and loading areas

This European Standard applies to the installation of berths and loading areas for inland navigation vessels.
It also applies to berths and loading areas for inland navigation vessels in seaports.
This standard does not apply to Ro-Ro systems, ferry terminals, floating equipment, bunker stations, landing stages used for passenger changeovers or for holding areas.

Fahrzeuge der Binnenschifffahrt - Einrichtung von Liege- und Umschlagplätzen

Diese Europäische Norm gilt für die Einrichtungen von Liege- und Umschlagplätzen für Fahrzeuge der Binnenschifffahrt.
Sie gilt auch für Liege- und Umschlagplätze für Fahrzeuge der Binnenschifffahrt in Seehäfen.
Die Norm gilt nicht für Ro-Ro-Verkehr, Fähranleger, schwimmende Anlegestellen und Bunkerstationen sowie Anlegestellen, die dem Fahrgastwechsel dienen.

Bateaux de navigation intérieure - Arrangement de mouillages et d'installation de transbordement

Plovila za celinske vode – Ureditev privezov in natovarjališč

General Information

• Status: Published
• Publication Date: 23-Mar-2004
• ICS: 47.060 - Inland navigation vessels
• Technical Committee: CEN/TC 15 - Inland navigation vessels
• Drafting Committee: CEN/TC 15 - Inland navigation vessels
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Oct-2024
• Completion Date: 15-Oct-2024
• Ref Project: SIST EN 14329:2004 - Inland navigation vessels - Installation of berths and loading areas

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrzeuge der Binnenschifffahrt - Einrichtung von Liege- und UmschlagplätzenBateaux de navigation intérieure - Arrangement de mouillages et d'installation de transbordementInland navigation vessels - Installation of berths and loading areas93.140SULVWDQLãþConstruction of waterways and ports47.060Inland navigation vesselsICS:Ta slovenski standard je istoveten z:EN 14329:2004SIST EN 14329:2004en01-september-2004SIST EN 14329:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14329March 2004ICS 47.060English versionInland navigation vessels - Installation of berths and loadingareasBateaux de navigation intérieure - Arrangement demouillages et d'installation de transbordementFahrzeuge der Binnenschifffahrt - Einrichtung von Liege-und UmschlagplätzenThis European Standard was approved by CEN on 2 February 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14329:2004: ESIST EN 14329:2004

Berths alongside slopes.5 4.4 Mooring systems.6 4.5 Fenders.6 4.6 Stairs and quay ladders.6 4.7
Crossover from inland navigation vessel to shore.10 4.8 Illumination.10 4.9 Safety devices.11 4.10
Additional requirements.11 4.11 Marking.11 Annex A (informative)
Illustration of tops of quay ladders and berms.13 A.1 Tops of quay ladders.13 A.2 Possible design of berms.15
Figures Figure 1 — Staggered stair with landing in a wall recess.7 Figure 2 — Stair at set-back embankment wall with intermediate landing arrangement protecting landing posts.8 Figure 3 — Example of quay ladder in sheet-piled wall recess with round handgrip on the quay.9 Figure A.1 — Top of quay ladder with round handgrip on the quay.13 Figure A.2 — Top of quay ladder with two handgrips recessed at the side on the quay.13 Figure A.3 — Top of quay ladder with recessed transverse handgrip on the quay.14 Figure A.4 — Top of quay ladder head with high handgrip on the quay ladder.14 Figure A.5 — Berms on stepped vertical walls.15 Figure A.6 — Berm on vertical wall with slope.15 Figure A.7 — Berm on stepped slopes.16 Table Table 1 — Minimum illuminance En in lx …………………….………………………………………………………10
In this way, it is intended improving the safety of the users both on the ship and the shore side.
Berths and loading areas may be parts of handling areas, berthing areas and harbours According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 14329:2004

1 Scope This European Standard applies to the installation of berths and loading areas for inland navigation vessels. It also applies to berths and loading areas for inland navigation vessels in seaports. This standard does not apply to Ro-Ro systems, ferry terminals, floating equipment, bunker stations, landing stages used for passenger changeovers or for holding areas. 2 Normative references This standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed hereafter.
For dated references, subsequent amendments to or revisions of any of these publications apply to this standard only when incorporated in it by amendment or revision.
For undated references the latest edition of the publication referred to applies (including amendments).
EN 526, Inland navigation vessels — Gangways with a length not exceeding 8 m - Requirements, types. EN 13056, Inland navigation vessels — Stairs with inclination angles of 30° to < 45° — Requirements, types. EN 13574:2001, Inland navigation vessels — Permanently installed climbing devices with a length not exceeding 5 m. EN 14144, Lifebuoys — Requirements, tests. EN 14145, Holders for lifebuoys. . 3 Terms and definitions
For the purposes of this European Standard, the following definitions apply:
3.1 berth landing place landing stage with mooring systems and shore connections
3.2 loading area berth for loading and unloading inland navigation vessels
3.3 holding area area used just for short-term waiting until the vessels continues its journey or is assigned a berth or loading area
3.4
climbing device stair and quay ladder 3.5 mooring system fixed device for making fast inland navigation vessels SIST EN 14329:2004

4 Requirements 4.1 General requirements Berths and loading area
...