iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15503:2009+A1:2013/FprA2:2015

(Amendment)

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

Requirements for preventing accessibility to the inlet and discharge opening of garden blowers, vacuums and blowers/vacuums - Amendment on accessibility

Gartengeräte - Blasgeräte, Sauggeräte und Blas-/Sauggeräte für den Garten - Sicherheit

Matériel de jardinage - Souffleurs, aspirateurs et aspirateurs-souffleurs de jardin - Sécurité

Oprema za nego vrta - Vrtni pihalniki, vrtni sesalniki in vrtni pihalniki/sesalniki - Varnost - Dopolnilo A2

General Information

Status
Not Published
ICS
65.060.70 - Horticultural equipment
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 7 - Garden equipment
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
06-Oct-2015
Due Date
25-Nov-2015
Completion Date
06-Oct-2015
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 15503:2010+A1:2014/kFprA2:2015 - Garden equipment - Garden blowers, vacuums and blowers/vacuums - Safety

Relations

Merged Into
EN 15503:2009+A2:2015 - Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety
Effective Date
21-Oct-2015
Amends
EN 15503:2009+A1:2013 - Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety
Effective Date
21-Aug-2013
Amends
EN 15503:2009 - Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety
Effective Date
07-Dec-2011

Buy Standard

EN 15503:2010+A1:2014/kFprA2:2015EN 15503:2010+A1:2014/kFprA2:2015
PreviousNext
Draft
EN 15503:2010+A1:2014/kFprA2:2015
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15503:2010+A1:2014/kFprA2:2015
01-oktober-2015
Oprema za nego vrta - Vrtni pihalniki, vrtni sesalniki in vrtni pihalniki/sesalniki -
Varnost - Dopolnilo A2
Garden equipment - Garden blowers, vacuums and blowers/vacuums - Safety
Gartengeräte - Blasgeräte, Sauggeräte und Blas-/Sauggeräte für den Garten - Sicherheit
Matériel de jardinage - Souffleurs, aspirateurs et aspirateurs-souffleurs de jardin -
Sécurité
Ta slovenski standard je istoveten z: EN 15503:2009+A1:2013/FprA2:2015
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN en,fr,de
15503:2010+A1:2014/kFprA2:2015
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 15503:2010+A1:2014/kFprA2:2015

---------------------- Page: 2 ----------------------

SIST EN 15503:2010+A1:2014/kFprA2:2015

EUROPEAN STANDARD
FINAL DRAFT
EN 15503:2009+A1:2013
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA2
August 2015
ICS 65.060.70
English Version
Garden equipment - Garden blowers, vacuums and
blower/vacuums - Safety
Matériel de jardinage - Souffleurs, aspirateurs et Gartengeräte - Blasgeräte, Sauggeräte und Blas-
aspirateurs-souffleurs de jardin - Sécurité /Sauggeräte für den Garten - Sicherheit
This draft amendment is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC 144.

This draft amendment A2, if approved, will modify the European Standard EN 15503:2009+A1:2013. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN
worldwide for CEN national Members. 15503:2009+A1:2013/FprA2:2015:2015 E

---------------------- Page: 3 ----------------------

SIST EN 15503:2010+A1:2014/kFprA2:2015
EN 15503:2009+A1:2013/FprA2:2015
Contents
Page
Foreword . 3
1 Modification to Clause 3 . 4
2 Modifications to 5.2 . 4
3 Addition of a new Annex D . 4
Annex D (normative) Tortuous path test . 5
D.1 Requirements . 5
D.2 Test procedure . 5
D.3 Test acceptance . 7

2

---------------------- Page: 4 ----------------------

SIST EN 15503:2010+A1:2014/kFprA2:2015
EN 15503:2009+A1:2013/FprA2:2015
Foreword
This document (EN 15503:2009+A1:2013/FprA2:2015) has been prepared by Technical Committee
CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by
AFNOR.
This document is currently submitt
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10517:2019(Main)
Powered hand-held hedge trimmers - Safety (ISO 10517:2019)
SIST EN ISO 10517:2019

