EN 62343-3-3:2014

Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches

IEC 62343-3-3:2014 provides a performance specification template for wavelength selective switches. The object is to provide a framework for the preparation of detail specifications on the performance of wavelength selective switches. Additional specification parameters may be included for detailed product specifications or performance specifications. However, specification parameters specified in this standard shall not be removed from the detail product specifications or performance specifications. The technical information regarding wavelength selective switches, and their applications in DWDM systems will be described in IEC TR 62343-6-4, currently under consideration. Keywords: performance specification template for wavelength selective switches

Dynamische Module - Teil 3-3: Vorlagen für Leistungsspezifikationen - Wellenlängen-Wählschalter

Modules dynamiques - Partie 3-3: Modèles de spécification de performance - Commutateurs sélectifs en longueur d'onde

L'IEC 62343-3-3:2014 présente un modèle de spécification de performance pour les commutateurs sélectifs en longueur d'onde. Il est destiné à fournir un cadre pour la préparation de spécifications particulières applicables aux commutateurs sélectifs en longueur d'onde et à leurs performances. Des paramètres de spécification supplémentaires peuvent être inclus pour les spécifications détaillées de produit ou de performances. Toutefois, les paramètres de spécification stipulés dans la présente norme ne doivent pas être retirés des spécifications particulières de produit ou de performances. Les informations techniques concernant les commutateurs sélectifs en longueur d'onde et leurs applications dans les systèmes DWDM seront décrites dans l'IEC TR 62343-6-4, actuellement à l'étude. Mots clés: spécification de performance pour les commutateurs sélectifs en longueur d'onde

Dinamični moduli - Predloge za tehnične specifikacije - 3-3. del: Valovnodolžinska selektivna stikala (IEC 62343-3-3:2014)

Standard EN IEC 62343-3-3 zagotavlja predloge za tehnične specifikacije za valovnodolžinska selektivna stikala. Namen je zagotoviti ogrodje za pripravo podrobnih specifikacij o delovanju valovnodolžinskih selektivnih stikal. Vključeni so lahko dodatni specifikacijski parametri, da se omogoči podrobne specifikacije proizvodov ali delovanja. Specifikacijskih parametrov iz tega standarda se ne sme odstraniti iz podrobnih specifikacij proizvoda ali delovanja. Te tehnične informacije o valovnodolžinskih selektivnih stikalih in njihovih uporabah v sistemih DWDM bodo opisane v standardu IEC TR 62343-6-4, ki je trenutno še v obravnavi.

General Information

• Status: Withdrawn
• Publication Date: 03-Jul-2014
• Withdrawal Date: 09-Jun-2017
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-May-2023
• Completion Date: 14-May-2023
• Ref Project: SIST EN 62343-3-3:2014 - Dynamic modules - Performance specification templates - Part 3-3: Wavelength selective switches

Relations

• Replaced By: EN IEC 62343-3-3:2020 - Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
• Effective Date: 01-May-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62343-3-3:2014
01-september-2014
'LQDPLþQLPRGXOL3UHGORJH]DWHKQLþQHVSHFLILNDFLMHGHO9DORYQRGROåLQVND
VHOHNWLYQDVWLNDOD,(&
Dynamic modules - Performance specification templates - Part 3-3: Wavelength selective
switches
Modules dynamiques - Modèles de spécification de performance - Partie 3-3:
Commutateurs sélectifs en longueur d'onde
Ta slovenski standard je istoveten z: EN 62343-3-3:2014
ICS:
31.220.20 Stikala Switches
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
SIST EN 62343-3-3:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62343-3-3:2014

---------------------- Page: 2 ----------------------

SIST EN 62343-3-3:2014


EUROPEAN STANDARD EN 62343-3-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 33.180.20

English Version
Dynamic modules - Part 3-3: Performance specification
templates - Wavelength selective switches
(IEC 62343-3-3:2014)
Modules dynamiques - Partie 3-3: Modèles de spécification Dynamische Module - Vorlagen für Leistungsspezifikationen
de performance - Commutateurs sélectifs en longueur - Teil 3-3: Wellenlängen-Wählschalter
d'onde (IEC 62343-3-3:2014)
(CEI 62343-3-3:2014)
This European Standard was approved by CENELEC on 2014-06-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62343-3-3:2014 E

---------------------- Page: 3 ----------------------

SIST EN 62343-3-3:2014
EN 62343-3-3:2014 - 2 -
Foreword
The text of document 86C/1156/CDV, future edition 1 of IEC 62343-3-3, prepared by SC 86C "Fibre
optic systems and active devices” of IEC/TC 86 “Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 62343-3-3:2014.

The following dates are fixed:
(dop) 2015-03-10
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-06-10
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62343-3-3:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60793-2-50 NOTE Harmonized as EN 60793-2-50.
IEC 60869-1 NOTE Harmonized as EN 60869-1.
IEC 60876-1 NOTE Harmonized as EN 60876-1.
IEC 61300 Series NOTE Harmonized as EN 61300 Series (partially modified).
IEC 61300-3-4 NOTE Harmonized as EN 61300-3-4.
IEC 61300-3-20 NOTE Harmonized as EN 61300-3-20.
IEC 61753-1 NOTE Harmonized as EN 61753-1.
IEC 61753-081-2 NOTE Harmonized as EN 61753-081-2.
IEC 61754 Series NOTE Harmonized as EN 61754 Series (partially modified).
IEC 61978-1 NOTE Harmonized as EN 61978-1.

---------------------- Page: 4 ----------------------

SIST EN 62343-3-3:2014
- 3 - EN 62343-3-3:2014
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the editi
...