EN 62386-201:2009
(Main)Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0)
Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0)
IEC 62386-201:2009 specifies a protocol and methods of test for the control by digital signals of electronic control gear for use on a.c. or d.c. supplies, associated with fluorescent lamps. This part 201 is intended to be used in conjunction with IEC 62386-101 and IEC 62386-102, which contain general requirements for the relevant product type (control gear or control devices). IEC 62386-101, IEC 62386-102 and IEC 62386-201 replace IEC 60929 Edition 3, Clause E.4 'Control by digital signals' and Annex G 'Test procedures for ballasts with digital control interface according to Clause E.4'.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 201: Besondere Anforderungen an Betriebsgeräte - Leuchtstofflampen (Gerätetyp 0)
Interface d'éclairage adressable numérique - Partie 201: Exigences particulières pour les appareillages de commande - Lampes fluorescentes (dispositifs de type 0)
La CEI 62386-201:2009 spécifie un protocole et des méthodes d'essai pour la commande par des signaux numériques des appareillages électroniques destinés à être utilisés dans les alimentations alternatives ou continues, associés aux lampes fluorescentes. La présente partie 201 est destinée à être utilisée conjointement avec la CEI 62386-101 et la CEI 62386-102, qui contiennent les exigences générales pour le type de produit applicable (appareillage ou dispositifs de commande). La CEI 62386-101, la CEI 62386-102 et la CEI 62386-201 remplacent la CEI 60929 Edition 3, Article E.4, 'Commande par signaux numériques' et l'Annexe G 'Procédures d'essai pour les ballasts avec interface de commande numérique selon l'Article E.4'.
Digitalni naslovljivi vmesnik za razsvetljavo - 201. del: Posebne zahteve za krmilja - Fluorescentne sijalke (naprava tipa 0) (IEC 62386-201:2009)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2009
1DGRPHãþD
SIST EN 60929:2006
Digitalni naslovljivi vmesnik za razsvetljavo - 201. del: Posebne zahteve za krmilja -
Fluorescentne sijalke (naprava tipa 0) (IEC 62386-201:2009)
Digital addressable lighting interface - Part 201: Particular requirements for control gear -
Fluorescent lamps (device type 0) (IEC 62386-201:2009)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 201: Besondere
Anforderungen an Betriebsgeräte - Leuchtstofflampen (Gerätetyp 0) (IEC 62386-
201:2009)
Interface d'éclairage adressable numérique - Partie 201: Exigences particulières pour les
appareillages - Lampes fluorescentes (dispositifs de type 0) (CEI 62386-201:2009)
Ta slovenski standard je istoveten z: EN 62386-201:2009
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62386-201
NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM
ICS 29.140.50; 29.140.99 Partially supersedes EN 60929:2006
English version
Digital addressable lighting interface -
Part 201: Particular requirements for control gear -
Fluorescent lamps (device type 0)
(IEC 62386-201:2009)
Interface d'éclairage Digital adressierbare Schnittstelle
adressable numérique - für die Beleuchtung -
Partie 201: Exigences particulières Teil 201: Besondere Anforderungen
pour les appareillages de commande - an Betriebsgeräte -
Lampes fluorescentes Leuchtstofflampen (Gerätetyp 0)
(dispositifs de type 0) (IEC 62386-201:2009)
(CEI 62386-201:2009)
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62386-201:2009 E
Foreword
The text of document 34C/784/CDV, future edition 1 of IEC 62386-201, prepared by SC 34C, Auxiliaries
for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62386-201 on 2009-07-01.
digital signals” and Annex G “Test procedures for ballasts with digital control interface according to
Clause E.4” of EN 60929:2006.
This Part 201 is intended to be used in conjunction with EN 62386-101 and EN 62386-102, which contain
general requirements for the relevant product type (control gear or control devices).
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2012-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62386-201:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60598-1 NOTE Harmonized as EN 60598-1:2008 (modified).
IEC 60669-2-1 NOTE Harmonized as EN 60669-2-1:2004 (modified).
IEC 60921 NOTE Harmonized as EN 60921:2004 (not modified).
IEC 60923 NOTE Harmonized as EN 60923:2005 (not modified).
IEC 60925 NOTE Harmonized as EN 60925:1991 (not modified).
IEC 60929 NOTE Harmonized as EN 60929:2006 (not modified).
IEC 61347-1 NOTE Harmonized as EN 61347-1:2007 (modified).
IEC 61347-2-3 NOTE Harmonized as EN 61347-2-3:2001 (not modified).
IEC 61547 NOTE Harmonized as EN 61547:2009 (not modified).
CISPR 15 NOTE Harmonized as EN 55015:2006 (not modified).
__________
- 3 - EN 62386-201:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 62386-101 2009 Digital addressable lighting interface - EN 62386-101 2009
Part 101: General requirements - System
IEC 62386-102 2009 Digital addressable lighting interface - EN 62386-102 2009
Part 102: General requirements - Control gear
IEC 62386-201 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Digital addressable lighting interface –
Part 201: Particular requirements for control gear – Fluorescent lamps (device
type 0)
Interface d'éclairage adressable numérique –
Partie 201: Exigences particulières pour les appareillages de commande –
Lampes fluorescentes (dispositifs de type 0)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
L
CODE PRIX
ICS 29.140.50; 29.140.99 ISBN 2-8318-9599-5
– 2 – 62386-201 © IEC:2009
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 General .6
5 Electrical specification.6
6 Interface power supply .6
7 Transmission protocol structure.6
8 Timing .7
9 Method of operation .7
10 Declaration of variables .7
11 Definition of commands .7
12 Test procedures .8
Bibliography.11
Figure 1 – Test sequence "QUERY EXTENDED VERSION NUMBER" .9
Figure 2 – Test sequence "Unused application extended commands for device type 0".10
Table 1 – Declaration of variables.7
Table 2 – Summary of the application extended command set .8
62386-201 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 201: Particular requirements for control gear –
Fluorescent lamps (device type 0)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62386-201 has been prepared by subcommittee 34C: Auxiliaries
for lamps, of IEC technical committee 34: Lamps and related equipment.
The text of this standard is based on the following documents:
CDV Report on voting
34C/784/CDV 34C/812/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
IEC 62386-101, IEC 62386-102 and IEC 62386-201 replace IEC 60929 Edition 3, Clause E.4
“Control by digital signals” and Annex G “Test procedures for ballasts with digital control
interface according to Clause E.4”.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – 62386-201 © IEC:2009
This part 201 is intended to be used in conjunction with IEC 62386-101 and IEC 62386-102,
which contain general requirements for the relevant product type (control gear or control
devices).
A list of all parts of the IEC 62386 series, under the general title Digital addressable lighting
interface, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
62386-201 © IEC:2009 – 5 –
INTRODUCTION
This first edition of IEC 62386-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.