Power sources for a wireless communication device - Part 1: General requirements of power modules

IEC 62952-1:2016 specifies the general requirements of power modules for wireless communication devices (WCD). This document includes additional optional specifications to permit use in explosive atmospheres and harsh environments. This International Standard is based on VDI/VDE 2185 Blatt 3.

Energiequellen für ein Funkkommunikationsgerät - Teil 1: Allgemeine Anforderungen an Energiemodule

Sources d'énergie pour un appareil de communication sans fil - Partie 1: Exigences générales relatives aux modules d'alimentation

L'IEC 62952-1:2016 spécifie les exigences générales relatives aux modules d'alimentation pour les appareils de communication sans fil (WCD). Cette IS inclut des spécifications facultatives supplémentaires permettant l'utilisation dans les atmosphères explosives et les environnements défavorables. La présente Norme internationale est basée sur la norme VDI/VDE 2185 Blatt 3.

Viri napajanja brezžične komunikacijske naprave - 1. del: Splošne zahteve za napajalne module (IEC 62952-1:2016)

Ta del standarda IEC 62952 določa splošne zahteve za napajalne module za brezžične komunikacijske naprave (WCD). Ta dokument zajema dodatne izbirne specifikacije, ki dovoljujejo uporabo v eksplozivnih atmosferah in okoljih z ostrimi pogoji.
Ta dokument določa uporabnost v življenjskem ciklu napajalnega modula, vključno z zamenjavo v eksplozivni atmosferi. Baterije, ki jih ni mogoče zamenjati, kot so baterije za varnostno kopiranje, ne spadajo na področje uporabe tega standarda.
Dodatne baterije ali napajalni moduli so zajeti v tem dokumentu, vendar metoda polnjenja ne spada na področje uporabe tega standarda.

General Information

Status
Published
Publication Date
01-Dec-2016
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available
Due Date
02-Dec-2016
Completion Date
02-Dec-2016

Buy Standard

Standard
EN 62952-1:2017 - BARVE na PDF-str 14
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 62952-1:2017
01-september-2017
9LULQDSDMDQMDEUH]åLþQHNRPXQLNDFLMVNHQDSUDYHGHO6SORãQH]DKWHYH]D
QDSDMDOQHPRGXOH ,(&

Power sources for a wireless communication device - Part 1: General requirements of

power modules (IEC 62952-1:2016)

Energiequellen für ein Funkkommunikationsgerät - Teil 1: Allgemeine Anforderungen an

Energiemodule (IEC 62952-1:2016)

Sources d'énergie pour un appareil de communication sans fil - Partie 1: Exigences

générales relatives aux modules d'alimentation (IEC 62952-1:2016)
Ta slovenski standard je istoveten z: EN 62952-1:2016
ICS:
29.220.10 3ULPDUQLþOHQLLQEDWHULMH Primary cells and batteries
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
SIST EN 62952-1:2017 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62952-1:2017
---------------------- Page: 2 ----------------------
SIST EN 62952-1:2017
EUROPEAN STANDARD EN 62952-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2016
ICS 29.220.10; 33.040.40
English Version
Power sources for a wireless communication device - Part 1:
General requirements of power modules
(IEC 62952-1:2016)

Sources d'énergie pour un appareil de communication sans Energiequellen für ein Funkkommunikationsgerät - Teil 1:

fil - Partie 1: Exigences générales relatives aux modules Allgemeine Anforderungen an Energiemodule

d'alimentation (IEC 62952-1:2016)
(IEC 62952-1:2016)

This European Standard was approved by CENELEC on 2016-11-09. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62952-1:2016 E
---------------------- Page: 3 ----------------------
SIST EN 62952-1:2017
EN 62952-1:2016
European foreword

The text of document 65B/1053/FDIS, future edition 1 of IEC 62952-1, prepared by SC 65B

“Measurement and control devices” of IEC/TC 65 “Industrial process measurement, control and

automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as

EN 62952-1:2016.
The following dates are fixed:
• latest date by which the document has to be (dop) 2017-08-09
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-11-09
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such

patent rights.
Endorsement notice

The text of the International Standard IEC 62952-1:2016 was approved by CENELEC as a European

Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60086-2 NOTE Harmonized as EN 60086-2.
---------------------- Page: 4 ----------------------
SIST EN 62952-1:2017
EN 62952-1:2016
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60079-0 (mod) 2011 Explosive atmospheres -- Part 0: EN 60079-0 2012
Equipment - General requirements
- - + A11 2013
IEC 60079-11 2011 Explosive atmospheres -- Part 11: EN 60079-11 2012
Equipment protection by intrinsic safety "i"
IEC 60086-1 - Primary batteries - Part 1: General EN 60086-1 -
IEC 60654-3 - Operating conditions for industrial-process EN 60654-3 -
measurement and control equipment --
Part 3: Mechanical influences

