Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets

Deals with the safety of electric multifunctional shower cabinets for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard however, in general, does not take into account - the use of appliances by young children or infirm persons without supervision or playing with the appliance by young children.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-105: Besondere Anforderungen für multifunktionelle Duscheinrichtungen

Appareils électrodomestiques et analogues - Sécurité - Partie 2-105: Règles particulières pour les cabines de douche multifonctions

Traite de la sécurité des cabines de douche multifonctions électriques pour usages domestiques et analogues, dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. Cependant, cette norme ne tient en général pas compte - de l'utilisation des appareils par de jeunes enfants ou par des personnes handicapées, sans surveillance; de l'emploi de l'appareil comme jouet par de jeunes enfants.

Gospodinjski in podobni električni aparati - Varnost - 2-105. del: Posebne zahteve za večnamenske kabine za prhanje (IEC 60335-2-105:2004)

General Information

Status
Published
Publication Date
16-Feb-2005
Current Stage
6060 - Document made available
Due Date
17-Feb-2005
Completion Date
17-Feb-2005

RELATIONS

Buy Standard

Standard
EN 60335-2-105:2005
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI SIST EN 60335-2-105:2005
STANDARD
junij 2005
Gospodinjski in podobni električni aparati - Varnost - 2-105. del: Posebne
zahteve za večnamenske kabine za prhanje (IEC 60335-2-105:2004)
Household and similar electrical appliances - Safety -- Part 2-105: Particular
requirements for multifunctional shower cabinets
ICS 91.140.70 Referenčna številka
SIST EN 60335-2-105:2005(en)

© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60335-2-105
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2005
ICS 13.120; 97.170
English version
Household and similar electrical appliances -
Safety
Part 2-105: Particular requirements for multifunctional shower cabinets
(IEC 60335-2-105:2004)
Appareils électrodomestiques Sicherheit elektrischer Geräte für den
et analogues - Hausgebrauch und ähnliche Zwecke
Sécurité Teil 2-105: Besondere Anforderungen
Partie 2-105: Règles particulières für mulitifunktionelle Duscheinrichtungen
pour les cabines de douche multifonctions (IEC 60335-2-105:2004)
(CEI 60335-2-105:2004)

This European Standard was approved by CENELEC on 2004-12-01. CENELEC members are bound to

comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and

notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,

Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60335-2-105:2005 E
---------------------- Page: 2 ----------------------
EN 60335-2-105:2005 - 2 -
Foreword

The text of document 61/2737/FDIS, future first edition of IEC 60335-2-105, prepared by the IEC

Technical Committee 61, was submitted to the IEC-CENELEC parallel vote and was approved by

CENELEC as EN 60335-2-105 on 2004-12-01.
The following dates are applicable:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-09-01
- date on which national standards
conflicting with the EN have to be withdrawn (dow) 2007-12-01

This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical

appliances – Safety – Part 1: General requirements. It was established on the basis of the 2002

edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and

the dates when such changes become applicable will be stated in the relevant amendment or revision

of Part 1.

This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into

the European Standard: Safety requirements for electric multifunctional shower cabinets.

When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as

is reasonable. When this standard states "addition", "modification" or "replacement", the relevant text

of Part 1 is to be adapted accordingly.
NOTE 1 The following numbering system is used:

– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;

– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a

replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.;

– subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.

NOTE 2 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.

Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated

noun are also in bold.

There are no special national conditions causing a deviation from this European Standard, other than

those listed in Annex ZA to EN 60335-1.

There are no national deviations from this European Standard, other than those listed in Annex ZB to

EN 60335-1.

p NOTE In this document, p is used in the margin to indicate instructions for preparing the printed version.

