EN 62453-2:2009

Field device tool (FDT) interface specification - Part 2: Concepts and detailed description

IEC 62453-2:2009(E) explains the common principles of the field device tool concept. These principles can be used in various industrial applications such as engineering systems, configuration programs and monitoring and diagnostic applications. It specifies the general objects, general object behavior and general object interactions that provide the base of FDT.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 2: Konzept und grundlegende Beschreibung

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 2: Concepts et description détaillée

L'IEC 62453-2:2009 explique les principes courants du concept de l'outil des dispositifs de terrain. Ces principes peuvent être utilisés dans diverses applications industrielles telles que les systèmes d'ingénierie, les programmes de configuration et les applications de surveillance et de diagnostic. La présente norme spécifie les objets généraux, leur comportement ainsi que les interactions entre eux qui fournit la base du FDT. La présente version bilingue (2014-04) correspond à la version anglaise monolingue publiée en 2009-06.

Specifikacija vmesnika orodja procesne naprave - 2. del: Osnutki in podrobna razlaga (IEC 62453-2:2009)

Ta del IEC 62453 razloži skupna načela osnutka orodja procesne naprave. Ta načela se lahko uporabljajo v različnih industrijskih aplikacijah, kot so strojni sistemi, konfiguracijski programi, aplikacije za spremljanje in diagnostične aplikacije. Ta standard opredeljuje splošne objekte, splošno vedenje objekta in splošne interakcije objekta, ki zagotavljajo osnovo  orodja procesne naprave.

General Information

• Status: Withdrawn
• Publication Date: 14-Oct-2009
• Withdrawal Date: 31-Jul-2012
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• ICS: 35.110 - Networking
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Parallel Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Jan-2020
• Completion Date: 20-Jan-2020
• Ref Project: SIST EN 62453-2:2010 - Field device tool interface specification -- Part 2: Concepts and detailed description

Relations

• Replaced By: EN 62453-2:2017 - Field Device Tool (FDT) Interface Specification - Part 2: Concepts and detailed Description
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62453-2:2010
01-januar-2010
Specifikacija vmesnika orodja procesne naprave - 2. del: Osnutki in podrobna
razlaga (IEC 62453-2:2009)
Field device tool interface specification -- Part 2: Concepts and detailed description
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 2: Konzept und grundlegende
Beschreibung
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 2:
Concepts et description détaillée
Ta slovenski standard je istoveten z: EN 62453-2:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-2:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62453-2:2010

---------------------- Page: 2 ----------------------

SIST EN 62453-2:2010


EUROPEAN STANDARD
EN 62453-2

NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.05; 35.110



English version


Field device tool (FDT) interface specification -
Part 2: Concepts and detailed description
(IEC 62453-2:2009)



Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 2: Concepts et description détaillée Teil 2: Konzept
(CEI 62453-2:2009) und grundlegende Beschreibung
(IEC 62453-2:2009)




This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62453-2:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62453-2:2010
EN 62453-2:2009 - 2 -
Foreword
The text of document 65E/124/FDIS, future edition 1 of IEC 62453-2, prepared by SC 65E, Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-2 on
2009-08-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62453-2:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 62453-2:2010
- 3 - EN 62453-2:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 61131 Series Programmable controllers EN 61131 Series


IEC/TR 62390 2005 Common automation device - – –
Profile guideline


IEC 62453-1 2009 Field device tool (FDT) interface specification - EN 62453-1 2009
Part 1: Overview and guidance


IEC 62453-3xy Series Field device tool (FDT) interface specification - EN 62453-3xy Series
...