EN 62271-212:2017
(Main)High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
IEC 62271-212:2016 specifies the service conditions, rated characteristics, general structural requirements and test methods of the assemblies of the main electrical functional units of a high-voltage/low-voltage distribution substation, duly interconnected, for alternating current of rated operating voltages above 1 kV and up to and including 52 kV on the high-voltage side, service frequency 50 Hz or 60 Hz. This assembly is to be cable-connected to the network, and intended for installation within an indoor or outdoor closed electrical operating area. This publication is to be read in conjunction with IEC 62271-1:2007
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 212: Kompakte Gerätekombinationen für Verteilstationen (CEADS)
Appareillage à haute tension - Partie 212: Ensemble Compact d'Equipement pour Postes de Distribution (ECEPD)
L'IEC 62271-212:2016 spécifie les conditions de service, les caractéristiques assignées, les exigences structurelles générales et les méthodes d'essai des ensembles des principales unités fonctionnelles électriques d'un poste de distribution haute tension/basse tension, dûment interconnecté, pour le courant alternatif à des tensions de fonctionnement assignées supérieures à 1 kV et inférieures ou égales à 52 kV du côté haute tension, avec une fréquence de service de 50 Hz ou 60 Hz. Cet ensemble doit être raccordé par câble au réseau, et il est destiné à être installé dans un local de service électrique fermé en intérieur ou en extérieur. Cette publication doit être lue conjointement avec l'IEC 62271-1:2007.
Visokonapetostne stikalne in krmilne naprave - 212. del: Kompaktni sestavi opreme za distribucijske podpostaje (CEADS) (IEC 62271-212:2016)
Ta del standarda IEC 62271 določa pogoje delovanja, naznačene karakteristike, splošne strukturne zahteve in preskusne metode ustrezno medsebojno povezanih sestavov glavnih električnih funkcijskih enot visokonapetostne/nizkonapetostne distribucijske podpostaje za naznačene izmenične napetosti nad 1 kV do vključno 52 kV na strani z visoko napetostjo in za frekvenco delovanja 50 Hz ali 60 Hz. Ta sestav se priključi na omrežje s kablom in je namenjen za namestitev v notranjem ali zunanjem zaprtem območju električnega delovanja.
Kompakten sestav opreme za distribucijske podpostaje (CEADS), kot je opredeljeno v tem dokumentu, je zasnovan in preizkušen kot en izdelek z enotno serijsko številko in enim naborom dokumentacije.
Funkcije kompaktnih sestavov opreme za distribucijske podpostaje so:
• preklapljanje in nadzor delovanja visokonapetostnih tokokrogov;
• zaščita funkcijskih enot visokonapetostnih/nizkonapetostnih transformatorjev;
• transformacija visoke/nizke napetosti;
• preklapljanje ter nadzor delovanja in zaščite nizkonapetostnih napajalnih vodov. Vendar pa zadevne določbe tega dokumenta veljajo tudi za zasnove, kjer vse te funkcije ne obstajajo (npr. oprema, ki obsega samo transformacijo visoke/nizke napetosti ter preklapljanje in nadzor delovanja in zaščite nizkonapetostnih napajalnih vodov ali oprema brez preklapljanja in nadzora delovanja visokonapetostnih tokokrogov).
OPOMBA: Za namene tega dokumenta se samozaščiten transformator ne šteje za kompakten sestav opreme za distribucijske podsestave, ampak kot funkcijska enota, zasnovana in tipsko preskušena v skladu z lastnim standardom IEC 60076-13:2006 za izdelke.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Visokonapetostne stikalne in krmilne naprave - 212. del: Kompaktni sestavi opreme za distribucijske podpostaje (CEADS) (IEC 62271-212:2016)Appareillage à haute tension - Partie 212: Ensemble Compact d'Équipement pour Postes de Distribution (ECEPD) (IEC 62271-212:2016)High-voltage switchgear and controlgear - Part 212: Compact Equipment Assemblies for Distribution Substation (CEADS) (IEC 62271-212:2016)29.130.10Visokonapetostne stikalne in krmilne napraveHigh voltage switchgear and controlgearICS:Ta slovenski standard je istoveten z:EN 62271-212:2017SIST EN 62271-212:2017en01-april-2017SIST EN 62271-212:2017SLOVENSKI
STANDARDSIST EN 50532:20101DGRPHãþD
SIST EN 62271-212:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62271-212
January 2017 ICS 29.130.10
Supersedes
EN 50532:2010
English Version
High-voltage switchgear and controlgear -
Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) (IEC 62271-212:2016)
Appareillage à haute tension - Partie 212: Ensemble Compact d'Equipement pour Postes de Distribution (ECEPD) (IEC 62271-212:2016)
Hochspannungs-Schaltgeräte und -Schaltanlagen -
Teil 212: Kompakte Gerätekombinationen für Verteilstationen (CEADS) (IEC 62271-212:2016) This European Standard was approved by CENELEC on 2016-11-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62271-212:2017 E SIST EN 62271-212:2017
EN 62271-212:2017 2 European foreword The text of document 17C/645/FDIS, future edition 1 of IEC 62271-212, prepared by SC 17C "Assemblies" of IEC/TC 17 "High-voltage switchgear and controlgear" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62271-212:2017.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-08-30 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-11-30
This document supersedes EN 50532:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 62271-212:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60059:1999 NOTE Harmonized as EN 60059:1999 (not modified). IEC 60076-13:2006 NOTE Harmonized as EN 60076-13:2006 (not modified). IEC 61936-1:2010 NOTE Harmonized as EN 61936-1:2010 (modified). IEC 62271-4:2013 NOTE Harmonized as EN 62271-4:2013 (not modified). IEC/TR 62271-208:2009 NOTE Harmonized as IEC/TR 62271-208:2010 (not modified). SIST EN 62271-212:2017
EN 62271-212:2017 3 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the Europea
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.