EN 62631-3-2:2016
(Main)Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
IEC 62631-3-2:2015 covers methods of test for the determination of surface resistance and surface resistivity of electrical insulation materials by applying DC voltage. This first edition cancels and replaces the second edition of IEC 60093, published in 1980, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the second edition of IEC 60093: a) IEC 60093 has been completely revised, both editorially and technically, and incorporated into the new IEC 62631 series; b) test methods have been updated to current day state of the art; c) volume and surface resistance and resistivity are now separated into IEC 62631-3-1 and IEC 62631-3-2, respectively.
Dielektrische und resistive Eigenschaften fester Isolierstoffe - Teil 3-2: Bestimmung resistiver Eigenschaften (Gleichspannungsverfahren) - Oberflächenwiderstand und spezifischer Oberflächenwiderstand
Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-2: Détermination des propriétés résistives (Méthodes en courant continu) - Résistance superficielle et résistivité superficielle
L'IEC 62631-3-2:2015 couvre des méthodes d'essai pour déterminer la résistance superficielle et la résistivité superficielle de matériaux isolants électriques en appliquant une tension continue. Cette première édition annule et remplace la deuxième édition de l'IEC 60093 parue en 1980 dont elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à la deuxième édition de l'IEC 60093: a) l'IEC 60093 a été entièrement révisée tant au plan rédactionnel que technique et insérée dans la nouvelle série IEC 62631; b) les méthodes d'essai ont été adaptées à l'état actuel de la technique; c) les résistances et les résistivités transversales et superficielles sont maintenant séparées et font l'objet de deux parties, l'IEC 62631-3-1 et l'IEC 62631-3-2, respectivement.
Dielektrične in uporovne lastnosti trdnih izolacijskih materialov - 3-2. del: Ugotavljanje uporovnih lastnosti (metode z enosmernim tokom) - Površinska upornost in površinska specifična upornost (IEC 62631-3-2:2015)
Ta del standarda IEC 62631 obravnava preskusne metode za ugotavljanje površinske upornosti in površinske specifične upornosti elektroizolacijskih materialov z uporabo enosmernega toka.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2016
'LHOHNWULþQHLQXSRURYQHODVWQRVWLWUGQLKL]RODFLMVNLKPDWHULDORYGHO
8JRWDYOMDQMHXSRURYQLKODVWQRVWL PHWRGH]HQRVPHUQLPWRNRP 3RYUãLQVND
XSRUQRVWLQSRYUãLQVNDVSHFLILþQDXSRUQRVW ,(&
Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of
resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631
-3-2:2015)
Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-2:
Détermination des propriétés résistives (Méthodes en courant continu) - Résistance
superficielle et résistivité superficielle
Ta slovenski standard je istoveten z: EN 62631-3-2:2016
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62631-3-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2016
ICS 17.220.99; 29.035.01
English Version
Dielectric and resistive properties of solid insulating materials -
Part 3-2: Determination of resistive properties (DC Methods) -
Surface resistance and surface resistivity
(IEC 62631-3-2:2015)
Propriétés diélectriques et résistives des matériaux isolants Dielektrische und resistive Eigenschaften fester Isolierstoffe
solides - Partie 3-2: Détermination des propriétés résistives - Teil 3-2: Bestimmung von Widerstandseigenschaften
(Méthodes en courant continu) - Résistance superficielle et (Gleichstromverfahren) - Oberflächenwiderstand und
résistivité superficielle spezifischer Oberflächenwiderstand
(IEC 62631-3-2:2015) (IEC 62631-3-2:2015)
This European Standard was approved by CENELEC on 2016-01-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62631-3-2:2016 E
European foreword
The text of document 112/340/FDIS, future edition 1 of IEC 62631-3-2, prepared by IEC/TC 112
"Evaluation and qualification of electrical insulating materials and systems" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62631-3-2:2016.
The following dates are fixed:
(dop) 2016-10-08
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-01-08
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62631-3-2:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60893-2 NOTE Harmonized as EN 60893-2.