_____________
---------------------- Page: 3 ----------------------
- 3 - EN 60335-2-105:2005
Introduction
p Add:

An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this

standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical

moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown

that the risks are mainly of electrical origin and consequently this directive is not applicable. However,

the relevant essential safety requirements of the Machinery Directive are covered by this standard

together with the principal objectives of the Low Voltage Directive.
____________
Endorsement notice

The text of the International Standard IEC 60335-2-105:2004 was approved by CENELEC as a

European Standard without any modification.
____________
---------------------- Page: 4 ----------------------
EN 60335-2-105:2005 - 4 -
p Add:
Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications
Publication Year Title EN/HD Year
ISO 3864-1 2002 Graphical symbols – Safety colours and – –
safety signs
Part 1: Design principles for safety signs in
workplaces and public areas
____________
---------------------- Page: 5 ----------------------
NORME CEI
INTERNATIONALE
IEC
60335-2-105
INTERNATIONAL
Première édition
STANDARD
First edition
2004-11
Appareils électrodomestiques et analogues –
Sécurité –
Partie 2-105:
Règles particulières pour les cabines
de douche multifonctions
Household and similar electrical appliances –
Safety –
Part 2-105:
Particular requirements for multifunctional
shower cabinets
 IEC 2004 Droits de reproduction réservés  Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any

utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including

électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from

microfilms, sans l'accord écrit de l'éditeur. the publisher.

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland

Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

CODE PRIX
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 6 ----------------------
60335-2-105  IEC:2004 – 3 –
CONTENTS

FOREWORD...........................................................................................................................3

INTRODUCTION.....................................................................................................................9

1 Scope.............................................................................................................................11

2 Normative references.....................................................................................................11

3 Definitions......................................................................................................................13

4 General requirement.......................................................................................................13

5 General conditions for the tests ......................................................................................13

6 Classification..................................................................................................................13

7 Marking and instructions.................................................................................................13

8 Protection against access to live parts............................................................................17

9 Starting of motor-operated appliances ............................................................................17

10 Power input and current .................................................................................................17

11 Heating..........................................................................................................................17

12 Void .............................................................................................................................19

13 Leakage current and electric strength at operating temperature......................................19

14 Transient overvoltages...................................................................................................19

15 Moisture resistance........................................................................................................19

16 Leakage current and electric strength.............................................................................21

17 Overload protection of transformers and associated circuits ...........................................21

18 Endurance......................................................................................................................21

19 Abnormal operation........................................................................................................21

20 Stability and mechanical hazards ...................................................................................21

21 Mechanical strength.......................................................................................................23

22 Construction...................................................................................................................23

23 Internal wiring.................................................................................................................23

24 Components...................................................................................................................25

25 Supply connection and external flexible cords ................................................................25

26 Terminals for external conductors...................................................................................25

27 Provision for earthing.....................................................................................................25

28 Screws and connections .................................................................................................25

29 Clearances, creepage distances and solid insulation ......................................................25

30 Resistance to heat and fire.............................................................................................25

31 Resistance to rusting......................................................................................................27

32 Radiation, toxicity and similar hazards............................................................................27

Annexes ...............................................................................................................................29

Annex AA (informative) Example of a multifunctional shower cabinet ....................................29

Bibliography..........................................................................................................................30

---------------------- Page: 7 ----------------------
60335-2-105  IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
__________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-105: Particular requirements for
multifunctional shower cabinets
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any

equipment declared to be in conformity with an IEC Publication.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

This part of international standard IEC 60335 has been prepared by IEC technical committee

61: Safety of household and similar electrical appliances.
It forms the first edition of 60335-2-105.
The text of this part of IEC 60335 is based on the following documents:
FDIS Report on voting
61/2737/FDIS 61/2789/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.
---------------------- Page: 8 ----------------------
60335-2-105  IEC:2004 – 7 –

This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its

amendments. It was established on the basis of the fourth edition (2001) of that standard.

NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.

This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to

convert that publication into the IEC standard: Safety requirements for electric multifunctional

shower cabinets.

When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies

as far as is reasonable. When this standard states "addition", "modification" or "replacement",

the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:

– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;

– unless notes are in a new subclause or involve notes in Par
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.