Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)

Erdöl- und Erdgasindustrie - Umhüllungen für erd- und wasserverlegte Rohrleitungen in Transportsystemen - Teil 3: Nachumhüllung der Schweißverbindungen - Änderung 1 (ISO 21809-3:2016/Amd 1:2020)

Industries du pétrole et du gaz naturel - Revêtements externes des conduites enterrées ou immergées utilisées dans les systèmes de transport par conduites - Partie 3: Revêtements des joints soudés sur site - Amendement 1: Introduction de systèmes de revêtement à support maillé (ISO 21809-3:2016/Amd 1:2020)

Naftna industrija in industrija zemeljskega plina - Zunanje prevleke za cevovode, zakopane v zemljo ali potopljene v vodo, v transportnih cevovodnih sistemih - 3. del: Prevleke cevovodnih spojev - Dopolnilo A1: Uvedba z mrežo utrjenih sistemov prevlek (ISO 21809-3:2016/Amd 1:2020)

General Information

Status
Published
Publication Date
30-Jul-2020
Withdrawal Date
30-Oct-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Apr-2020
Completion Date
01-Apr-2020

Relations

Buy Standard

Amendment
EN ISO 21809-3:2016/A1:2020
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Amendment
EN ISO 21809-3:2016/oprA1:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21809-3:2016/A1:2020
01-junij-2020

Naftna industrija in industrija zemeljskega plina - Zunanje prevleke za cevovode,

zakopane v zemljo ali potopljene v vodo, v transportnih cevovodnih sistemih - 3.
del: Prevleke cevovodnih spojev - Dopolnilo A1: Uvedba z mrežo utrjenih sistemov
prevlek (ISO 21809-3:2016/Amd 1:2020)
Petroleum and natural gas industries - External coatings for buried or submerged

pipelines used in pipeline transportation systems - Part 3: Field joint coatings -

Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd
1:2020)

Erdöl- und Erdgasindustrie - Umhüllungen für erd- und wasserverlegte Rohrleitungen in

Transportsystemen - Teil 3: Nachumhüllung der Schweißverbindungen - Berichtigung 1

(ISO 21809-3:2016/Amd 1:2020)

Industries du pétrole et du gaz naturel - Revêtements externes des conduites enterrées

ou immergées utilisées dans les systèmes de transport par conduites - Partie 3:
Revêtements des joints soudés sur site - Amendement 1 (ISO 21809-3:2016/Amd
1:2020)
Ta slovenski standard je istoveten z: EN ISO 21809-3:2016/A1:2020
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
75.200 Oprema za skladiščenje Petroleum products and
nafte, naftnih proizvodov in natural gas handling
zemeljskega plina equipment
SIST EN ISO 21809-3:2016/A1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
EN ISO 21809-3:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 75.200
English Version
Petroleum and natural gas industries - External coatings
for buried or submerged pipelines used in pipeline
transportation systems - Part 3: Field joint coatings -
Amendment 1: Introduction of mesh-backed coating
systems (ISO 21809-3:2016/Amd 1:2020)

Industries du pétrole et du gaz naturel - Revêtements Erdöl- und Erdgasindustrie - Umhüllungen für erd- und

externes des conduites enterrées ou immergées wasserverlegte Rohrleitungen in Transportsystemen -

utilisées dans les systèmes de transport par conduites - Teil 3: Nachumhüllung der Schweißverbindungen -

Partie 3: Revêtements des joints soudés sur site - Änderung 1 (ISO 21809-3:2016/Amd 1:2020)

Amendement 1: Introduction de systèmes de
revêtement à support maillé (ISO 21809-3:2016/Amd
1:2020)

This amendment A1 modifies the European Standard EN ISO 21809-3:2016; it was approved by CEN on 6 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21809-3:2016/A1:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
EN ISO 21809-3:2016/A1:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
EN ISO 21809-3:2016/A1:2020 (E)
European foreword

This document (EN ISO 21809-3:2016/A1:2020) has been prepared by Technical Committee ISO/TC 67

"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries"

in collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and steel fittings”

the secretariat of which is held by UNI.

