EN 14528:2007
(Main)Bidets - Functional requirements and test methods
Bidets - Functional requirements and test methods
This European Standard specifies the functional requirements and test methods for bidets used for domestic purposes and made from either ceramics or stainless steel.
NOTE 1 All drawings are examples only, other forms are permissible.
NOTE 2 For the purposes of this standard the term ‘domestic purposes‘ includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.
Sitzwaschbecken - Funktionsanforderungen und Prüfverfahren
Bidets - Prescriptions fonctionnelles et méthodes d'essai
La présente Norme européenne spécifie les prescriptions fonctionnelles et les méthodes d’essai relatives aux bidets à usage domestique, en céramique ou en acier inoxydable.
NOTE 1 Toutes les figures ne sont que des exemples, d’autres formes sont admises.
NOTE 2 Pour les besoins de la présente norme, le terme « à usage domestique » inclut l’utilisation en hôtel, en logement pour étudiants, en hôpitaux et autres bâtiments similaires, sauf si des précautions médicales particulières s’imposent.
Bideji - Funkcionalne zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bidets - Functional requirements and test methodsBideji - Funkcionalne zahteve in preskusne metodeBidets - Prescriptions fonctionnelles et méthodes d'essaiSitzwaschbecken - Funktionsanforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 14528:2007SIST EN 14528:2007en;fr;de91.140.70Sanitarne napraveSanitary installationsICS:SIST EN 14528:20051DGRPHãþDSLOVENSKI
STANDARDSIST EN 14528:200701-julij-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14528April 2007ICS 91.140.70Supersedes EN 14528:2005
English VersionBidets - Functional requirements and test methodsBidets - Prescriptions fonctionnelles et méthodes d'essaiSitzwaschbecken - Funktionsanforderungen undPrüfverfahrenThis European Standard was approved by CEN on 24 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14528:2007: E
EN 14528:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Requirements.5 4.1 Connecting dimensions.5 4.2 Load stability.5 4.3 Cleanability.5 4.4 Protection against overflowing.5 4.4.1 Bidets with overflow.5 4.4.2 Bidets without overflow.6 4.5 Durability.6 5 Test methods.6 5.1 General.6 5.2 Static load test.6 5.3 Cleanability.8 5.4 Determination of flow rate of overflow.8 6 Marking and product designation.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.