47.060 - Inland navigation vessels

This document applies to boarding stairs for inland navigation vessels. Boarding stairs are used on inland navigation vessels for a safe transition into ship's boats, safe disembarking to the shore or a safe crossing over onto vessels with lower decks.
This document specifies safety requirements on the design, dimensions and strength and test methods.
Boarding stairs are designed for vessels having a boarding height greater than 1,5 m above the light water-line. They can be used up to a height...view more

This document is applicable to stanchions and holders of tiltable and detachable railings (railing type CT and CD according to EN 711 in work areas) for inland navigation vessels. These railings are situated in the side deck areas, where a permanently fitted railing can be an obstacle for loading/discharging operations.
The stanchions are designed for use with handrails and intermediate guardrails made of wire ropes.
Dimensions marked with a ● are safety dimensions and correspond to the stipul...view more

This document applies to outboard ladders for inland navigation vessels. Outboard ladders are used on inland navigation vessels having great side heights to facilitate safe climbing into ship's boats, safe disembarking or safe crossing over onto vessels in the case of significantly different boarding heights.
This document specifies safety requirements on design, dimensions and strength and test conditions for outboard ladders.
Outboard ladders are intended for that range where removable board...view more

This document applies to boarding stairs for inland navigation vessels. Boarding stairs are used on inland navigation vessels for a safe transition into ship's boats, safe disembarking to the shore or a safe crossing over onto vessels with lower decks.
This document specifies safety requirements on the design, dimensions and strength and test methods for outboard stairs.
Boarding stairs are designed for vessels having a boarding height greater than 1,5 m above the light water-line. They can be...view more

This document is applicable to stanchions and holders of tiltable and detachable railings (railing type CT and CD according to EN 711 in work areas) for inland navigation vessels. These railings are situated in the side deck areas, where a permanently fitted railing can be an obstacle for loading/discharging operations.
The stanchions are designed for use with handrails and intermediate guardrails made of wire ropes.

This document applies to outboard ladders for inland navigation vessels. Outboard ladders are used on inland navigation vessels having great side heights to facilitate safe climbing into ship's boats, safe disembarking or safe crossing over onto vessels in the case of significantly different boarding heights.
This document specifies safety requirements on design, dimensions and strength and test conditions for outboard ladders.
Outboard ladders are intended for that range where boarding stairs...view more

This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels. Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified i...view more

This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists.
This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil.
The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can ...view more

This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels.
Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified ...view more

This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists. This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil. The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be...view more

This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels. Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified i...view more

This document applies in connection with EN 15869 1 for the supply of berthed inland navigation vessels with electrical energy.
This part of EN 15869 specifies additional requirements for the on-shore unit of the electrical shore connection.

This document applies in connection with EN 15869 1 for the supply of berthed inland navigation vessels with electrical energy from shore.
This part of EN 15689 specifies additional requirements for the shore connection cable and the on-board unit of the electrical shore connection.

This document specifies requirements for electrical installations for the shore supply of berthing inland navigation vessels with electrical energy, three-phase current 400 V, 50 Hz with a rated current of up to 125 A.
This document applies to the supply of inland navigation vessels in ports and moorings for commercial inland navigation.
This part of EN 15869 specifies general requirements and contains information on the billing procedure.
For the supply of small craft and houseboats in marin...view more

This document applies in connection with EN 15869-1 for the supply of berthed inland navigation vessels with electrical energy.
This document specifies additional requirements for the on-shore unit of the electrical shore connection.

This document specifies requirements for electrical installations for the shore supply of berthing inland navigation vessels with electrical energy, three-phase current 400 V, 50 Hz with a rated current of up to 125 A.
This document applies to the supply of inland navigation vessels in ports and moorings for commercial inland navigation.
This document specifies general requirements and contains information on the billing procedure.
For the supply of small craft and houseboats in marinas and s...view more

This document applies in connection with EN 15869 1 for the supply of berthed inland navigation vessels with electrical energy from shore.
This document specifies additional requirements for the shore connection cable and the feeding unit of the electrical shore connection.

This European Standard specifies the required characteristics for two types a heat-shrinkable, fluoroelastomer sleeving for use in aircraft electrical systems at operating temperatures between -55 °C and 200 °C.
Type A      Thick wall
Type B      Thin wall
This sleeving has good flexibility, is flame retarded and has a thick wall for mechanical protection. It is for use in areas subject to prolonged contamination by aircraft fuel and fluids with the exception of phosphate ester-based hydraulic fluids...view more

ISO 8385:2018 provides a single classification for all types of dredgers designed for loosening, raising, transporting and disposing of dredged material.

This European Standard specifies the design, dimensions, technical requirements and testing of connections for the discharge of waste water produced by inland navigation vessels.
This standard specifies:
-   a connection of a design common on inland navigation vessels which consists of a threaded pipe and quick-release coupling;
-   a connection for vessels with flange ISO 7608 - B1, consisting of an adapter with matching flange and welded threaded pipe and quick-release coupling.