EN 62343-4-1:2016

Dynamic modules - Part 4-1: Software and hardware interface - 1 x 9 wavelength selective switch

IEC 62343-4-1:2016(E) describes and provides specifications for a software and hardware interface for the 1 x 9 wavelength selective switch. These switches can be controlled by resident firmware with this interface. This standard addresses the configuration and function to control a WSS. This interface is intended to enable a user or host to retrieve the switch status and/or adjust relevant switch and attenuation settings. Keywords: wavelength selective switch (WSS), reconfigurable optical add drop multiplexer (ROADM), dense wavelength division multiplexing (DWDM)

Dynamische Module - Teil 4-1: Software- und Hardware- Schnittstelle - 1 x 9 wellenlängenselektiver Schalter

Modules dynamiques - Partie 4-1 : Interface logicielle et matérielle - Commutateur sélectif en longueur d'onde 1 x 9

IEC 62323-4-1:2016 décrit et fournit des spécifications d'une interface logicielle et matérielle pour le commutateur sélectif en longueur d'onde 1 x 9. Ces commutateurs peuvent être contrôlés par un micrologiciel résident et cette interface. La présente norme couvre la configuration et les fonctions permettant de contrôler un WSS. L'interface est destinée à permettre à un utilisateur ou à un hôte de récupérer l'état du commutateur et/ou de régler le commutateur en question et l'affaiblissement. Mots clés: Un commutateur sélectif en longueur d’onde (WWS), multiplexage optique d'insertion-extraction reconfigurable (ROADM), multiplexage par répartition en longueur d’onde à forte densité (DWDM)

Dinamični moduli - Programska in strojna oprema za vmesnike - 4-1. del: 1x9-valovnodolžinska selektivna stikala (IEC 62343-4-1:2016)

Ta del standarda IEC 62343 opisuje in podaja specifikacije za programsko in strojno opremo za vmesnike za 1x9-valovnodolžinska selektivna stikala.
Ta stikala je mogoče upravljati z vdelano programsko opremo s tem vmesnikom. Ta standard obravnava konfiguracijo in delovanje za upravljanje valovnodolžinskih selektivnih stikal. Ta vmesnik omogoča uporabniku ali gostitelju, da pridobi stanje stikala in/ali prilagodi ustrezno stikalo in nastavitve slabljenja.

General Information

• Status: Published
• Publication Date: 19-May-2016
• Withdrawal Date: 07-Apr-2019
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 20-May-2016
• Completion Date: 20-May-2016
• Ref Project: SIST EN 62343-4-1:2016 - Dynamic modules - Software and hardware interface standards - Part 4-1: 1x9 Wavelength selective switch (IEC 62343-4-1:2016)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62343-4-1:2016
01-julij-2016
'LQDPLþQLPRGXOL3URJUDPVNDLQVWURMQDRSUHPD]DYPHVQLNHGHO[
YDORYQRGROåLQVNDVHOHNWLYQDVWLNDOD,(&
Dynamic modules - Software and hardware interface standards - Part 4-1: 1x9
Wavelength selective switch (IEC 62343-4-1:2016)
Ta slovenski standard je istoveten z: EN 62343-4-1:2016
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62343-4-1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62343-4-1:2016

---------------------- Page: 2 ----------------------

SIST EN 62343-4-1:2016


EUROPEAN STANDARD EN 62343-4-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2016
ICS 33.180.20

English Version
Dynamic modules - Part 4-1: Software and hardware interface -
1 x 9 wavelength selective switch
(IEC 62343-4-1:2016)
Modules dynamiques - Partie 4-1 : Interface logicielle et Dynamische Module - Teil 4-1: Software und Hardware
matérielle - Commutateur sélectif en longueur d'onde 1 x 9 Schnittstelle - 1 x 9 Wellenlängenselektiver Schalter
(IEC 62343-4-1:2016) (IEC 62343-4-1:2016)
This European Standard was approved by CENELEC on 2016-04-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62343-4-1:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62343-4-1:2016
EN 62343-4-1:2016
European foreword
The text of document 86C/1304/CDV, future edition 1 of IEC 62343-4-1, prepared by
SC 86C “Fibre optic systems and active devices” of IEC/TC 86 “Fibre optics” was submitted
to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62343-4-1:2016.

The following dates are fixed:
• latest date by which the document has to be (dop) 2017-01-08
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-04-08
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62343-4-1:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :

IEC 62343-3-3 NOTE Harmonized as EN 62343-3-3.
2

---------------------- Page: 4 ----------------------

SIST EN 62343-4-1:2016
EN 62343-4-1:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 60050-731 -  Inte
...