Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and Handling

NEW!IEC 60721-3-2:2018 is available as IEC 60721-3-2:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60721-3-2:2018 classifies the groups of environmental parameters and their severities to which a product is subjected while being transported and handled. The most commonly used methods of transportation and handling have been taken into account, including the following: - road transport: cars, trucks; - rail transport: trains, trams; - water transport, inland and maritime: ships; - air transport: aircraft, jet, propeller, helicopter; - handling equipment: cranes, transport lifts, cableways, persons; - conveyors; - hand trollies. This third edition cancels and replaces the second edition, published in 1997, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a. Clause 1: reworded and added handling. b. Clause 2: updated normative references. c. Clause 3: updated definitions. d. Clause 4: reworded and simplified. e. Clause 5: revised and updated. Several classes have been replaced by completely new classes based on the use of new information obtained from referenced Technical Reports. f. Table 1 through Table 5: updated. g. Table 6 added. h. Old annexes A to C removed except Clause A.3 that is incorporated in Clause 5. i. New Annex A.

Klassifizierung von Umgebungsbedingungen – Teil 3-2: Klassen von Einflussgrößen und deren Grenzwerte – Transport und Handhabung

Classification des conditions d'environnement - Partie 3-2: Classification des groupements des agents d'environnement et de leurs sévérités - Transport et manutention

NEW!IEC 60721-3-2:2018 est disponible sous forme de IEC 60721-3-2:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 60721-3-2:2018 classifie les groupements d’agents d’environnement et de leurs sévérités auxquelles un produit est soumis lors de son transport et de sa manutention. Il a été tenu compte des moyens de transport les plus couramment employés, y compris les moyens suivants: - transports routiers: voitures, camions; - transports ferroviaires: trains, tramways; - transport par voies navigables, fluviales et maritimes: navires; - transports aériens: avions (à propulsion, à hélice), hélicoptères; - matériel de manutention: grues, monte-charges, téléphériques, personnes; - courroies transporteuses; - chariots manuels. Cette troisième édition annule et remplace la deuxième édition, parue en 1997. Elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a. Article 1: reformulation et ajout de la manutention. b. Article 2: mise à jour des références normatives. c. Article 3: mise à jour des définitions. d. Article 4: reformulé et simplifié. e. Article 5: révisé et mis à jour. Plusieurs catégories ont été remplacées par des catégories complètement nouvelles sur la base de nouvelles informations obtenues à partir des rapports techniques référencés. f. Tableau 1 au Tableau 5: mise à jour. g. Tableau 6 ajouté. h. Suppression des anciennes annexes A à C à l’exception de l’Article A.3 qui est intégré dans l’Article 5. i. Nouvelle Annexe A.

Klasifikacija okoljskih pogojev - 3-2. del: Razvrščanje skupin okoljskih parametrov in njihove resnosti - Transport in ravnanje (IEC 60721-3-2:2018)

Ta del standarda IEC 60721 razvršča skupine okoljskih parametrov in njihove resnosti, ki so jim proizvodi izpostavljeni pri transportu in ravnanju.
Upoštevane so bile najpogostejše uporabljene metode transporta in ravnanja, vključno z/s:
– cestnim transportom: avtomobili, tovornjaki;
– železniškim transportom: vlaki, tramvaji;
– vodnim transportom: v celinskih in odprtih vodah: ladje;
– zračni transport: letalo, reaktivno letalo, propelersko letalo, helikopter;
– opremo za ravnanje s proizvodi: žerjavi, transportna dvigala, žičniške naprave, osebe;
– tračnimi transporterji;
– ročnimi vozički.
Okoljskim pogojem, navedenim v tem dokumentu, so proizvodi lahko izpostavljeni med transportom in ravnanjem. Če je proizvod zapakiran, veljajo okoljski pogoji za embalažo, v kateri je proizvod zapakiran. Če proizvod ni zapakiran, veljajo okoljski pogoji za proizvod.
Pogoji za skladiščenje so podani v standardu IEC 60721-3-1.

General Information

Status
Published
Publication Date
12-Apr-2018
Withdrawal Date
29-Mar-2021
Current Stage
6060 - Document made available - Publishing
Start Date
13-Apr-2018
Completion Date
13-Apr-2018

Relations

Buy Standard

Standard
EN IEC 60721-3-2:2018 - BARVE
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Classification des conditions d'environnement - Partie 3: Classification des groupements des agents d'environnement et de leurs sévérités - Section 2: Transport (IEC 60721-3-2:2018)Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and Handling (IEC 60721-3-2:2018)19.040Preskušanje v zvezi z okoljemEnvironmental testingICS:Ta slovenski standard je istoveten z:EN IEC 60721-3-2:2018SIST EN IEC 60721-3-2:2018en01-junij-2018SIST EN IEC 60721-3-2:2018SLOVENSKI
STANDARDSIST EN 60721-3-2:20011DGRPHãþD



SIST EN IEC 60721-3-2:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 60721-3-2
April 2018 ICS 19.040
Supersedes
EN 60721-3-2:1997
English Version
Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and Handling (IEC 60721-3-2:2018)
Classification des conditions d'environnement - Partie 3-2: Classification des groupements des agents d'environnement et de leurs sévérités - Transport et manutention (IEC 60721-3-2:2018)
Klassifizierung von Umgebungsbedingungen - Teil 3-2: Klassifizierung von Einflussgrößen in Gruppen und deren Schärfegrade - Transport und Handhabung (IEC 60721-3-2:2018) This European Standard was approved by CENELEC on 2018-03-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60721-3-2:2018 E SIST EN IEC 60721-3-2:2018



EN IEC 60721-3-2:2018 (E) 2 European foreword The text of document 104/773/FDIS, future edition 3 of IEC 60721-3-2, prepared by IEC/TC 104 "Environmental conditions, classification, and methods of test" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60721-3-2:2018.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-12-30 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-03-30
This document supersedes EN 60721-3-2:1997.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60721-3-2:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60721-2 (series) NOTE Harmonized as EN 60721-2 (series). IEC 60721-2-1 NOTE Harmonized as EN 60721-2-1. IEC 60721-2-2 NOTE Harmonized as EN 60721-2-2. IEC 60721-2-3 NOTE Harmonized as EN 60721-2-3. IEC 60721-2-9 NOTE Harmonized as EN 60721-2-9. IEC 60721-3 (series) NOTE Harmonized as EN 60721-3 (series). IEC 60721-3-0 NOTE Harmonized as EN 60721-3-0. IEC 60721-3-1 NOTE Harmonized as EN 60721-3-1. SIST EN IEC 60721-3-2:2018



EN IEC 60721-3-2:2018 (E) 3 Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an Internatio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.