EN 55024:2010/A1:2015
(Amendment)Information technology equipment - Immunity characteristics - Limits and methods of measurement
Information technology equipment - Immunity characteristics - Limits and methods of measurement
Einrichtungen der Informationstechnik - Störfestigkeitseigenschaften - Grenzwerte und Prüfverfahren
Appareils de traitement de l'information - Caractéristiques d'immunité - Limites et méthodes de mesure
Oprema za informacijsko tehnologijo - Karakteristike odpornosti proti motnjam - Mejne vrednosti in merilne metode - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2015
Oprema za informacijsko tehnologijo - Karakteristike odpornosti proti motnjam -
Mejne vrednosti in merilne metode - Dopolnilo A1
Information technology equipment - Immunity characteristics - Limits and methods of
measurement
Appareils de traitement de l'information - Caractéristiques d'immunité - Limites et
méthodes de mesure
Ta slovenski standard je istoveten z: EN 55024:2010/A1:2015
ICS:
33.100.20 Imunost Immunity
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 55024:2010/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2015
ICS 33.100.20
English Version
Information technology equipment - Immunity characteristics -
Limits and methods of measurement
(CISPR 24:2010/A1:2015)
Appareils de traitement de l'information - Caractéristiques Einrichtungen der Informationstechnik -
d'immunité - Limites et méthodes de mesure Störfestigkeitseigenschaften - Grenzwerte und
(CISPR 24:2010/A1:2015) Prüfverfahren
(CISPR 24:2010/A1:2015)
This amendment A1 modifies the European Standard EN 55024:2010; it was approved by CENELEC on 2015-05-22. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 55024:2010/A1:2015 E
Foreword
The text of document CIS/I/500/FDIS, future CISPR 24:2010/A1, prepared by CISPR SC I
"Electromagnetic compatibility of information technology equipment, multimedia equipment and
receivers" of CISPR "International special committee on radio interference" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 55024:2010/A1:2015.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2016-02-22
national level by publication of an identical national
standard or by endorsement
(dow) 2018-05-22
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directives, see informative Annex ZZ, included in EN 55024:2010.
Endorsement notice
The text of the International Standard CISPR 24:2010/A1:2015 was approved by CENELEC as a
European Standard without any modification.
CISPR 24 ®
Edition 2.0 2015-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INT ERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
C OMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
AMENDMENT 1
AMENDEMENT 1
Information technology equipment – Immunity characteristics – Limits and
methods of measurement
Appareils de traitement de l'information – Caractéristiques d'immunité – Limites
et méthodes de mesure
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.20 ISBN 978-2-8322-2615-5
– 2 – CISPR 24:2010/AMD1:2015
© IEC 2015
FOREWORD
This amendment has been prepared by subcommittee CIS/I: Electromagnetic compatibility of
information technology equipment, multimedia equipment and receivers.
The text of this amendment is based on the following documents:
FDIS Report on voting
CIS/I/500/FDIS CIS/I/504/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
_____________
4.2.1 Electrostatic discharges (ESD)
Replace the existing eighth paragraph starting with "For contact discharge…" by the following
new paragraph:
For contact discharges, there is no requirement to apply discharges at voltages below the test
level defined in Table 1.
4.2.3.1 General
Add, at the end of the existing text, the following new text:
Recognising that a 1 % step size is preferred, the frequency range can be swept incrementally
with a step size not exceeding 4 % of the previous frequency with a test level of twice the
value of the specified test level in order to reduce the testing time for equipment requiring
testing in multiple configurations and/or long cycle times.
The step size and test level used shall be recorded in the test report.
CISPR 24:2010/AMD1:2015 – 3 –
© IEC 2015
Table 3 – Immunity, input d.c. power port (excluding equipment marketed with a a.c./d.c.
power converter)
Rep
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.