Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws

2013-07-10 - Publication editing allocated to cpalagi@cencenelec.eu 2013-02-04 - UAP text to be sent to Consultant prior to UAP D144/C006: NWI approved*2013-03-22: UAP processing allocated to aclausse@cencenelec.eu
2021: CLC legacy converted by DCLab NISOSTS

Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-11: Besondere Anforderungen für kombinierte Tisch- und Gehrungssägen

Sécurité des machines-outils électriques semi-fixes - Partie 2-11: Règles particulières pour les scies d'établi-scies à mortaiser

Varnost premičnih električnih orodij - 2-11. del: Posebne zahteve za kombinirane krožne žage z delovno mizo in za zajeralne žage - Dopolnilo A11

Ta evropski standard se uporablja za premične kombinirane krožne žage z delovno mizo ter zajeralne žage, katerih premer rezila je manjši od 315 mm ter so namenjene rezanju lesa in podobnih materialov, plastike ter barvnih kovin, razen magnezija.

General Information

Status
Published
Publication Date
05-Sep-2013
Withdrawal Date
11-Aug-2016
Current Stage
6060 - Document made available - Publishing
Start Date
06-Sep-2013
Completion Date
06-Sep-2013

Relations

Buy Standard

Amendment
EN 61029-2-11:2013/A11:2014
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2014
9DUQRVWSUHPLþQLKHOHNWULþQLKRURGLMGHO3RVHEQH]DKWHYH]DNRPELQLUDQH
NURåQHåDJH]GHORYQRPL]RLQ]D]DMHUDOQHåDJH'RSROQLOR$
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements
for combined mitre and bench saws
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-11: Besondere
Anforderungen für kombinierte Tisch- und Gehrungssägen
Sécurité des machines-outils électriques semi-fixes - Partie 2-11: Règles particulières
pour les scies d'établi-scies à mortaiser
Ta slovenski standard je istoveten z: EN 61029-2-11:2012/A11:2013
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61029-2-11/A11
NORME EUROPÉENNE
September 2013
EUROPÄISCHE NORM
ICS 25.080.60; 25.140.20
English version
Safety of transportable motor-operated electric tools -
Part 2-11: Particular requirements for combined mitre and bench saws

Sécurité des machines-outils électriques Sicherheit transportabler motorbetriebener
semi-fixes - Elektrowerkzeuge -
Partie 2-11: Règles particulières pour les Teil 2-11: Besondere Anforderungen für
scies d'établi-scies à mortaiser kombinierte Tisch- und Gehrungssägen

This amendment A11 modifies the European Standard EN 61029-2-11:2012; it was approved by CENELEC on
2013-08-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.