iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61029-2-5:2011/A11:2015

(Amendment)

Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws

Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws

This amendment was developed to bring EN 61029-2-5:2011 in line with the European Machinery Directive 2006/42/EC
2021: CLC legacy converted by DCLab NISOSTS

Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-5: Besondere Anforderungen für Bandsägen

Sécurité des machines-outils électriques semi-fixes - Partie 2-5: Règles particulières pour les scies à ruban

Varnost premičnih električnih orodij - 2-5. del: Posebne zahteve za tračne žage - Dopolnilo A11

General Information

Status
Published
Publication Date
08-Jan-2015
Withdrawal Date
30-Nov-2016
ICS
25.080.60 - Sawing machines
25.140.20 - Electric tools
Technical Committee
CLC/TC 116 - Safety of hand-held motor-operated electric tools
Drafting Committee
CLC/TC 116 - Safety of hand-held motor-operated electric tools
Current Stage
6060 - Document made available - Publishing
Start Date
09-Jan-2015
Due Date
09-Jan-2016
Completion Date
09-Jan-2015
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Ref Project
SIST EN 61029-2-5:2012/A11:2015 - Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws

Relations

Amends
EN 61029-2-5:2011 - Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
Effective Date
28-Jan-2023

Buy Standard

EN 61029-2-5:2012/A11:2015EN 61029-2-5:2012/A11:2015
PreviousNext
Amendment
EN 61029-2-5:2012/A11:2015
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2015
9DUQRVWSUHPLþQLKHOHNWULþQLKRURGLMGHO3RVHEQH]DKWHYH]DWUDþQHåDJH
'RSROQLOR$
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements
for band saws
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-5: Besondere
Anforderungen für Bandsägen
Sécurité des machines-outils électriques semi-fixes - Partie 2-5: Règles particulières
pour les scies à ruban
Ta slovenski standard je istoveten z: EN 61029-2-5:2011/A11:2015
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61029-2-5:2011/A11

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2015
ICS 25.080.60; 25.140.20
English Version
Safety of transportable motor-operated electric tools -
Part 2-5: Particular requirements for band saws
Sécurité des machines-outils électriques semi-fixes -  Sicherheit transportabler motorbetriebener
Partie 2-5: Règles particulières pour les scies à ruban Elektrowerkzeuge -
Teil 2-5: Besondere Anforderungen für Bandsägen
This amendment A11 modifies the European Standard EN 61029-2-5:2011; it was approved by CENELEC on 2014-12-01. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by an
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 61029-2-11:2012/A11:2013(Amendment)
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
SIST EN 61029-2-11:2013/A11:2014

2013-07-10 - Publication editing allocated to cpalagi@cencenelec.eu 2013-02-04 - UAP text to be sent to Consultant prior to UAP D144/C006: NWI approved*2013-03-22: UAP processing allocated to aclausse@cencenelec.eu
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-11:2012(Main)
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
SIST EN 61029-2-11:2013

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-5:2011(Main)
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
SIST EN 61029-2-5:2012

Applies to transportable band saws having a length of saw band not more than 2 500 mm and band wheels having a diameter of not more than 315 mm.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-11:2012/A11:2013(Amendment)
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
SIST EN 61029-2-11:2013/A11:2014

2013-07-10 - Publication editing allocated to cpalagi@cencenelec.eu 2013-02-04 - UAP text to be sent to Consultant prior to UAP D144/C006: NWI approved*2013-03-22: UAP processing allocated to aclausse@cencenelec.eu
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-11:2012(Main)
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
SIST EN 61029-2-11:2013

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-5:2011(Main)
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
SIST EN 61029-2-5:2012

Applies to transportable band saws having a length of saw band not more than 2 500 mm and band wheels having a diameter of not more than 315 mm.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-9:2024(Main)
Rotating electrical machines - Part 9: Noise limits
SIST EN IEC 60034-9:2025

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: - standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level - rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) - rated speed not greater than 3 750 min–1 This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition: a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered. b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels. c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA. d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-12:2024(Main)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
SIST EN IEC 60034-12:2025

IEC 60034-12:2024 is available as IEC 60034-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-12:2024 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting; - are rated on the basis of duty type S1; - are constructed to any degree of protection as defined in IEC 60034-5 and explosion protection. This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. This fourth edition cancels and replaces the third edition published in 2016. Aligned with the requirements for explosion protected motors from TC31 WG27 - new clause on methods for measuring locked-rotor current and torque; - new informative annex on the general current and torque characteristics with locked rotor; - new informative annex on correction of voltage and frequency; - aligned with the requirements for explosion protected motors from TC31 WG27.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-39:2024(Main)
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
SIST EN IEC 60335-2-39:2025

IEC 60335-2-39:2012 deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household and similar use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. This standard also deals with pressurized appliances and appliances with pressurized parts. These appliances are used for processing food for commercial consumption, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. The principal changes in this edition as compared with the fifth edition of IEC 60335-2-39 are as follows (minor changes are not listed): - addition to definition of portable appliances, atmospheric multi-purpose cooking and rated pressure; - deletion of equipotential symbol 5021 of IEC 60417 covered by Part 1; - addition of instructions for multi-purpose cooking pans; - modification on leakage current permissible for portable class l appliances; - addition to abnormal test requirements; - addition to mechanical hazard test for multi-purpose cooking pans; - addition of construction test for multi-purpose cooking pans; - addition to construction requirements for lids and theirs grips; - addition to construction requirements for positioning of pressure reliefs; - addition to construction's fixed appliances which are moved forward and backward for cleaning purposes.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Multi-purpose cooking pans.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-40:2024(Main)
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
SIST EN IEC 60335-2-40:2025

This European Standard deals with the safety of electric heat pumps, sanitary hot water heat pumps and air conditioners, incorporating motor-compressors as well as hydronic fan coils units, dehumidifiers (with or without motor-compressors), thermoelectric heat pumps and partial units. Their maximum rated voltage being not more than 300 V for single phase appliances and 600 V for multi-phase appliances. Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.

  • Draft
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day