Digital addressable lighting interface - Part 102: General requirements - Control gear

IEC 62386-102:2009 specifies a protocol and methods of test for the control by digital signals of electronic control gear for use on a.c. or d.c. supplies. This Part 102 is intended to be used in conjunction with Part 101, which contains general requirements for the relevant product type (system), and with the appropriate part 2XX (particular requirements for control gear) containing clauses to supplement or modify the corresponding clauses in Parts 101 and 102 in order to provide the relevant requirements for each type of product. This International Standard, together with IEC 62386-101 and IEC 62386-201, replaces Clause E.4, 'Control by digital signals', and Annex G, 'Test procedures for ballasts with digital control interface according to Clause E.4', of IEC 60929:2006.

Digital adressierbare Schnittstelle für die Beleuchtung - Teil 102: Allgemeine Anforderungen - Betriebsgeräte

Interface d'éclairage adressable numérique - Partie 102: Exigences générales - Appareillages de commande

La CEI 62386-102:2009 spécifie un protocole et des méthodes d'essai pour la commande par signaux numériques des appareillages de commande électroniques destinés à être utilisés dans les alimentations alternatives ou continues. La présente Partie 102 est destinée à être utilisée conjointement avec la Partie 101 appropriée, qui contient les exigences générales pour le type de produit applicable (système), et avec la partie 2XX appropriée (exigences particulières pour les appareillages) qui comporte les articles complétant ou modifiant les articles correspondants de la Partie 101 et Partie 102, afin d'établir les règles complètes pour chaque type de produit. La présente Norme internationale, ainsi que la CEI 62386-101 et la CEI 62386-201, remplacent l'Article E.4 'Commande par signaux numériques' et l'Annexe G 'Procédures d'essai pour les ballasts avec interface de commande numérique selon l'Article E.4' de la CEI 60929:2006.

Digitalni naslovljivi vmesnik za razsvetljavo - 102. del: Splošne zahteve - Krmilje (IEC 62386-102:2009)

General Information

Status
Withdrawn
Publication Date
26-Aug-2009
Withdrawal Date
30-Jun-2012
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
12-Dec-2017
Completion Date
12-Dec-2017

Relations

Buy Standard

Standard
EN 62386-102:2009
English language
142 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62386-102:2009
01-november-2009
1DGRPHãþD
SIST EN 60929:2006
Digitalni naslovljivi vmesnik za razsvetljavo - 102. del: Splošne zahteve - Krmilje
(IEC 62386-102:2009)
Digital addressable lighting interface - Part 102: General requirements - Control gear
(IEC 62386-102:2009)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 102: Allgemeine
Anforderungen - Betriebsgeräte (IEC 62386-102:2009)
Interface d'éclairage adressable numérique - Partie 102: Exigences générales -
Appareillages (CEI 62386-102:2009)
Ta slovenski standard je istoveten z: EN 62386-102:2009
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62386-102:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62386-102:2009

---------------------- Page: 2 ----------------------

SIST EN 62386-102:2009

EUROPEAN STANDARD
EN 62386-102

NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM

ICS 29.140.50; 29.140.99 Partially supersedes EN 60929:2006


English version


Digital addressable lighting interface -
Part 102: General requirements -
Control gear
(IEC 62386-102:2009)


Interface d'éclairage  Digital adressierbare Schnittstelle
adressable numérique - für die Beleuchtung -
Partie 102: Exigences générales - Teil 102: Allgemeine Anforderungen -
Appareillages de commande Betriebsgeräte
(CEI 62386-102:2009) (IEC 62386-102:2009)




This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62386-102:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62386-102:2009
EN 62386-102:2009 - 2 -
Foreword
The text of document 34C/874/FDIS, future edition 1 of IEC 62386-102, prepared by SC 34C, Auxiliaries
for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62386-102 on 2009-07-01.
EN 62386-102:2009, together with EN 62386-101 and EN 62386-201, replaces Clause E.4, “Control by
digital signals”, and Annex G, "Test procedures for ballasts with digital control interface according to
Clause E.4" of EN 60929:2006.
This Part 102 is intended to be used in conjunction with Part 101, which contains general requirements
for the relevant product type (system), and with the appropriate part 2XX (particular requirements for
control gear) containing clauses to supplement or modify the corresponding clauses in Parts 101 and 102
in order to provide the relevant requirements for each type of product.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2012-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62386-102:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60598-1 NOTE  Harmonized as EN 60598-1:2008 (modified).
IEC 60669-2-1 NOTE  Harmonized as EN 60669-2-1:2004 (modified).
IEC 60921 NOTE  Harmonized as EN 60921:2004 (not modified).
IEC 60923 NOTE  Harmonized as EN 60923:2005 (not
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.