29.220.10 - Primary cells and batteries

TAN - // IEC Corrigendum

EN-IEC 60086-6 applies to all chemistries of portable primary cells and batteriesstandardized in the 60086 series.The purpose of this document is to provide guidance on the proper scientific protocols fortesting the environmental performance of batteries; the symbols used to convey messages forcollection, recycling, or other ideas; and the aspects and functional unit(s) to be included inassessing the environmental impact of batteries with modern life-cycle analysis techniques.

IEC 60086-6:2020 applies to all chemistries of portable primary cells and batteries standardized in the 60086 series. The purpose of this document is to provide guidance on the proper scientific protocols for testing the environmental performance of batteries; the symbols used to convey messages for collection, recycling, or other ideas; and the aspects and functional unit(s) to be included in assessing the environmental impact of batteries with modern life-cycle analysis techniques

IEC 60086-6:2020 applies to all chemistries of portable primary cells and batteries standardized in the 60086 series.
The purpose of this document is to provide guidance on the proper scientific protocols for testing the environmental performance of batteries; the symbols used to convey messages for collection, recycling, or other ideas; and the aspects and functional unit(s) to be included in assessing the environmental impact of batteries with modern life-cycle analysis techniques

This part of IEC 60086 specifies tests and requirements for primary lithium batteries to ensure
their safe operation under intended use and reasonably foreseeable misuse.
NOTE Primary lithium batteries that are standardized in IEC 60086-2 are expected to meet all applicable
requirements herein. It is understood that consideration of this part of IEC 60086 might also be given to measuring
and/or ensuring the safety of non-standardized primary lithium batteries. In either case, no claim or war...view more

This part of IEC 60086 specifies tests and requirements for primary lithium batteries to ensure
their safe operation under intended use and reasonably foreseeable misuse.
NOTE Primary lithium batteries that are standardized in IEC 60086-2 are expected to meet all applicable
requirements herein. It is understood that consideration of this part of IEC 60086 might also be given to measuring
and/or ensuring the safety of non-standardized primary lithium batteries. In either case, no claim or war...view more

This part of IEC 60086 specifies tests and requirements for primary lithium batteries to ensure
their safe operation under intended use and reasonably foreseeable misuse.
NOTE Primary lithium batteries that are standardized in IEC 60086-2 are expected to meet all applicable
requirements herein. It is understood that consideration of this part of IEC 60086 might also be given to measuring
and/or ensuring the safety of non-standardized primary lithium batteries. In either case, no claim or war...view more

IEC 60086-4:2019 is available as IEC 60086-4:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60086-4:2019 specifies tests and requirements for primary lithium batteries to ensure their safe operation under intended use and reasonably foreseeable misuse. NOTE Primary lithium batteries that are standardized in IEC 60086-2 are expected to meet all applicable requirements herein. It is unde...view more

This International Standard specifies test methods and requirements for primary and
secondary (rechargeable) lithium cells and batteries to ensure their safety during transport
other than for recycling or disposal. Requirements specified in this document do not apply in
those cases where special provisions given in the relevant regulations, listed in 7.3, provide
exemptions.
NOTE Different standards may apply for lithium-ion traction battery systems used for electrically propelled road
veh...view more

This International Standard specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this document do not apply in those cases where special provisions given in the relevant regulations, listed in 7.3, provide exemptions. NOTE Different standards may apply for lithium-ion traction battery systems used for electrically propelled road vehicles.

IEC 60086-4:2019 is available as IEC 60086-4:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60086-4:2019 specifies tests and requirements for primary lithium batteries to ensure their safe operation under intended use and reasonably foreseeable misuse. NOTE Primary lithium batteries that are standardized in IEC 60086-2 are expected to meet all applicable requirements herein. It is u...view more

IEC 62281:2019 is available as IEC 62281:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62281:2019 specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this document do not apply in those cases where special provisions given in t...view more

IEC 62899-501-1:2019(E) specifies failure modes and mechanical stress test methods for the determination of reliability characteristics of bendable or flexible printed primary cells and secondary cells and batteries as defined in IEC 60050-482:2004, 482-01-01, IEC 60050‑482:2004, 482-01-02, IEC 60050-482:2004, 482-01-03, IEC 60050-482:2004, 482‑01-04 and IEC 60050-482:2004, 482-01-05, respectively.
Important parameters and specifications for primary cells are mentioned in IEC 60086-1 and IEC 60...view more

This part of IEC 62952 specifies requirements and a profile for a power source containing a
generic energy harvesting adapter module (GEHAM) used as power source for wireless
communication devices (WCD).

IEC 62952-3:2017 specifies requirements and a profile for a power source containing a generic energy harvesting adapter module (GEHAM) used as power source for wireless communication devices (WCD).

This part of IEC 62952 specifies the general requirements of power modules for wireless
communication devices (WCD). This document includes additional optional specifications to
permit use in explosive atmospheres and harsh environments.
This document specifies the usability over the life-cycle of a power module including replacing
in explosive atmosphere.Unreplaceable batteries such as memory backup are out of the
scope of this standard.
Secondary batteries or power modules are covered by...view more

IEC 62952-2:2016 specifies a profile for a power module containing batteries used as power
source for wireless communication devices.

IEC 62952-3:2017 specifies requirements and a profile for a power source containing a generic energy harvesting adapter module (GEHAM) used as power source for wireless communication devices (WCD).

This International Standard specifies test methods and requirements for primary and
secondary (rechargeable) lithium cells and batteries to ensure their safety during transport
other than for recycling or disposal. Requirements specified in this standard do not apply in
those cases where special provisions given in the relevant regulations, listed in 7.3, provide
exemptions.
NOTE Different standards may apply for lithium-ion traction battery systems used for electrically propelled road
veh...view more