EN IEC 63171-1:2020
(Main)Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style
Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style
IEC 63171-1:2020 covers two-way, shielded or unshielded, free and fixed connectors for data transmission with frequencies up to 600 MHz and with current carrying capacity up to 2,0 A at 60 °C. It is intended to specify the common dimensions, mechanical, electrical, signal integrity, environmental characteristics, reliability specifications and corresponding tests for these connectors.
Steckverbinder für elektrische und elektronische Einrichtungen - Teil 1: Bauartspezifikation für geschirmte oder ungeschirmte freie und feste Steckverbinder, 2-polig - Mechanische Steckungsinformationen, Pinbelegung und zusätzliche Anforderungen für Typ 1 / Kupfer LC Bauform
Connecteurs pour équipements électriques et électroniques - Partie 1: Spécification particulière pour les fiches et les embases bidirectionnelles, écrantées ou non écrantées - Informations sur l’accouplement mécanique, brochage et exigences supplémentaires pour connecteur LC de type 1 à doigts de guidage en cuivre
63171-1:2020 couvre les fiches et embases bidirectionnelles, écrantées ou non écrantées, assurant la transmission de données à des fréquences pouvant atteindre 600 MHz et à un courant admissible pouvant atteindre 2,0 A à 60 °C. Elle vise à spécifier les dimensions communes, les caractéristiques mécaniques, électriques, d’intégrité du signal et d’environnement, les spécifications de fiabilité et les essais correspondants pour ces connecteurs.
Konektorji za električno in elektronsko opremo - 1. del: Podrobne specifikacije za dvopolne, zaslonjene ali nezaslonjene, proste ali pritrjene konektorje - Informacije o mehanskih prilagoditvah, funkcije polov in dodatne zahteve za tip 1, iz bakra, vrsta LC (IEC 63171-1:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2020
Konektorji za električno in elektronsko opremo - 1. del: Podrobne specifikacije za
dvopolne, zaslonjene ali nezaslonjene, proste ali pritrjene konektorje - Informacije
o mehanskih prilagoditvah, funkcije polov in dodatne zahteve za tip 1, iz bakra,
vrsta LC (IEC 63171-1:2020)
Connectors for electrical and electronic equipment - Part 1: Detail specification for two-
way, shielded or unshielded, free and fixed connectors - Mechanical mating information,
pin assignment and additional requirements for Type 1 copper LC style (IEC 63171-
1:2020)
Connecteurs pour équipements électriques et électroniques - Partie 1: Spécification
particulière pour les fiches et les embases bidirectionnelles, écrantées ou non écrantées
- Informations sur l’accouplement mécanique, brochage et exigences supplémentaires
pour connecteur LC de type 1 à doigts de guidage en cuivre (IEC 63171-1:2020)
Ta slovenski standard je istoveten z: EN IEC 63171-1:2020
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 63171-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 31.220.10
English Version
Connectors for electrical and electronic equipment - Part 1:
Detail specification for two-way, shielded or unshielded, free and
fixed connectors - Mechanical mating information, pin
assignment and additional requirements for Type 1 copper LC
style
(IEC 63171-1:2020)
Connecteurs pour équipements électriques et électroniques Steckverbinder für elektrische und elektronische
- Partie 1: Spécification particulière pour les fiches et les Einrichtungen - Teil 1: Bauartspezifikation für geschirmte
embases bidirectionnelles, écrantées ou non écrantées - oder ungeschirmte freie und feste Steckverbinder, 2-polig:
Informations sur l'accouplement mécanique, brochage et mechanische Steckungsinformationen, Pinbelegung und
exigences supplémentaires pour connecteur LC de type 1 à zusätzliche Anforderungen für Typ 1 / Kupfer LC Bauform
doigts de guidage en cuivre (IEC 63171-1:2020)
(IEC 63171-1:2020)
This European Standard was approved by CENELEC on 2020-05-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63171-1:2020 E
European foreword
The text of document 48B/2783/FDIS, future edition 1 of IEC 63171-1, prepared by SC 48B "Electrical
connectors" of IEC/TC 48 "Electrical connectors and mechanical structures for electrical and electronic
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63171-1:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-14 NOTE Harmonized as EN 60068-2-14
IEC 60068-2-38 NOTE Harmonized as EN 60068-2-38
IEC 60512-9-2 NOTE Harmonized as EN 60512-9-2
IEC 60512-11-3 NOTE Harmonized as EN 60512-11-3
IEC 60512-11-9 NOTE Harmonized as EN 60512-11-9
IEC 60603-7 NOTE Harmonized as EN 60603-7
IEC 61754-20 NOTE Harmonized as EN 61754-20
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-581 - International Electrotechnical Vocabulary - - -
Part 581: Electromechanical components
for electronic equipment
IEC 60068-1 - Environmental testing - Part 1: General and EN 60068-1 -
guidance
IEC 60512-1 - Connectors for electrical and electronic EN IEC 60512-1 -
equipment - Tests and measurements - Part
1: Generic specification
