Live Working - Electrically insulating helmets for use on low and medium voltage installations

This standard is applicable to electrically insulating helmets used for working live or close to live parts on installations not exceeding 1 000 V AC or 1 500 V DC. These helmets, when used in conjunction with other electrically insulating protective equipment prevent dangerous current from passing through persons via their head.

Elektrisch isolierende Helme für Arbeiten an Nieder- und Mittelspannungsanlagen

Travaux sous tension - Casques électriquement isolants pour utilisation sur installations à basse et à moyenne tension

Le présent document spécifie les exigences et les essais électriques des casques électriquement isolants qui assurent une protection électrique isolante de la tête du travailleur contre les chocs électriques, utilisés lors des travaux sous tension ou à proximité de parties sous tension sur des installations ne dépassant pas 17 000 V en courant alternatif ou 1 500 V en courant continu. Les produits conçus et fabriqués conformément au présent document contribuent à la sécurité des utilisateurs, à condition qu’ils soient utilisés par des personnes qualifiées, conformément à l’EN 50110-1:2013 et/ou aux règlementations nationales. Le présent document ne traite ni des arcs électriques ni des accessoires supplémentaires pour casques tels que les visières, les protecteurs d’oreille, les lampes frontales et les détecteurs de tension, et ne couvre pas les exigences et essais mécaniques.

Delo pod napetostjo - Elektroizolacijske čelade za delo na nizko- in srednjenapetostnih inštalacijah

General Information

Status
Not Published
Publication Date
14-Jan-2024
Current Stage
5060 - Voting results sent to TC, SR - Formal Approval
Start Date
27-Oct-2023
Completion Date
27-Oct-2023

Relations

Buy Standard

Draft
prEN 50365:2021 - BARVE
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 50365:2021
01-januar-2021
Nadomešča:
SIST EN 50365:2002
Delo pod napetostjo - Elektroizolacijske čelade za delo na nizko- in
srednjenapetostnih inštalacijah
Live Working - Electrically insulating helmets for use on low and medium voltage
installations
Elektrisch isolierende Helme für Arbeiten an Niederspannungsanlagen
Casques électriquement isolants pour utilisation sur installations à basse tension
Ta slovenski standard je istoveten z: prEN 50365
ICS:
13.260 Varstvo pred električnim Protection against electric
udarom. Delo pod napetostjo shock. Live working
13.340.20 Varovalna oprema za glavo Head protective equipment
oSIST prEN 50365:2021 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50365:2021

---------------------- Page: 2 ----------------------
oSIST prEN 50365:2021

EUROPEAN STANDARD DRAFT
prEN 50365
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2020
ICS  Will supersede EN 50365:2002 and all of its
amendments and corrigenda (if any)
English Version
Live Working - Electrically insulating helmets for use on low and
medium voltage installations
Casques électriquement isolants pour utilisation sur Elektrisch isolierende Helme für Arbeiten an
installations à basse tension Niederspannungsanlagen
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2021-02-05.

It has been drawn up by CLC/TC 78.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 66984 Ref. No. prEN 50365 E

---------------------- Page: 3 ----------------------
oSIST prEN 50365:2021
prEN 50365:2020 (E)
1 Contents Page
2 European foreword .3
3 1 Scope .4
4 2 Normative references .4
5 3 Terms and definitions .4
6 4 Requirements .5
7 4.1 General .5
8 4.2 Non-electrical requirements.5
9 4.3 Electrical requirements .6
10 4.4 Marking .6
11 4.5 Packaging .7
12 4.6 Instruction of use .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.