Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads

This document specifies the characteristics of flanged bushes in aluminium alloy with self lubricating liner and the design recommendation of shafts and housings.
The bushes are intended for operation within the temperature range of −55 °C to 121 °C and assembly with an interference fit into fixed and moving aerospace parts.

Luft- und Raumfahrt - Buchsen mit Flansch aus Aluminium-Legierung mit selbstschmierender Beschichtung - Maße und Belastungen

Diese Europäische Norm legt die Eigenschaften von Buchsen mit Flansch aus Aluminiumlegierung mit selbst¬schmierender Beschichtung sowie Konstruktionsempfehlungen für Welle und Aufnahmebohrung fest.
Die Buchsen sind für den Einsatz im Temperaturbereich von −55 °C bis 121 °C und den Einbau mit Presspassung in starre oder bewegliche Teile von Luft- und Raumfahrzeugen bestimmt.

Série aérospatiale - Bagues à épaulement en alliage d’aluminium, à garniture autolubrifiante - Dimensions et charges

Aeronavtika - Drsne puše s prirobnico iz aluminijeve zlitine s samomazalno oblogo - Mere in nosilnosti

Ta dokument določa lastnosti drsnih puš s prirobnico iz aluminijeve zlitine s samomazalno oblogo ter priporočilo za projektiranje gredi in ohišij.
Puše so predvidene za uporabo v temperaturnem območju od –55 °C do 121 °C in sestavu z nateznim spojem v fiksnih in gibljivih delih aeronavtičnih vozil.

General Information

Status
Published
Publication Date
02-May-2017
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
03-May-2017
Completion Date
03-May-2017

RELATIONS

Buy Standard

Standard
EN 2286:2017
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 2286:2017
01-julij-2017
1DGRPHãþD
SIST EN 2286:2001

Aeronavtika - Drsne puše s prirobnico iz aluminijeve zlitine s samomazalno oblogo

- Mere in nosilnosti

Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner -

Dimensions and loads
Luft- und Raumfahrt - Buchsen mit Flansch aus Aluminium-Legierung mit
selbstschmierender Beschichtung - Maße und Belastungen
6pULHDpURVSDWLDOH%DJXHVjpSDXOHPHQWHQDOOLDJHGDOXPLQLXPjJDUQLWXUH
DXWROXEULILDQWH'LPHQVLRQVHWFKDUJHV
Ta slovenski standard je istoveten z: EN 2286:2017
ICS:
49.025.20 Aluminij Aluminium
49.030.99 Drugi vezni elementi Other fasteners
SIST EN 2286:2017 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2286:2017
---------------------- Page: 2 ----------------------
SIST EN 2286:2017
EN 2286
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2017
EUROPÄISCHE NORM
ICS 49.030.99 Supersedes EN 2286:1989
English Version
Aerospace series - Bushes, flanged aluminium alloy, with
self-lubricating liner - Dimensions and loads

Série aérospatiale - Bagues à épaulement en alliage Luft- und Raumfahrt - Buchsen mit Flansch aus

d'aluminium, à garniture autolubrifiante - Dimensions Aluminium-Legierung mit selbstschmierender

et charges Beschichtung - Maße und Belastungen
This European Standard was approved by CEN on 2 January 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2286:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2286:2017
EN 2286:2017 (E)
Contents Page

European foreword ................................................................................................................................................................. 3

1 Scope ............................................................................................................................................................................. 4

2 Normative references ............................................................................................................................................. 4

3 Required characteristics ....................................................................................................................................... 4

3.1 Configuration — Dimensions — Masses .......................................................................................................... 4

3.2 Surface roughness .................................................................................................................................................... 4

3.3 Materials ...................................................................................................................................................................... 4

3.4 Surface treatment ..................................................................................................................................................... 5

4 Designation ................................................................................................................................................................. 8

5 Marking ........................................................................................................................................................................ 8

6 Technical specification ........................................................................................................................................... 8

7 Design recommendation ........................................................................................................................................ 8

(informative) Standard evolution form ..................................................................................................... 10

---------------------- Page: 4 ----------------------
SIST EN 2286:2017
EN 2286:2017 (E)
European foreword

This document (EN 2286:2017) has been prepared by the Aerospace and Defence Industries Association of

Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this European

Standard has received the approval of the National Associations and the Official Services of the member

countries of ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by November 2017, and conflicting national standards shall be

withdrawn at the latest by November 2017.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 2286:1989.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

---------------------- Page: 5 ----------------------
SIST EN 2286:2017
EN 2286:2017 (E)
1 Scope

This document specifies the characteristics of flanged bushes in aluminium alloy with self-lubricating liner

and the design recommendation of shafts and housings.

The bushes are intended for operation within the temperature range of −55 °C to 121 °C and assembly with

an interference fit into fixed and moving aerospace parts.
2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated references,

the latest edition of the referenced document (including any amendments) applies.

EN 2086, Aerospace series — Aluminium alloy AL-P2618A — T851 — Hand and die forgings — a ≤ 150 mm

EN 2101, Aerospace series — Chromic acid anodizing of aluminium and wrought aluminium alloys

EN 2284, Aerospace series — Sulphuric acid anodizing of aluminium and wrought aluminium alloys

EN 2311, Aerospace series — Bushes with self-lubricating liner — Technical specification

EN 2701, Aerospace series — Aluminium alloy (2024) — Solution treated, w
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.