EN 60335-2-108:2008
(Main)Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers
Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers
Deals with the safety of electrolysers that produce low viscosity, ionized liquids intended for use as detergent free wash water in appliances for household and similar purposes and which conform with the standards applicable to such appliances. It applies to electrolysers tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this standard be adopted for implementation nationally not earlier than 12 months from the date of its publication.
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-108: Besondere Anforderungen für Elektrolysatoren
Appareils électrodomestiques et analogues - Sécurité - Partie 2-108: Règles particulières pour les électrolyseurs
Traite de la sécurité des électrolyseurs qui produisent des liquides ionisés à faible viscosité destinés à être utilisés comme eau de lavage sans détergent dans les appareils à usages domestiques et analogues et qui sont conformes aux normes applicables à de tels appareils. Elle s'applique aux électrolyseurs essayés séparément, dans les conditions les plus sévères qui peuvent se produire en usage normal, et dont la tension assignée n'est pas supérieure à 250 V. L'attention des Comités Nationaux est attirée sur le fait que les fabricants d'appareils et les organismes d'essai peuvent avoir besoin d'une période transitoire après la publication d'une nouvelle publication CEI, ou d'une publication amendée ou révisée, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs équipements aux nouveaux essais ou aux essais révisés. Le comité recommande que le contenu de la présente norme soit entériné au niveau national au plus tôt 12 mois après sa date de publication.
Gospodinjski in podobni električni aparati - Varnost - 2-108. del: Posebne zahteve za elektrolizatorje (IEC 60335-2-108:2008, spremenjen)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2008
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVWGHO3RVHEQH]DKWHYH
]DHOHNWUROL]DWRUMH,(&VSUHPHQMHQ
Household and similar electrical appliances - Safety - Part 2-108: Particular requirements
for electrolysers
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-108:
Besondere Anforderungen für Elektrolysatoren
Appareils électrodomestiques et analogues - Sécurité - Partie 2-108: Règles particulières
pour les électrolyseurs
Ta slovenski standard je istoveten z: EN 60335-2-108:2008
ICS:
13.120 Varnost na domu Domestic safety
97.060 Aparati za nego perila Laundry appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60335-2-108
NORME EUROPÉENNE
July 2008
EUROPÄISCHE NORM
ICS 13.120; 97.060
English version
Household and similar electrical appliances -
Safety -
Part 2-108: Particular requirements for electrolysers
(IEC 60335-2-108:2008, modified)
Appareils électrodomestiques Sicherheit elektrischer Geräte
et analogues - für den Hausgebrauch
Sécurité - und ähnliche Zwecke -
Partie 2-108: Règles particulières Teil 2-108: Besondere Anforderungen
pour les électrolyseurs für Elektrolysatoren
(CEI 60335-2-108:2008, modifiée) (IEC 60335-2-108:2008, modifiziert)
This European Standard was approved by CENELEC on 2008-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60335-2-108:2008 E
Foreword
The text of document 61/3413/FDIS, future edition 1 of IEC 60335-2-108, prepared by IEC Technical
Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 60335-2-108 on 2008-05-01 with a common
modification maintaining the coherence with Clause 6 of EN 60335-1:2002.
The following dates are applicable:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2009-02-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-05-01
with the EN have to be withdrawn
This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances –
Safety – Part 1: General requirements. It was established on the basis of the 2002 edition of that
standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when
such changes become applicable will be stated in the relevant amendment of revision of Part 1.
This part 2 supplements or modifies the corresponding clauses in EN 60335-1, so as to convert it into the
European Standard: Safety requirements for electrical electrolysers.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is
reasonable. When this standard states "addition", "modification" or "replacement", the relevant text in
Part 1 is to be adapted accordingly.
NOTE 1 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a
replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
– subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.
NOTE 2 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun
are also in bold.
There are no special national conditions causing a deviation from this European Standard, other than
those listed in Annex ZA to EN 60335-1.
There are no national deviations from this European Standard, other than those listed in Annex ZB to
EN 60335-1.
p NOTE In this document, p is used in the margin to indicate instructions for preparing the printed version.
__________
- 3 - EN 60335-2-108:2008
Introduction
p Add:
An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this
standard are fully covered by the Low Voltage Directive, 2006/95/EC. For products having mechanical
moving parts, a risk assessment in accordance with the Machinery Directive, 2006/42/EC, has shown that
the risks are mainly of electrical origin and consequently this directive is not applicable. However, the
relevant essential safety requirements of the Machinery Directive are covered by this standard together
with the principal objectives of the Low Voltage Directive.
____________
Endorsement notice
The text of the International Standard IEC 60335-2-108:2008 was approved by CENELEC as a European
Standard with agreed common modification as given below.
COMMON MODIFICATIONS
6 Classification
p Delete the second sentence of the modification.
____________
Bibliography
p Add the following notes to the standards mentioned:
IEC 60335-2-5 NOTE Harmonized as EN 60335-2-5:2003 (modified).
IEC 60335-2-7 NOTE Harmonized as EN 60335-2-7:2003 (modified).
ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified).
____________
p Add:
Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-52 - Environmental testing - EN 60068-2-52 1996
Part 2: Tests - Test Kb: Salt mist, cyclic
(sodium chloride solution)
IEC 60079-15 2005 Electrical apparatus for explosive gas EN 60079-15 2005
atmospheres -
Part 15: Construction, test and marking of
type of protection "n" electrical apparatus
ISO 1817 2005 Rubber, vulcanized - Determination of the - -
effect of liquids
____________
1)
Undated reference.
2)
Valid edition at date of issue.
IEC 60335-2-108
Edition 1.0 2008-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-108: Particular requirements for electrolysers
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-108: Règles particulières pour les électrolyseurs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
P
CODE PRIX
ICS 13.120; 97.060 ISBN 2-8318-9530-8
– 2 – 60335-2-108 © IEC:2008
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Definitions .7
4 General requirement.7
5 General conditions for the tests .7
6 Classification.7
7 Marking and instructions.7
8 Protection against access to live parts.8
9 Starting of motor-operated appliances .8
10 Power input and current .8
11 Heating .8
12 Void.8
13 Leakage current and electric strength at operating temperature.8
14 Transient overvoltages .8
15 Moisture resistance .8
16 Leakage current and electric strength.9
17 Overload protection of transformers and associated circuits .9
18 Endurance.9
19 Abnormal operation .9
20 Stability and mechanical hazards .9
21 Mechanical strength .9
22 Construction .9
23 Internal wiring.10
24 Components .10
25 Supply connection and external flexible cords .10
26 Terminals for external conductors.10
27 Provision for earthing .11
28 Screws and connections .11
29 Clearances, creepage distances and solid insulation .11
30 Resistance to heat and fire.11
31 Resistance to rusting.11
32 Radiation, toxicity and similar hazards.11
Bibliography.15
Annex AA (normative) Ageing test for elastomeric parts.12
Annex BB (informative) Guide for additional requirements to be considered for
inclusion in the end product standards for appliances that incorporate electrolysers .14
60335-2-108 © IEC:2008 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-108: Particular requirements for electrolysers
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.