EN 50173-6:2018

Information technology - Generic cabling systems - Part 6: Distributed building services

This standard specifies generic cabling for distributed building services and can be used in conjunction with all the space-specific standards of the EN 50173 series. It covers balanced cabling and optical fibre cabling. This standard specifies directly or via reference to EN 50173 1 the: - structure and minimum configuration for generic cabling for distributed building services; - interfaces at the service outlet (SO); - performance requirements for cabling links and channels; - implementation requirements and options; - performance requirements for cabling components; - conformance requirements and verification procedures. This standard has taken into account requirements specified in application standards listed in EN 50173 1. Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this standard and are covered by other standards and regulations. However, information given in this standard can be of assistance in meeting these standards and regulations.

Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 6: Verteilte Gebäudedienste

Diese Norm legt anwendungsneutrale Kommunikationskabelanlagen für verteilte Gebäudedienste fest und kann gemeinsam mit allen bereichsspezifischen Normen der Reihe EN 50173 verwendet werden. Sie behandelt symmetrische Kupferverkabelung und Lichtwellenleiterverkabelung. Diese Norm legt entweder direkt oder mittels Verweisung auf EN 50173 1 Folgendes fest: – Struktur und Mindestkonfiguration für anwendungsneutrale Kommunikationskabelanlagen für verteilte Gebäudedienste; – Schnittstellen am Diensteanschluss (DA); – Anforderungen an das Leistungsvermögen von Verkabelungs- und Übertragungsstrecken; – Anforderungen an und Optionen für Ausführungen; – Anforderungen an das Leistungsvermögen von Verkabelungskomponenten; – Konformitätsanforderungen und Verifizierungsverfahren. In dieser Norm wurden Anforderungen berücksichtigt, die in den in EN 50173 1 aufgeführten Anwendungs-normen festgelegt werden. Anforderungen an Sicherheit und elektromagnetische Verträglichkeit (EMV) gehören nicht zum Anwendungs-bereich dieser Norm und werden von anderen Normen und Vorschriften behandelt. Jedoch können die in dieser Norm bereitgestellten Informationen bei der Einhaltung dieser Normen und Vorschriften hilfreich sein.

Technologies de l’information - Systèmes de câblage générique - Partie 6 : Services distribués dans les bâtiments

Informacijska tehnologija - Univerzalni sistemi polaganja kablov - 6. del: Porazdeljene storitve v stavbah

Ta standard določa univerzalne kable za porazdeljene storitve v stavbah in ga je mogoče uporabljati skupaj z vsemi standardi iz skupine standardov EN 50173, ki obravnavajo določene prostore.
Zajema simetrične kable in kable z optičnimi vlakni.
Ta standard neposredno ali s sklicem na standard EN 50173 1 določa:
– strukturo in minimalno konfiguracijo univerzalnih kablov za porazdeljene storitve v stavbah;
– vmesnike na servisni vtičnici (SO);
– zahteve za zmogljivost kabelskih povezav in kanalov;
– zahteve in možnosti za izvedbo;
– zahteve za zmogljivost kabelskih komponent;
– zahteve za skladnost in postopke preverjanja.
Ta standard upošteva zahteve, določene v standardih za uporabo, navedenih v standardu EN 50173 1.
Varnostne zahteve in zahteve za elektromagnetno združljivost (EMC) ne spadajo na področje uporabe tega standarda ter so obravnavane v drugih standardih in predpisih. Vendar so lahko informacije iz tega standarda v pomoč pri izpolnjevanju teh standardov in predpisov.

General Information

• Status: Published
• Publication Date: 14-Jun-2018
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 215 - Electrotechnical aspects of telecommunication equipment
• Drafting Committee: CLC/TC 215 - Electrotechnical aspects of telecommunication equipment
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 09-Nov-2022
• Ref Project: SIST EN 50173-6:2018 - Information technology - Generic cabling systems - Part 6: Distributed building services