This Amendment to the European Standard EN ISO 21809-3:2016 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by October 2020,

and conflicting national standards shall be withdrawn at the latest by October 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 21809-3:2016/Amd 1:2020 has been approved by CEN as EN ISO 21809-

3:2016/A1:2020 without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
INTERNATIONAL ISO
STANDARD 21809-3
Second edition
2016-03-01
AMENDMENT 1
2020-03
Petroleum and natural gas
industries — External coatings for
buried or submerged pipelines used
in pipeline transportation systems —
Part 3:
Field joint coatings
AMENDMENT 1: Introduction of mesh-
backed coating systems
Industries du pétrole et du gaz naturel — Revêtements externes
des conduites enterrées ou immergées utilisées dans les systèmes de
transport par conduites —
Partie 3: Revêtements des joints soudés sur site
AMENDEMENT 1: Introduction de systèmes de revêtement à
support maillé
Reference number
ISO 21809-3:2016/Amd.1:2020(E)
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
ISO 21809-3:2016/Amd.1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
ISO 21809-3:2016/Amd.1:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore

structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 2, Pipeline

transportation systems, in collaboration with the European Committee for Standardization (CEN)

Technical Committee CEN/TC 459 ECISS — European Committee for Iron and Steel Standardization,

Subcommittee SC 10, Steel tubes, and iron and steel fittings, in accordance with the Agreement on

technical cooperation between ISO and CEN (Vienna Agreement).
A list of all parts in the ISO 21809 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2020 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
---------------------- Page: 10 ----------------------
SIST EN ISO 21809-3:2016/A1:2020
ISO 21809-3:2016/Amd.1:2020(E)
Petroleum and natural gas industries — External coatings
for buried or submerged pipelines used in pipeline
transportation systems —
Part 3:
Field joint coatings
AMENDMENT 1: Introduction of mesh-backed coating systems
Clause 8, Table 1
Replace the following row:
Clause Code Type of field joint coating
12 12 Cold-applied polymeric tape coatings
with
Clause Code Type of field joint coating
12A Cold-applied tape coatings with
...

SLOVENSKI STANDARD
SIST EN ISO 21809-3:2016/oprA1:2019
01-julij-2019

Naftna industrija in industrija zemeljskega plina - Zunanje prevleke za cevovode,

zakopane v zemljo ali potopljene v vodo, v sistemih cevovodnega transporta - 3.
del: Prevleke spojev - Dopolnilo A1 (ISO 21809-3:2016/DAmd 1:2019)
Petroleum and natural gas industries - External coatings for buried or submerged

pipelines used in pipeline transportation systems - Part 3: Field joint coatings -

Amendment 1 (ISO 21809-3:2016/DAmd 1:2019)

Erdöl- und Erdgasindustrie - Umhüllungen für erd- und wasserverlegte Rohrleitungen in

Transportsystemen - Teil 3: Nachumhüllung der Schweißverbindungen - Berichtigung 1

(ISO 21809-3:2016/DAmd 1:2019)

Industries du pétrole et du gaz naturel - Revêtements externes des conduites enterrées

ou immergées utilisées dans les systèmes de transport par conduites - Partie 3:
Revêtements des joints soudés sur site - Amendement 1 (ISO 21809-3:2016/DAmd
1:2019)
Ta slovenski standard je istoveten z: EN ISO 21809-3:2016/prA1
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
75.200 Oprema za skladiščenje Petroleum products and
nafte, naftnih proizvodov in natural gas handling
zemeljskega plina equipment
SIST EN ISO 21809-3:2016/oprA1:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 21809-3:2016/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 21809-3:2016/oprA1:2019
DRAFT AMENDMENT
ISO 21809-3:2016/DAM 1
ISO/TC 67/SC 2 Secretariat: UNI
Voting begins on: Voting terminates on:
2019-04-22 2019-07-15
Petroleum and natural gas industries — External coatings
for buried or submerged pipelines used in pipeline
transportation systems —
Part 3:
Field joint coatings
AMENDMENT 1: Introduction of mesh-backed coating systems

