EN 60062:2016

Marking codes for resistors and capacitors

Specifies marking codes for resistors and capacitors and indexes for the dielectric material and the electrodes of plastic film and paper capacitors

Kennzeichnung von Widerständen und Kondensatoren

Codes de marquage des résistances et des condensateurs

L'IEC 60062:2016 spécifie des codes de désignation et de marquage pour les condensateurs et les résistances. Elle fournit des méthodes de codage pour les valeurs de résistance et de capacité et leurs tolérances, y compris le codage par couleurs des résistances. Elle fournit également des systèmes de code de date pour le marquage de petits composants. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - introduction de la nouvelle couleur de codage rose pour le facteur multiplicateur 10-3; - introduction de nouveaux paragraphes: 3.2 Prescription de couleurs de codage, 3.3 Méthodes de marquage de la valeur d'une résistance et de la tolérance, 3.4 Méthodes de marquage du coefficient de température de résistance. Pour plus de clarté, l'attribution des couleurs, le codage de la valeur d'une résistance et de la tolérance et le codage du coefficient de température de résistance sont traités dans des articles distincts; - ajout d'illustrations sur le marquage du coefficient de température de résistance par une bande de couleur interrompue; - ajout d'un nouveau paragraphe sur un marquage de code de longueur fixe, un marquage de code de longueur fixe des valeurs de résistance comportant jusqu'à 3 chiffres significatifs, donc un code de longueur fixe de 4 chiffres et un marquage de code de longueur fixe des valeurs de capacité comportant jusqu'à 2 chiffres significatifs, donc un code de longueur fixe de 3 chiffres; - introduction de deux articles, l'Article 6, Codage des propriétés spécifiques aux condensateurs et l'Article 7, Codage des propriétés spécifiques aux résistances; - introduction de l'Annexe A, Codage spécial à trois caractères de la valeur d'une résistance avec trois chiffres significatifs.

Označevalne kode za upore in kondenzatorje (IEC 60062:2016)

Določa označevalne kode za upore in kondenzatorje ter indekse za dielektrične materiale in elektrode plastičnih filmskih in papirnih kondenzatorjev.

General Information

• Status: Published
• Publication Date: 20-Oct-2016
• Withdrawal Date: 15-Aug-2019
• ICS: 31.020 - Electronic components in general
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 21-Oct-2016
• Completion Date: 21-Oct-2016
• Ref Project: SIST EN 60062:2016 - Marking codes for resistors and capacitors (IEC 60062:2016)

Relations

• Replaces: EN 60062:2005 - Marking codes for resistors and capacitors
• Effective Date: 25-Jan-2023
• Amended By: EN 60062:2016/A1:2019 - Marking codes for resistors and capacitors
• Effective Date: 17-Jul-2018
• Corrected By: EN 60062:2016/AC:2016-12 - Marking codes for resistors and capacitors
• Effective Date: 13-Dec-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60062:2016
01-december-2016
1DGRPHãþD
SIST EN 60062:2005
2]QDþHYDOQHNRGH]DXSRUHLQNRQGHQ]DWRUMH,(&
Marking codes for resistors and capacitors (IEC 60062:2016)
Ta slovenski standard je istoveten z: EN 60062:2016
ICS:
31.040.01 Upori splošno Resistors in general
31.060.01 Kondenzatorji na splošno Capacitors in general
SIST EN 60062:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60062:2016

---------------------- Page: 2 ----------------------

SIST EN 60062:2016


EUROPEAN STANDARD EN 60062

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2016
ICS 31.020 Supersedes EN 60062:2005
English Version
Marking codes for resistors and capacitors
(IEC 60062:2016)
Codes de marquage des résistances et des condensateurs Kennzeichnung von Widerständen und Kondensatoren
(IEC 60062:2016) (IEC 60062:2016)
This European Standard was approved by CENELEC on 2016-08-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60062:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60062:2016
EN 60062:2016
European foreword
The text of document 40/2465/FDIS, future edition 6 of IEC 60062, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60062:2016.
The following dates are fixed:
(dop) 2017-05-16
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-08-16
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 60062:2005.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60062:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
ISO 1043-1 NOTE Harmonized as EN ISO 1043-1.
2

---------------------- Page: 4 ----------------------

SIST EN 60062:2016
EN 60062:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60063 -  Preferred number series for resistors and EN 60063 -
capacitors
IEC 60757 -  Code for designation of colours HD 457 S1 -
ISO 8601 -  Data elements and interchange formats - - -
Information interchange - Representation
of dates and times

3

---------------------- Page: 5 ----------------------

SIST EN 60062:2016

---------------------- Page: 6 --------------
...