IEC 60512-1-1 - Connectors for electronic equipment - Tests EN 60512-1-1 -
and measurements - Part 1-1: General
examination - Test 1a: Visual examination
IEC 60512-1-2 - Connectors for electronic equipment - Tests EN 60512-1-2 -
and measurements - Part 1-2: General
examination - Test 1b: Examination of
dimension and mass
IEC 60512-2-1 - Connectors for electronic equipment - Tests EN 60512-2-1 -
and measurements - Part 2-1: Electrical
continuity and contact resistance tests -
Test 2a: Contact resistance - Millivolt level
method
IEC 60512-2-5 - Connectors for electronic equipment - Tests EN 60512-2-5 -
and measurements - Part 2-5: Electrical
continuity and contact resistance tests -
Test 2e: Contact disturbance
IEC 60512-3-1 - Connectors for electronic equipment - Tests EN 60512-3-1 -
and measurements - Part 3-1: Insulation
tests - Test 3a: Insulation resistance
Publication Year Title EN/HD Year
IEC 60512-4-1 - Connectors for electronic equipment - Tests EN 60512-4-1 -
and measurements - Part 4-1: Voltage
stress tests - Test 4a: Voltage proof
IEC 60512-5-2 - Connectors for electronic equipment - Tests EN 60512-5-2 -
and measurements - Part 5-2: Current-
carrying capacity tests - Test 5b: Current-
temperature derating
IEC 60512-6-4 - Connectors for electronic equipment - Tests EN 60512-6-4 -
and measurements - Part 6-4: Dynamic
stress tests - Test 6d: Vibration (sinusoidal)
IEC 60512-9-1 - Connectors for electronic equipment - Tests EN 60512-9-1 -
and measurements - Part 9-1: Endurance
tests - Test 9a: Mechanical operation
IEC 60512-11-7 - Connectors for electronic equipment - Tests EN 60512-11-7 -
and measurements - Part 11-7: Climatic
tests - Test 11g: Flowing mixed gas
corrosion test
IEC 60512-11-12 - Connectors for electronic equipment - Tests EN 60512-11-12 -
and measurements - Part 11-12: Climatic
tests - Test 11m: Damp heat, cyclic
IEC 60512-13-2 - Connectors for electronic equipment - Tests EN 60512-13-2 -
and measurements - Part 13-2: Mechanical
operation tests - Test 13b: Insertion and
withdrawal forces
IEC 60512-15-6 - Connectors for electronic equipment - Tests EN 60512-15-6 -
and measurements - Part 15-6: Connector
tests (mechanical) - Test 15f: Effectiveness
of connector coupling devices
IEC 60512-25-9 - Connectors for electronic equipment - Tests EN 60512-25-9 -
and measurements - Part 25-9: Signal
integrity tests - Test 25i: Alien crosstalk
IEC 60512-26-100 - Connectors for electronic equipment - Tests EN 60512-26-100 -
and measurements - Part 26-100:
Measurement setup, test and reference
arrangements and measurements for
connectors according to IEC 60603-7 -
Tests 26a to 26g
IEC 60512-28-100 - Connectors for electrical and electronic EN IEC 60512-28- -
equipment - Tests and measurements - Part 100
28-100: Signal integrity tests up to 2 000
MHz - Tests 28a to 28g
IEC 60664-1 - Insulation coordination for equipment within EN 60664-1 -
low-voltage systems - Part 1: Principles,
requirements and tests
Publication Year Title EN/HD Year
IEC 62153-4-12 - Metallic communication cable test methods - -
- Part 4-12: Electromagnetic compatibility
(EMC) - Coupling attenuation or screening
attenuation of connecting hardware -
Absorbing clamp method
IEC 62153-4-15 - Metallic cables and other passive - -
components test methods - Part 4-15:
Electromagnetic compatibility (EMC) - Test
method for measuring transfer impedance
and screening attenuation - or coupling
attenuation with triaxial cell
ISO/IEC 11801-1 - Information technology - Generic cabling for - -
customer premises - Part 1: General
requirements
IEC 63171-1 ®
Edition 1.0 2020-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electrical and electronic equipment –
Part 1: Detail specification for two-way, shielded or unshielded, free and fixed
connectors – Mechanical mating information, pin assignment and additional
requirements for Type 1 copper LC style
Connecteurs pour équipements électriques et électroniques –
Partie 1: Spécification particulière pour les fiches et les embases
bidirectionnelles, écrantées ou non écrantées – Informations sur l’accouplement
mécanique, brochage et exigences supplémentaires pour connecteur LC de type
1 à doigts de guidage en cuivre
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.220.10 ISBN 978-2-8322-8076-8
– 2 – IEC 63171-1:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 Technical information . 10
4.1 Compatibility level – Interoperability . 10
4.2 Unshielded connectors . 10
4.3 Use of UTP cable . 10
5 Common features and typical connector pair . 10
5.1 Mating information . 10
5.1.1 General . 10
5.1.2 Contacts – Mating conditions . 11
5.1.3 Fixed connector . 12
5.1.4 Free connector . 15
6 Characteristics . 16
6.1 General . 16
6.2 Classification into climatic category . 16
6.3 Electrical characteristics . 17
6.3.1 General . 17
6.3.2 Creepage and clearance distances . 17
6.3.3 Contact resistance – Interface only (separable fixed and free contact) . 17
6.3.4 Input to output DC resistance . 18
6.3.5
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.