EN IEC 62631-3-12:2024
(Main)Dielectric and resistive properties of solid insulating materials - Part 3-12: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for casting resins
Dielectric and resistive properties of solid insulating materials - Part 3-12: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for casting resins
IEC 62631-3-12:2024 specifies a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying a DC voltage. It covers casting resins described in IEC 60455-3-1, IEC 60455-3-2, IEC 60455-3-3, IEC 60455-3-4, IEC 60455-3-8 and similar products. For other specific types of materials, other standards or the general method described in IEC 62631-3-1 can be more suitable.
Dielektrische und resistive Eigenschaften fester Elektroisolierstoffe - Teil 3-12: Bestimmung der resistiven Eigenschaften (Gleichstromverfahren) - Volumenwiderstand und Durchgangswiderstand, Verfahren für Gießharze
Propriétés diélectriques et résistives des matériaux isolant solides - Partie 3-12: Détermination des propriétés résistives (méthodes en courant continu) - Résistance volumique et résistivité volumique - Méthode pour résines de coulée
L’IEC 62631-3-12:2024 spécifie la méthode d'essai pour la détermination de la résistance volumique et de la résistivité volumique des matériaux isolants électriques par l'application d'une tension continue. Elle couvre les résines de coulée décrites dans l’IEC 60455-3-1, l’IEC 60455-3-2, l’IEC 60455-3-3, l’IEC 60455-3-4, l’IEC 60455-3-8 et les produits analogues. Pour d'autres types de matériaux spécifiques, d'autres normes ou la méthode générale décrite dans l’IEC 62631-3-1 peuvent être plus appropriées.
Dielektrične in uporovne lastnosti trdnih izolacijskih materialov - 3-12. del: Ugotavljanje uporovnih lastnosti (metode z enosmernim tokom) - Prehodna upornost in specifična prehodna upornost, metoda za ulivanje smol (IEC 62631-3-12:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Dielektrične in uporovne lastnosti trdnih izolacijskih materialov - 3-12. del:
Ugotavljanje uporovnih lastnosti (metode z enosmernim tokom) - Prehodna
upornost in specifična prehodna upornost, metoda za ulivanje smol (IEC 62631-3-
12:2024)
Dielectric and resistive properties of solid insulating materials - Part 3-12: Determination
of resistive properties (DC Methods) - Volume resistance and volume resistivity, method
for casting resins (IEC 62631-3-12:2024)
Dielektrische und resistive Eigenschaften fester Elektroisolierstoffe - Teil 3-12:
Bestimmung der resistiven Eigenschaften (Gleichstromverfahren) - Volumenwiderstand
und Durchgangswiderstand, Verfahren für Gießharze (IEC 62631-3-12:2024)
Propriétés diélectriques et résistives des matériaux isolant solides - Partie 3-12:
Détermination des propriétés résistives (méthodes en courant continu) - Résistance
volumique et résistivité volumique, méthode pour résines de coulée (IEC 62631-3-
12:2024)
Ta slovenski standard je istoveten z: EN IEC 62631-3-12:2024
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62631-3-12
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 17.220.99; 29.035.01
English Version
Dielectric and resistive properties of solid insulating materials -
Part 3-12: Determination of resistive properties (DC methods) -
Volume resistance and volume resistivity - Method for casting
resins
(IEC 62631-3-12:2024)
Propriétés diélectriques et résistives des matériaux isolant Dielektrische und resistive Eigenschaften fester
solides - Partie 3-12: Détermination des propriétés Elektroisolierstoffe - Teil 3-12: Bestimmung der resistiven
résistives (méthodes en courant continu) - Résistance Eigenschaften (Gleichstromverfahren) - Volumenwiderstand
volumique et résistivité volumique - Méthode pour résines und Durchgangswiderstand, Verfahren für Gießharze
de coulée (IEC 62631-3-12:2024)
(IEC 62631-3-12:2024)
This European Standard was approved by CENELEC on 2024-08-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62631-3-12:2024 E
European foreword
The text of document 112/645/FDIS, future edition 1 of IEC 62631-3-12, prepared by IEC/TC 112
"Evaluation and qualification of electrical insulating materials and systems" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62631-3-12:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-05-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-08-09
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62631-3-12:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60455-3-1 NOTE Approved as EN 60455-3-1
IEC 60455-3-2 NOTE Approved as EN 60455-3-2
IEC 60455-3-3 NOTE Approved as EN 60455-3-3
IEC 60455-3-4 NOTE Approved as EN 60455-3-4
IEC 60455-3-8 NOTE Approved as EN IEC 60455-3-8
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 62631-3-1 - Dielectric and resistive properties of solid EN IEC 62631-3-1 -
insulating materials - Part 3-1:
Determination of resistive properties (DC
methods) - Volume resistance and volume
resistivity - General method
ISO 2808 - Paints and varnishes - Determination of EN ISO 2808 -
film thickness
IEC 62631-3-12 ®
Edition 1.0 2024-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dielectric and resistive properties of solid insulating materials –
Part 3-12: Determination of resistive properties (DC methods) – Volume
resistance and volume resistivity – Method for casting resins
Propriétés diélectriques et résistives des matériaux isolant solides –
Partie 3-12: Détermination des propriétés résistives (méthodes en courant
continu) – Résistance volumique et résistivité volumique – Méthode pour
résines de coulée
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.220.99, 29.035.01 ISBN 978-2-8322-9299-0
– 2 – IEC 62631-3-12:2024 © IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Significance . 7
5 Method of test . 7
5.1 General . 7
5.2 Power supply and voltage . 7
5.3 Equipment . 8
5.3.1 Accuracy . 8
5.3.2 Guarding . 8
5.3.3 Electrodes . 8
5.3.4 Calibration . 8
5.4 Test specimen . 8
5.5 Procedure for volume resistivity as function of temperature . 8
5.5.1 General . 8
5.5.2 Equipment . 9
5.5.3 Test set-up . 9
5.5.4 Procedure . 9
5.5.5 Calculation . 9
5.6 Procedure for volume resistivity after seven days of immersion into water . 9
5.6.1 General . 9
5.6.2 Equipment . 10
5.6.3 Test set-up . 10
5.6.4 Procedure . 10
5.6.5 Calculation . 10
6 Report . 10
7 Repeatability and reproducibility . 11
Bibliography . 12
IEC 62631-3-12:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIELECTRIC AND RESISTIVE PROPERTIES
OF SOLID INSULATING MATERIALS –
Part 3-12: Determination of resistive properties (DC methods) –
Volume resistance and volume resistivity – Method for casting resins
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other da
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.