Relations

• Replaces: EN 50173-6:2013 - Information technology - Generic cabling systems - Part 6: Distributed building services
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2018
1DGRPHãþD
SIST EN 50173-6:2013
Informacijska tehnologija - Univerzalni sistemi polaganja kablov - 6. del:
Porazdeljene storitve v stavbah
Information technology - Generic cabling systems - Part 6: Distributed building services
Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 6:
Verteilte Gebäudedienste
Technologies de l’information - Systèmes de câblage générique - Partie 6 : Services
distribués dans les bâtiments
Ta slovenski standard je istoveten z: EN 50173-6:2018
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50173-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 35.110 Supersedes EN 50173-6:2013
English Version
Information technology - Generic cabling systems - Part 6:
Distributed building services
Technologies de l'information - Systèmes de câblage Informationstechnik - Anwendungsneutrale
générique - Partie 6 : Services distribués dans les Kommunikationskabelanlagen - Teil 6: Verteilte
bâtiments Gebäudedienste
This European Standard was approved by CENELEC on 2018-03-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50173-6:2018 E
Contents Page
European foreword . 6
Introduction . 7
1 Scope and conformance . 10
1.1 Scope .10
1.2 Conformance .10
2 Normative references . 11
3 Terms, definitions and abbreviations . 11
3.1 Terms and definitions .11
3.2 Abbreviations .12
4 Structure of the generic cabling for distributed building services . 12
4.1 General .12
4.2 Functional elements .13
4.2.1 Stand-alone structure .13
4.2.2 Overlay structure .13
4.3 Structure and hierarchy .13
4.3.1 Type A generic cabling .13
4.3.2 Type B generic cabling .15
4.3.3 Centralized cabling .16
4.4 Cabling subsystems .16
4.4.1 Service distribution cabling subsystem (Type A generic cabling).16
4.4.2 Service distribution cabling subsystem (Type B generic cabling).17
4.4.3 Associated cabling subsystems .17
4.5 Design objectives .17
4.5.1 General .17
4.5.2 Service distribution cabling (Type A generic cabling) .18
4.5.3 Service distribution cabling subsystem (Type B generic cabling).18
4.5.4 Backbone cabling .19
4.5.5 Tie cabling .19
4.6 Accommodation of functional elements .19
4.6.1 General .19
4.6.2 Service Outlets.20
4.6.3 Distributors .20
4.6.4 Cables .20
4.6.5 Service Concentration Points .20
4.7 Interfaces .21
4.7.1 Equipment interfaces and test interfaces.21
4.7.2 Channels and links .22
4.8 Dimensioning and configuring .22
4.8.1 General .22
4.8.2 Type A generic cabling .24
4.8.3 Type B generic cabling .25
4.8.4 Service Concentration Point .26
4.8.5 Connecting hardware .26
4.9 Relevant building services .26
5 Requirement of channels for distributed building services . 27
5.1 General .27
5.2 Environmental performance .28
5.3 Transmission performance .28
5.3.1 General .28
5.3.2 Balanced cabling .28
5.3.3 Optical fibre cabling .29
6 Reference implementations for distributed building services. 29
6.1 General .29
6.2 Balanced cabling .29
6.2.1 General .29
6.2.2 Service distribution cabling (Type A generic cabling) .30
6.2.3 Service distribution cabling (Type B generic cabling) .33
6.2.4 Backbone cabling .34
6.3 Optical fibre .34
6.3.1 Service distribution cabling (Type A generic cabling) .34
6.3.2 Service distribution cabling (Type B generic cabling) .34
6.4 Backbone cabling .34
7 Requirements of cables for distributed building services . 34
7.1 General .34
7.2 Balanced cables of Category 6 , 7, 7A, 8.1 and 8.2 .34
A
7.3 Optical fibre cables of Category OM3, OM4, OM5, OS1a and OS2 .34
8 Requirements of connecting hardware for distributed building services . 35
8.1 General requirements .35
8.2 Balanced connecting hardware .35
8.2.1 General requirements .35
8.2.2 Electrical, mechanical and environmental performance .35
8.3 Connecting hardware for optical fibre cabling .35
8.3.1 General requirements .35
8.3.2 Optical, mechanical and environmental performance .35
9 Requirements for cords and jumpers for distributed building services . 36
9.1 Jumpers .36
9.2 Balanced cords of Category 6 , 7, 7 , 8.1 and 8.2 .36
A A
9.2.1 General .36
9.2.2 Additional requirements for certain cords .36
9.3 Optical fibre cords of Category OM3, OM4, OM5, OS1a and OS2 .36
Annex A (normative) Link performance limits . 37
A.1 General. 37
A.2 Balanced cabling . 37
A.3 Optical fibre cabling . 38
Annex B (informative) Services and applications . 39
B.1 Introduction . 39
B.2 Service sectors and services . 39
B.2.1 Access control .
...