IEC 61212-2 NOTE Harmonized as EN 61212-2.
IEC 62011-2 NOTE Harmonized as EN 62011-2.
ISO 10350 (Series) NOTE Harmonized as EN ISO 10350 (Series).
ISO 10350-1 NOTE Harmonized as EN ISO 10350-1.
ISO 10350-2 NOTE Harmonized as EN ISO 10350-2.
ISO 14526 (Series) NOTE Harmonized as EN ISO 14526 (Series).
ISO 14527 (Series) NOTE Harmonized as EN ISO 14527 (Series).
ISO 14528 (Series) NOTE Harmonized as EN ISO 14528 (Series).
ISO 14529 (Series) NOTE Harmonized as EN ISO 14529 (Series).
ISO 14530 (Series) NOTE Harmonized as EN ISO 14530 (Series).
ISO 15252 (Series) NOTE Harmonized as EN ISO 15252 (Series).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60212 - Standard conditions for use prior to and EN 60212 -
during the testing of solid electrical
insulating materials
IEC 62631-3-1 - Dielectric and resistive properties of solid - -
insulating materials - Part 3-1
Determination of resistive properties (DC
Methods) - Volume resistance and volume
resistivity, general method
IEC 62631-3-3 - Dielectric and resistive properties of solid EN 62631-3-3 -
insulating materials - Part 3-1
Determination of resistive properties (DC
Methods) - Volume resistance and volume
resistivity, general method
IEC 62631-3-2 ®
Edition 1.0 2015-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dielectric and resistive properties of solid insulating materials –
Part 3-2: Determination of resistive properties (DC methods) – Surface
resistance and surface resistivity
Propriétés diélectriques et résistives des matériaux isolants solides –
Partie 3-2: Détermination des propriétés résistives (méthodes en courant
continu) – Résistance superficielle et résistivité superficielle
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.220.99; 29.035.01 ISBN 978-2-8322-3025-1
– 2 – IEC 62631-3-2:2015 IEC:2015
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Significance . 7
5 Method of test . 7
5.1 General . 7
5.2 Voltage . 8
5.3 Equipment . 8
5.3.1 General . 8
5.3.2 Accuracy . 8
5.3.3 Voltage source . 8
5.3.4 Electrode arrangement A – Spring loaded electrodes . 8
5.3.5 Electrode arrangement B – Small line electrodes . 9
5.3.6 Electrode arrangement C – Annular electrodes . 10
5.3.7 Electrode arrangement D – Line electrodes . 11
5.3.8 Electrode arrangement E – Line electrodes for small plates . 11
5.4 Test circuit . 11
5.5 Calibration . 12
5.6 Test specimen . 12
5.6.1 Recommended dimensions of test specimen and electrode
arrangements . 12
5.6.2 Manufacturing of test specimen . 12
5.6.3 Number of test specimen . 13
5.6.4 Application of electrodes. 13
5.6.5 Conditioning and pre-treatment of test specimen . 13
5.7 Test procedure . 13
6 Evaluation . 13
6.1 For electrode arrangements A, B, D, and E . 13
6.2 For electrode arrangement C . 14
7 Test report . 14
8 Repeatability and reproducibility . 15
Annex A (informative) Specimen dimensions and electrode arrangement . 16
Bibliography . 17
Figure 1 – Electrode arrangement A (example) . 9
Figure 2 – Collector electrode for electrode arrangement B. 10
Figure 3 – Electrode arrangement C . 10
Figure 4 – Connection diagram of measurement with two- and three-terminal electrode
arrangements. 12
Table 1 – Typical electrode dimensions for electrode arrangement C . 11
Table A.1 – Recommended test specimen dimensions and electrode arrangements for
specific products . 16
IEC 62631-3-2:2015 IEC:2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIELECTRIC AND RESISTIVE PROPERTIES
OF SOLID INSULATING MATERIALS –
Part 3-2: Determination of resistive properties (DC methods) –
Surface resistance and surface resistivity
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.