iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60947-2:1996

(Main)

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

States the characteristics of circuit breakers, the conditions with which they shall comply: (operation and behaviour in normal service, operation and behaviour in case of overload and operation and behaviour in case of short-circuit, dielectic properties), tests intended for confirming that these conditions have been met and the methods to be adopted for these Eests, and information to be marked on or given with the apparatus.

Niederspannungsschaltgeräte - Teil 2: Leistungsschalter

Appareillage à basse tension - Partie 2: Disjoncteurs

Fixe les caractéristiques des disjoncteurs; les conditions auxquels ils doivent répondre (fonctionnement et tenue en service normal, fonctionnement et tenue en cas de surcharge et en cas de court-circuit; propriétés diélectriques); les essais destinés à vérifier si ces conditions sont remplies et les méthodes à adopter pour les essais; et les informations à marquer sur les appareils ou à fournir avec ceux-ci.

Nizkonapetostne stikalne in krmilne naprave – 2. del: Odklopniki

General Information

Status
Withdrawn
Publication Date
09-Jan-1996
Withdrawal Date
30-Sep-1997
ICS
29.120.50 - Fuses and other overcurrent protection devices
Technical Committee
CLC/TC 17B - Low-voltage switchgear and controlgear including dimensional standardization
Drafting Committee
IEC/SC 17B - IEC_SC_17B
Parallel Committee
IEC/SC 17B - IEC_SC_17B
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jun-2006
Completion Date
01-Jun-2006
Directive
2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
SIST EN 60947-2:1998 - Low-voltage switchgear and controlgear -- Part 2: Circuit-breakers

Relations

Replaces
EN 60947-2:1991/A1:1993 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
Effective Date
29-Jan-2023
Replaced By
EN 60947-2:2003 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
Effective Date
28-Jan-2023
Amended By
EN 60947-2:1996/A11:1997 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
Effective Date
29-Jan-2023
Amended By
EN 60947-2:1996/A2:2001 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
Effective Date
28-Jan-2023

Buy Standard

EN 60947-2:1998EN 60947-2:1998
PreviousNext
Standard
EN 60947-2:1998
English language
136 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nizkonapetostne stikalne in krmilne naprave – 2. del: OdklopnikiNiederspannungsschaltgeräte -- Teil 2: LeistungsschalterAppareillage à basse tension -- Partie 2: DisjoncteursLow-voltage switchgear and controlgear -- Part 2: Circuit-breakers29.130.20Nizkonapetostne stikalne in krmilne napraveLow voltage switchgear and controlgearICS:Ta slovenski standard je istoveten z:EN 60947-2:1996SIST EN 60947-2:1998en01-junij-1998SIST EN 60947-2:1998SLOVENSKI
STANDARDSIST EN 60947-2:19951DGRPHãþD



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998



SIST EN 60947-2:1998

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60691:2023(Main)
Thermal-links - Requirements and application guide
SIST EN IEC 60691:2024

IEC 60691:2023 is available as IEC 60691:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60691:2023 is applicable to thermal-links intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. NOTE 1 The equipment is not designed to generate heat. NOTE 2 The effectiveness of the protection against excessive temperatures logically depends upon the position and method of mounting of the thermal-link, as well as upon the current which it is carrying. This document may be applicable to thermal-links for use under conditions other than indoors, provided that the climatic and other circumstances in the immediate surroundings of such thermal-links are comparable with those in this standard. This document may be applicable to thermal-links in their simplest forms (e.g. melting strips or wires), provided that molten materials expelled during function cannot adversely interfere with the safe use of the equipment, especially in the case of hand-held or portable equipment, irrespective of its position.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60269-6:2011/A1:2023(Amendment)
Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
SIST EN 60269-6:2011/A1:2024

The contents of the corrigendum of November 2021 have been included in this copy.

  • Amendment
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-4-43:2023(Main)
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
SIST HD 60364-4-43:2023

IEC 60364-4-43:2023 provides requirements for: - protection of live conductors, PEN conductors, PEM conductors, and PEL conductors against the harmful effects caused by overcurrent; - coordination of measures for protection against overcurrent. This fourth edition cancels and replaces the third edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the standard has been restructured, see Table 1 (Correspondence between IEC 60364‑4‑43:2008 and this document) below; b) the measure "automatic disconnection of supply" has been designated as the preferred measure for protection against overcurrent; c) all measures except the measure "automatic disconnection of supply" have been transferred into new normative annexes to indicate that these measures are usable in certain applications and under certain restricted conditions only (see Annex A, Annex B and Annex E); d) a new clause "Terms and definitions" has been added; e) new requirements have been added for the protection of the neutral or mid-point conductor (with and without triplen harmonics).