This document specifies safety requirements and measures for the verification of the design and construction of hand-held, integrally-driven combustion engine hedge trimmers (hereafter referred to as "hedge trimmers") designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades.
This document is also applicable to "split-boom" type hedge trimmers and to multi-purpose machines when configured as a hedge trimmer.
It establishes methods for the elimination or reduction of hazards arising from the use of the hedge trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
This document deals with all significant hazards, hazardous situations and events relevant to powered hand-held hedge trimmers when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Clause 4).
This document is not applicable to hedge trimmers with an engine displacement over 80 cm3, nor is it applicable to hedge trimmers manufactured before the date of its publication.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13684:2018(Main)
Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
SIST EN 13684:2018

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled internal combustion engine powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
Throughout this document, the term "machine" applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes.
It does not apply to:
-   aerators/scarifiers made from a machine falling within the scope of EN 709:1997+A4:2009 when fitted with an aerating/scarifying implement;
-   non-powered aerators;
-   vertical axis aerators; or
-   those aerators which cut into the soil by means of a reciprocating motion or by water pressure.
It deals with all significant hazards, hazardous situations and events relevant to scarifiers and aerators, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Environmental hazards have not been considered in this document.
This document is not applicable to aerators/scarifiers which are manufactured before the date of its publication.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5395-1:2013/A1:2018(Amendment)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration) (ISO 5395-1:2013/Amd 1:2017)
SIST EN ISO 5395-1:2014/A1:2018
  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5395-3:2013/A2:2018(Amendment)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017)
SIST EN ISO 5395-3:2014/A2:2018
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5395-2:2013/A2:2017(Amendment)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 2: Cutting-means-enclosure guards (ISO 5395-2:2013/Amd 2:2017)
SIST EN ISO 5395-2:2014/A2:2017
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5395-3:2013/A1:2017(Amendment)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, pressurized hoses, cutting means, grass catcher and test probe (ISO 5395-3:2013/Amd 1:2017, Corrected version 2017-03)
SIST EN ISO 5395-3:2014/A1:2017
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5395-2:2013/A1:2016(Amendment)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 1: OPC, cutting means, pressurized hoses (ISO 5395-2:2013/Amd 1:2016)
SIST EN ISO 5395-2:2014/A1:2017
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15503:2009+A2:2015(Main)
Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety
SIST EN 15503:2010+A2:2016

This European Standard specifies the safety requirements and their verification for the design and construction of hand-held combustion engine powered and back-pack combustion engine powered, garden vacuums and garden blower/vacuums with or without shredding means and garden blowers, designed for one operator only. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
Throughout this European Standard the term 'machine' is used to mean all the types of garden blowers and vacuums covered by it.
This European Standard deals, except for vibration of backpack machines, with all hazards, hazardous situations and events relevant to these machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This European Standard is not applicable to:
- walk-behind, hand-guided (support-wheeled) and ride-on machines;
- mains driven and battery powered blowers and vacuums of combinations thereof;
NOTE   EN 60335-1 [1] and IEC 60335-2-100 [2] give the safety requirements for mains driven blowers and blower vacuums, vacuum cleaners for household and industrial use.
- structural integrity test for blowers and blower vacuums;
- strength test for harnesses and back-pack supports.
This European Standard is not applicable to machines which are manufactured before the date of its publication a

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5395-1:2013(Main)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013)
SIST EN ISO 5395-1:2014

ISO 5395-1:2013 specifies terminology and common test methods used for verification of safety requirements for combustion engine powered rotary lawnmowers and cylinder lawnmowers including pedestrian-controlled (with or without sulky) and ride-on types (hereafter named "lawnmower"), and equipped with: metallic cutting means and/or; non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.
It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered lawnmowers.
Note that IEC 60335-1 together with IEC 60335-2-77, give requirements for pedestrian-controlled walk-behind electrically powered lawnmowers.
ISO 5395-1:2013 is not applicable to lawnmowers which are manufactured before the date of publication of this document.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5395-3:2013(Main)
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)
SIST EN ISO 5395-3:2014

ISO 5395-3:2013 specifies safety requirements and their verification for combustion-engine-powered ride-on (seated) rotary lawnmowers and cylinder lawnmowers (hereafter named "lawnmower"), and equipped with: metallic cutting means; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.
It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered lawnmowers.
ISO 5395-3:2013 deals with all significant hazards, hazardous situations or events relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
It is not applicable to lawnmowers which are manufactured before the date of publication of this document.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day