EN 61332:2005
(Main)Soft ferrite material classification
Soft ferrite material classification
Specifies classification rules for soft ferrite materials used in inductive components (inductors and transformers) fulfilling the requirements of the electronic industries. Provides cross-reference between materials from multiple suppliers; assistance to customers in understanding the published technical data in catalogues when comparing multiple suppliers; guidance to customers in selecting the most applicable material for each application; nomenclature for IEC standards relating to ferrites.
Werkstoffeigenschaften von Ferritmaterialien
Classification des matériaux ferrites doux
Klasifikacija mehkoferitnih materialov (IEC 61332:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61332:2006
01-marec-2006
1DGRPHãþD
SIST EN 61332:2002
Klasifikacija mehkoferitnih materialov (IEC 61332:2005)
Soft ferrite material classification
Werkstoffeigenschaften von Ferritmaterialien
Classification des matériaux ferrites doux
Ta slovenski standard je istoveten z: EN 61332:2005
ICS:
29.030 Magnetni materiali Magnetic materials
SIST EN 61332:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61332:2006
---------------------- Page: 2 ----------------------
SIST EN 61332:2006
EUROPEAN STANDARD EN 61332
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2005
ICS 29.100.10 Supersedes EN 61332:1997
English version
Soft ferrite material classification
(IEC 61332:2005)
Classification des matériaux ferrites doux Werkstoffeigenschaften von
(CEI 61332:2005) Ferritmaterialien
(IEC 61332:2005)
This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61332:2005 E
---------------------- Page: 3 ----------------------
SIST EN 61332:2006
EN 61332:2005 - 2 -
Foreword
The text of document 51/832/FDIS edition 2 of IEC 61332, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61332 on 2005-10-01.
This European Standard supersedes EN 61332:1997.
It includes the following significant technical changes with respect to EN 61332:1997.
a) the scope has been reviewed;
b) the column of temperature coefficient of SP class ferrite material has been omitted;
c) the measuring frequency for relative loss factor of SP class has been specified;
d) the parameters of SP class has been coordinated with EN 60401-3.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61332:2005 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 61332:2006
- 3 - EN 61332:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-221 1990 International electrotechnical vocabulary - -
Chapter 221: Magnetic materials and
components
IEC 60401-3 2003 Terms and nomenclature for cores made EN 60401-3 2003
of magnetically soft ferrites
Part 3: Guidelines on the format of data
appearing in manufacturers' catalogues of
transformer and inductor cores
---------------------- Page: 5 ----------------------
SIST EN 61332:2006
---------------------- Page: 6 ----------------------
SIST EN 61332:2006
INTERNATIONAL IEC
STANDARD 61332
Second edition
2005-09
Soft ferrite material classification
IEC 2005 Copyright - a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.