EN ISO 11125-6:1997

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993)

Specifies a test method for the determination of particles with cracks, laminations, voids and shrinkage, of defectively shaped shot, grit and cylindrical particles, of microstructure. Annex A gives information on the international standards series for metallic blast-cleaning abrasives ISO 11124 and ISO 11125.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für metallische Strahlmittel - Teil 6: Bestimmung der Fremdbestandteile (ISO 11125-6:1993)

Dieser Teil von ISO 11125 legt ein Prüfverfahren zur Bestimmung von Fremdbestandteilen in metallischen Strahlmitteln fest.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection - Partie 6: Détermination des matières étrangères (ISO 11125-6:1993)

La présente norme est l'une des parties de l'ISO 11125, qui traite de l'échantillonnage et des essais des abrasifs métalliques destinés à la préparation par projection. Les types d'abrasif métalliques et les prescriptions relatives à chacun figurent dans les différentes parties de l'ISO 11124. Les séries de normes ISO 11124 et ISO 11125 constituent une série cohérente de normes internationales sur les abrasifs métalliques destinés à la préparation par projection. L'annexe A donne des informations sur toutes les parties des deux séries. La présente partie de l'ISO 11125 prescrit une méthode d'essai pour la détermination des matières étrangères dans les abrasifs métalliques destinés à la préparation par projection. L'essai a pour objet d'établir le niveau de contamination de l'abrasif par les matières étrangères. Ce niveau de matières étrangères par exemple oxydes et scories métallurgiques résiduelles, est déterminé par séparation magnétique.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Preskusne metode za kovinske granulate za peskanje - 6. del: Ugotavljanje tujih snovi (ISO 11125-6:1993)

General Information

• Status: Withdrawn
• Publication Date: 17-Jun-1997
• Withdrawal Date: 25-Sep-2018
• ICS: 87.020 - Paint coating processes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 26-Sep-2018
• Ref Project: SIST EN ISO 11125-6:1997 - Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993)

Relations

• Replaced By: EN ISO 11125-6:2018 - Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:2018)
• Effective Date: 11-Jun-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-1997
Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov -
Preskusne metode za kovinske granulate za peskanje - 6. del: Ugotavljanje tujih
snovi (ISO 11125-6:1993)
Preparation of steel substrates before application of paints and related products - Test
methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter
(ISO 11125-6:1993)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für metallische Strahlmittel - Teil 6: Bestimmung der Fremdbestandteile
(ISO 11125-6:1993)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Méthodes d'essai pour abrasifs métalliques destinés a la préparation par
projection - Partie 6: Détermination des matieres étrangeres (ISO 11125-6:1993)
Ta slovenski standard je istoveten z: EN ISO 11125-6:1997
ICS:
25.220.10 Priprava površine Surface preparation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

IhITERNATIONAL
11125-6
STANDARD
First edition
1993-12-15
Preparation of steel Substrates before
application of paints and related
Test methods for metallic
products -
blast-cleaning abrasives -
Part 6:
Determination of foreign matter
PrtZparation des subjectiles d’acier avant application de peintures et de
produits assimik - Methodes d’essai pour abrasifs m&alliques destines
2 Ia prdparation par projection -
Partie 6: DG termina tion des ma tieres 6 trangeres
Reference number
ISO 11125-6:1993(E)
ISO 11125=6:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take patt in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
.Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11125-6 was prepared by Technical Committee
ISOJTC 35, Paints and varnishes, Subcommittee SC 12, Preparation of
steel substra tes be fore applica tion o f paints and related products.
ISO 11125 consists of the following Parts, under the general title Prep-
aration of steel Substrates before application of paints and related
products - Test methods for metallic blast-cleaning abrasives:
- Part 1: Sampling
- Part 2: Determination of particle size distribution
- Part 3: Determination of hardness
- Part 4: Determination of apparent density
- Part 5: Determination of percentage defective particles and of
micros tructure
- Part 6: Determination o f foreign matter
- Part 7: Determination o f moisture
- Part 8: Determination of abrasive mechanical properties
0 ISO 1993
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l Cl-l-l 211 Geneve 20 l Switzerland
Printed in Switzerland
43 ISO
ISO 11125=6:1993(E)
At the time of publication of this part of ISO 11125, part 8 was in course
of preparation.
Annex A of this part of ISO 11125 is for information only.

This page intentionally left blank

INTERNATIONAL STANDARD Q ISO ISO 11125=6:1993(E)
Preparation of steel Substrates before application of
pa
...