IEC 60721-3-4 1995 Classification of environmental conditions - EN 60721-3-4 1995

- Part 3: Classification of groups of
environmental parameters and their
severities -- Section 4: Stationary use at
non-weatherprotected locations
IEC 61326 series Electrical equipment for measurement, - series
control and laboratory use - EMC
requirements
IEC 62952-2 2016 Power sources for a wireless - -
communication device - Part 2: profile for
power modules with batteriess
IEC 62952-3 - Power sources for a wireless - -
communication device - Part 3: Energy
harvesting specification
---------------------- Page: 5 ----------------------
SIST EN 62952-1:2017
---------------------- Page: 6 ----------------------
SIST EN 62952-1:2017
IEC 62952-1
Edition 1.0 2016-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Power sources for a wireless communication device –
Part 1: General requirements of power modules
Sources d’énergie pour un appareil de communication sans fil –
Partie 1: Exigences générales relatives aux modules d'alimentation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.10; 33.040.40 ISBN 978-2-8322-3638-3

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62952-1:2017
– 2 – IEC 62952-1:2016  IEC 2016
CONTENTS

FOREWORD ......................................................................................................................... 3

INTRODUCTION ................................................................................................................... 5

1 Scope ............................................................................................................................ 6

2 Normative references..................................................................................................... 6

3 Terms, definitions, abbreviated terms, acronyms and conventions .................................. 7

3.1 Terms and definitions ............................................................................................ 7

3.2 Abbreviated terms and acronyms ........................................................................... 7

3.3 Convention for capitalizations ................................................................................ 8

4 General requirements .................................................................................................... 8

4.1 General ................................................................................................................. 8

4.2 Compliance ........................................................................................................... 9

4.3 Design ................................................................................................................ 10

4.4 Logistics ............................................................................................................. 10

4.4.1 Storage and marking .................................................................................... 10

4.4.2 Maintenance ................................................................................................ 10

4.4.3 Transportation in a plant .............................................................................. 10

4.4.4 Disposal ...................................................................................................... 10

4.5 Protection for explosive atmospheres .................................................................. 10

4.5.1 General ....................................................................................................... 10

4.5.2 Transportation and replacement ................................................................... 10

4.5.3 Battery requirements .................................................................................... 11

4.5.4 Temperature ................................................................................................ 11

4.5.5 Air pressure ................................................................................................. 11

4.6 Harsh environment .............................................................................................. 11

4.6.1 General ....................................................................................................... 11

4.6.2 Vibration and shock ..................................................................................... 11

4.6.3 Humidity ...................................................................................................... 11

4.6.4 Temperature ................................................................................................ 12

4.6.5 Corrosive environment ................................................................................. 12

4.6.6 Air pressure ................................................................................................. 12

4.7 Interchangeability ................................................................................................ 12

4.7.1 General ....................................................................................................... 12

4.7.2 Electrical interface ....................................................................................... 12

4.7.3 Mechanical interface .................................................................................... 13

4.8 Electrical parameters .......................................................................................... 13

Bibliography ....................................................................................................................... 14

Figure 1 – Various power sources applicable for a wireless communication device ................. 8

Table 1 ‒ Example of an implementation conformance statement ........................................... 9

---------------------- Page: 8 ----------------------
SIST EN 62952-1:2017
IEC 62952-1:2016  IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE –
Part 1: General requirements of power modules
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62952-1 has been prepared by subcommittee 65B: Measurement

and control devices, of IEC technical committee 65: Industrial-process measurement, control

and automation.
This International Standard is based on VDI/VDE 2185 Blatt 3.
The text of this standard is based on the following documents:
FDIS Report on voting
65B/1053/FDIS 65B/1056/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

A list of all parts of the IEC 62952 series, published under the general title Power source for a

wireless communication device, can be found on the IEC website.
---------------------- Page: 9 ----------------------
SIST EN 62952-1:2017
– 4 – IEC 62952-1:2016  IEC 2016

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates

that it contains colours which are considered to be useful for the correct

understanding of its contents. Users should therefore print this document using a

colour printer.
---------------------- Page: 10 ----------------------
SIST EN 62952-1:2017
IEC 62952-1:2016  IEC 2016 – 5 –
INTRODUCTION

Industrial wireless communication network devices like a pressure transmitter or a valve

positioner are mostly using non-copper-cable power sources. These devices are using a

power module for their power source that can contain a ba
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.