EN IEC 62631-3-1:2023

Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method

This part of IEC 62631 covers a method of test for the determination of volume resistance and volume resistivity of electrical insulating materials by applying a DC voltage.

Dielektrische und resistive Eigenschaften fester Isolierstoffe - Teil 3-1: Bestimmung resistiver Eigenschaften (Gleichspannungsverfahren) - Durchgangswiderstand und spezifischer Durchgangswiderstand - Basisverfahren

Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-1: Détermination des propriétés résistives (méthodes en courant continu) - Résistance volumique et résistivité volumique - Méthode générale

IEC 62631-3-1:2023 est disponible sous forme de IEC 62631-3-1:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62631-3-1:2023 spécifie une méthode d'essai pour déterminer la résistance volumique et la résistivité volumique de matériaux isolants électriques par application d'une tension continue. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - à la suite du retrait de l'IEC 60093 et à son remplacement partiel par la première édition de l’IEC 62631-3-1, des éléments rédactionnels et techniques manquants ont été ajoutés et intégrés dans la seconde édition de l’IEC 62631-3-1; - un alignement des textes normatifs et des notes informatives a été réalisé ainsi qu’une mise à jour des références normatives et de la bibliographie.

Dielektrične in uporovne lastnosti trdnih izolacijskih materialov - 3-1. del: Ugotavljanje uporovnih lastnosti (metode z enosmernim tokom) - Prehodna upornost in specifična prehodna upornost - Splošna metoda (IEC 62631-3-1:2023)

Ta del standarda IEC 62631 obravnava preskusno metodo za ugotavljanje prehodne upornosti in specifične prehodne upornosti elektroizolacijskih materialov z uporabo enosmernega toka.

General Information

• Status: Published
• Publication Date: 02-Mar-2023
• ICS: 17.220.99 - Other standards related to electricity and magnetism
• ICS: 29.035.01 - Insulating materials in general
• Technical Committee: CLC/SR 112 - Evaluation and qualification of electrical insulating materials and systems (to be defined)
• Drafting Committee: IEC/TC 112 - IEC_TC_112
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-Mar-2023
• Completion Date: 03-Mar-2023
• Ref Project: SIST EN IEC 62631-3-1:2023 - Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (IEC 62631-3-1:2023)

Relations

• Replaces: EN 62631-3-1:2016 - Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
• Effective Date: 24-Sep-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2023
Dielektrične in uporovne lastnosti trdnih izolacijskih materialov - 3-1. del:
Ugotavljanje uporovnih lastnosti (metode z enosmernim tokom) - Prehodna
upornost in specifična prehodna upornost - Splošna metoda (IEC 62631-3-1:2023)
Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of
resistive properties (DC methods) - Volume resistance and volume resistivity - General
method (IEC 62631-3-1:2023)
Dielektrische und resistive Eigenschaften fester Isolierstoffe - Teil 3-1: Bestimmung
resistiver Eigenschaften (Gleichspannungsverfahren) - Durchgangswiderstand und
spezifischer Durchgangswiderstand, Basisverfahren (IEC 62631-3-1:2023)
Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-1:
Détermination des propriétés résistives (méthodes en courant continu) - Résistance
transversale et résistivité transversale - Méthode générale (IEC 62631-3-1:2023)
Ta slovenski standard je istoveten z: EN IEC 62631-3-1:2023
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62631-3-1

NORME EUROPÉENNE
EUROPÄISCHE NORM March 2023
ICS 17.220.99; 29.035.01 Supersedes EN 62631-3-1:2016
English Version
Dielectric and resistive properties of solid insulating materials -
Part 3-1: Determination of resistive properties (DC methods) -
Volume resistance and volume resistivity - General method
(IEC 62631-3-1:2023)
Propriétés diélectriques et résistives des matériaux isolants Dielektrische und resistive Eigenschaften fester Isolierstoffe
solides - Partie 3-1: Détermination des propriétés résistives - Teil 3-1: Bestimmung resistiver Eigenschaften
(méthodes en courant continu) - Résistance volumique et (Gleichspannungsverfahren) - Durchgangswiderstand und
résistivité volumique - Méthode générale spezifischer Durchgangswiderstand - Basisverfahren
(IEC 62631-3-1:2023) (IEC 62631-3-1:2023)
This European Standard was approved by CENELEC on 2023-02-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62631-3-1:2023 E

European foreword
The text of document 112/597/FDIS, future edition 2 of IEC 62631-3-1, prepared by IEC/TC 112
"Evaluation and qualification of electrical insulating materials and systems" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62631-3-1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-11-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-02-27
document have to be withdrawn
This document supersedes EN 62631-3-1:2016 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62631-3-1:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62631-3-11 NOTE Approved as EN IEC 62631-3-11
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60212 - Standard conditions for use prior to and EN 60212 -
during the testing of solid electrical
insulating materials
IEC 60455-2 - Resin based reactive compounds used for EN 60455-2 -
electrical insulation - Part 2: Methods of
test
IEC 60464-2 - Varnishes used for electrical insulation - EN 60464-2 -
Part 2: Methods of test
IEC 61212-2 - Insulating materials - Industrial rigid round EN 61212-2 -
laminated tubes and rods based on
thermosetting resins for electrical purposes
- Part 2: Methods of test
IEC 62631-3-1 ®
Edition 2.0 2023-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dielectric and resistive properties of solid insulating materials –

Part 3-1: Determination of resistive properties (DC methods) – Volume

resistance and volume resistivity – General method

Propriétés diélectriques et résistives des matériaux isolants solides –

Partie 3-1: Détermination des propriétés résistives (méthodes en courant

continu) – Résistance volumique et résistivité volumique – Méthode générale

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.220.99; 29.035.01 ISBN 978-2-8322-6359-4

– 2 – IEC 62631-3-1:2023 © IEC 2023
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Significance . 6
4.1 General . 6
4.2 Power supply and voltage . 6
4.3 Equipment . 7
4.3.1 Accuracy . 7
4.3.2 Guarding . 7
4.3.3 Electrodes . 9
4.4 Calibration . 11
4.5 Test specimen . 11
4.5.1 General . 11
4.5.2 Manufacturing of test specimens. 11
4.5.3 Number of test specimens . 11
4.5.4 Conditioning and pre-treatment of test specimens . 11
4.6 Procedures for specific materials . 12
5 Test procedure . 12
5.1 General . 12
5.2 Measurement of volume resistance . 12
5.3 Calculation of volume resistivity . 12
6 Test report . 12
7 Repeatability and reproducibility . 13
Bibliography . 14

Figure 1 – Basic connection for guarded electrodes . 8
Figure 2 – Electrode arrangement . 8
Figure 3 – Specimen with liquid electrodes . 10

Table 1 – Typical electrode dimensions for electrode arrangement (examples) . 9

IEC 62631-3-1:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIELECTRIC AND RESISTIVE PROPERTIES
OF SOLID INSULATING MATERIALS –

Part 3-1: Determination of resistive properties (DC methods) –
Volume resistance and volume resistivity – General method

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication
...