  • Standardization document
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60127-2:2014/A1:2023(Amendment)
Miniature fuses - Part 2: Cartridge fuse-links
SIST EN 60127-2:2015/A1:2024

NEXT ACTION: HAS CONSULTANT ASSESSMENT BY 2020-01-29
2020-07-06 link to LVD added, asked SR for ZZ and ZA

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61543:2023/A11:2023(Amendment)
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
SIST EN IEC 61543:2023/A11:2023
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61543:2023(Main)
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
SIST EN IEC 61543:2023

This document provides specific emission and immunity requirements, tests and performance criteria for residual current-operated protective devices (RCDs), for household and similar use, for rated voltages not exceeding 440 V. Household and similar use corresponds to the description given in the generic standard IEC 61000-6-1 for residential, commercial, and light-industrial electromagnetic environments. This document is intended to be referred to by RCD product standards and is not intended to be used as a standalone document. Residual current-operated protective devices are: - Residual current operated circuit-breakers without integral overcurrent protection for household and similar use (RCCBs) covered by IEC 61008 series and IEC 62423; - Residual current operated circuit-breakers with integral overcurrent protection for household and similar use (RCBOs) covered by IEC 61009 series and IEC 62423; - Residual current devices with or without overcurrent protection for socket-outlets (SRCDs) covered by IEC 62640; - Portable residual current devices without integral overcurrent protection (PRCDs) covered by IEC 61540; - Devices with an RCD functionality for household and similar use according product standards following the group safety publications for general safety requirements for RCDs, IEC 60755. This edition applies if it is referred to as a dated reference in the relevant product standard. This document is also intended to be used as a guideline in the preparation of EMC requirements and tests for other product standards under the scope of SC 23E. It also specifies generic performance criteria intended to be transformed into specific performance criteria by the relevant product standard. Note: Examples of other product standards under the scope of SC 23E are: - IEC 62020-1 "Electrical accessories - Residual current monitors (RCMs) – Part 1: RCMs for household and similar uses"; - IEC 62606 "General requirements for arc fault detection devices"; - IEC 63024 "Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses"; - IEC 63052 "Power frequency overvoltage protective devices (POPs) for household and similar applications"; - IEC 62752 "In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)"; - IEC 62955 "Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles".

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60269-2:2013/A1:2022(Amendment)
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
SIST HD 60269-2:2013/A1:2023

IEC 60269-2:2013 provides supplementary requirements for fuses for use by authorized persons and are generally designed to be used in installations where the fuse-links are accessible to, and may be replaced by, authorized persons only. Fuses for use by authorized persons according to the following fuse systems also comply with the requirements of the corresponding subclauses of IEC 60269-1, unless otherwise defined in this standard. This standard is divided into fuse systems, each dealing with a specific example of standardized fuses for use by authorized persons: - Fuse system A: Fuses with fuse-links with blade contacts (NH fuse system), - Fuse system B: Fuses with striker fuse-links with blade contacts (NH fuse system), - Fuse system C: Fuse-rails (NH fuse system), - Fuse system D: Fuse-bases for busbar mounting (NH fuse system), - Fuse system E: Fuses with fuse-links for bolted connections (BS bolted fuse system), - Fuse system F: Fuses with fuse-links having cylindrical contact caps (NF cylindrical fuse system), - Fuse system G: Fuses with fuse-links with offset blade contacts (BS clip-in fuse system), - Fuse system H: Fuses with fuse-links having 'gD' and 'gN' characteristic (class J and class time delay and non time delay fuse types), - Fuse system I: gU fuse-links with wedge tightening contacts, - Fuse system J: Fuses with fuse-links having 'gD class CC' and 'gN class CC' characteristics (class CC time delay and non-time delay fuse types), - Fuse system K: gK fuse-links with blade for bolted connections - High fuse-link ratings from 1 250 A up to 4 800 A (master fuse-links). This fifth edition of IEC 60269-2 cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: 1. fuse systems A and B: modified values for the power dissipation of NH aM fuse-links; 2. fuse systems A and B: introduction of dimension r for NH fuse-links; 3. addition of new fuse system K: gK fuse-links with contacts for bolted connections. Key Words: fuse systems A to K, requirements for fuses

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60269-3:2010/A2:2022(Amendment)
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
SIST HD 60269-3:2010/A2:2023

2018-05-14 PC: TC to finalize the finalize Annex ZA, ZZ and Risk assessment

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62423:2012/A12:2022(Amendment)
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
SIST EN 62423:2013/A12:2023

The scope of EN 61008-1 and EN 61008-2-1 or EN 61009-1 and EN 61009-2-1 applies with the following additions. This standard specifies requirements and tests for Type F and Type B RCDs (Residual current devices). Requirements and tests given in this standard are in addition to the requirements of Type A residual current devices according to EN 61008-2-1 or EN 61009-2-1. This standard can only be used together with EN 61008-1 and EN 61009-1.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50122-3:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of AC and DC traction systems
SIST EN 50122-3:2022

This document specifies requirements for the protective provisions relating to electrical safety in fixed installations, when it is reasonably likely that hazardous voltages or currents will arise for people or equipment, as a result of the mutual interaction of AC and DC electric power supply traction systems. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric power supply traction systems. The mutual interaction can be of any of the following kinds: — parallel running of AC and DC electric traction power supply systems; — crossing of AC and DC electric traction power supply systems; — shared use of tracks, buildings or other structures; — system separation sections between AC and DC electric traction power supply systems. The scope is limited to galvanic, inductive and capacitive coupling of the fundamental frequency voltages and currents and their superposition. This document applies to all new lines, extensions and to all major revisions to existing lines for the following electric traction power supply systems: a) railways; b) guided mass transport systems such as: 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) magnetically levitated systems, which use a contact line system, 5) trolleybus systems, and 6) electric traction power supply systems for road vehicles, which use an overhead contact line system; c) material transportation systems. The document does not apply to: a) electric traction power supply systems in underground mines; b) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the electric traction power supply system for railways; c) suspended cable cars; d) funicular railways; e) procedures or rules for maintenance. The rules given in this document can also be applied to mutual interaction with non-electrified tracks, if hazardous voltages or currents can arise from AC or DC electric traction power supply systems.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day