Industries du pétrole et du gaz naturel — Revêtements externes des conduites enterrées ou immergées

utilisées dans les systèmes de transport par conduites —
Partie 3: Revêtements des joints soudés sur site
AMENDEMENT 1: Introduction de systèmes de revêtement à renforcement maillé
ICS: 75.200
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 21809-3:2016/DAM 1:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
SIST EN ISO 21809-3:2016/oprA1:2019
ISO 21809-3:2016/DAM 1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 21809-3:2016/oprA1:2019
ISO 21809-3:2016/DAM 1:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO’s adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL: www .iso .org/iso/foreword .html.

This document was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore

structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 2, Pipeline

transportation systems.
A list of all parts in the ISO 21809 series can be found on the ISO website.
© ISO 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST EN ISO 21809-3:2016/oprA1:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 21809-3:2016/oprA1:2019
ISO 21809-3:2016/DAM 1:2019(E)
Petroleum and natural gas industries — External coatings
for buried or submerged pipelines used in pipeline
transportation systems —
Part 3:
Field joint coatings
AMENDMENT 1: Introduction of mesh-backed coating systems
Page 12, Clause 8
Modify Table 1 by replacing the following row:
Clause Code Type of field joint coating
12 12 Cold-applied polymeric tape coatings
Clause Code Type of field joint coating
12A Cold-applied tape coatings with a polymeric continuous backing
12B Cold-applied tape coatings with a polymeric mesh backing
Page 26, Clause 12
Replace by the new Clause 12 as follows:
12 Cold-applied polymeric tape coatings
12.1 Coating identification

Cold-applied polymeric tape coatings (FJC Types 12A or 12B) shall be identified in the APS in accordance

with Table 2 and shall meet the requirements of Table 10. Data sheets for the coating materials shall be

in accordance with Table 4 (primer) and Table 5 (tape).

Application instructions shall be provided by the manufacturer in accordance with Table 6.

12.2 Description of the coatings
12.2.1 Cold-applied tape coatings with a polymeric continuous backing (Type 12A)

Cold-applied tape coatings with a polymeric continuous backing consist of several layers of one or more

continuous polymeric tapes, with or without a primer.
This coating type can be further subdivided into the following:
— 12A-1: with a T not greater than 50 °C;
max
— 12A-2: with a T not greater than 80 °C;
max
— 12A-3: with a T not greater than 120 °C.
max

The T shall be stated in brackets, e.g. FJC Type 12A-1(30) or FJC Type 12A-1(50).

max

A T higher than 120 °C can be agreed as long as the requirements of Table 10 are met.

max
© ISO 2019 – All rights reserved 1
---------------------- Page: 7 ----------------------
SIST EN ISO 21809-3:2016/oprA1:2019
ISO 21809-3:2016/DAM 1:2019(E)
12.2.2 Cold-applied tape coatings with a polymeric mesh backing (Type 12B)

Cold-applied tape coatings with a polymeric mesh backing consist of a single layer or multiple layers of

one or more mesh-backed tapes, with or without a primer.

The mesh-backed tape shall be composed of rubber or polymeric based adhesive and a supporting

woven fabric backing.
This coating type can be further subdivided into the following:
— 12B-1: with a T not greater than 50 °C;
max
— 12B-2: with a T not greater than 80 °C;
max

The T shall be stated in brackets, e.g. FJC Type 12B-1(30) or FJC Type 12B-1(50).

max

A T higher than 80 °C can be agreed as long as the requirements of Table 10 are met.

max

The use of any outerwrap is possible if agreed by the manufacturer and the end user. The minimum

requirements in Table 10 do not take into account any outerwrap.
12.3 Surface prepara
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.