EN IEC 63093-1:2020
(Main)Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
IEC 63093-1:2020 specifies the dimensions and allowable limits of surface irregularities of ferrite cores. It is intended that this document excludes ferrite cores which are specialty cores with limited use. Also, special cores which are only marginal variations upon standard cores are excluded. IEC publishes electrical standards for families of ferrite cores, as well as this series of dimensional standards for families of ferrite cores. Modifications to the ferrite cores listed in one type of standard are reflected in the other type. This document is considered as a general specification useful in the dialogue between ferrite core suppliers and users about surface irregularities. This first edition cancels and replaces the second edition of IEC 60424-1 published in 2015 and the first edition of IEC 62317-1 published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous editions of IEC 60424-1 and IEC 62317-1: a) this document integrates IEC 60424-1 and IEC 62317-1.
Ferritkerne - Richtlinien zu Maßen und Grenzen von Oberflächenbeschädigungen - Teil 1: Allgemeine Festlegungen
Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 1: Spécification générale
L'IEC 63093-1:2020 spécifie les dimensions et les limites admissibles des irrégularités de surface des noyaux ferrites. Il est prévu que le présent document exclue les noyaux ferrites qui sont des noyaux spécialisés dont l'utilisation est limitée. En outre, les noyaux spécialisés qui ne présentent que des variations marginales par rapport aux noyaux normalisés sont exclus. L’IEC publie des normes électriques pour des familles de noyaux ferrites, ainsi que cette série de normes sur les dimensions pour des familles de noyaux ferrites. Les modifications apportées aux noyaux ferrites énumérés dans un type de norme sont reproduites dans l'autre type. Le présent document est considéré comme une spécification générale utile au dialogue entre les fournisseurs de noyaux ferrites et leurs utilisateurs, portant sur les irrégularités de surface. Cette première édition annule et remplace la deuxième édition de l’IEC 60424-1 parue en 2015 et la première édition de l’IEC 62317-1 parue en 2007. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport aux éditions précédentes de l’IEC 60424-1 et l’IEC 62317-1: a) le présent document réunit l’IEC 60424-1 et l’IEC 62317-1.
Feritna jedra - Smernice o merah in mejnih vrednostih površinskih nepravilnosti - 1. del: Splošna specifikacija
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 63093-1:2020
01-oktober-2020
Nadomešča:
SIST EN 60424-1:2016
SIST EN 62317-1:2007
Feritna jedra - Smernice o merah in mejnih vrednostih površinskih nepravilnosti -
1. del: Splošna specifikacija
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1:
General specification
Ta slovenski standard je istoveten z: EN IEC 63093-1:2020
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN IEC 63093-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 63093-1:2020
---------------------- Page: 2 ----------------------
SIST EN IEC 63093-1:2020
EUROPEAN STANDARD EN IEC 63093-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 29.100.10 Supersedes EN 60424-1:2016, EN 62317-1:2007 and all
of its amendments and corrigenda (if any)
English Version
Ferrite cores - Guidelines on dimensions and the limits of
surface irregularities - Part 1: General specification
(IEC 63093-1:2020)
Noyaux ferrites - Lignes directrices relatives aux Ferritkerne - Richtlinien zu Maßen und Grenzen von
dimensions et aux limites des irrégularités de surface - Oberflächenbeschädigungen - Teil 1: Allgemeine
Partie 1: Spécification générale Festlegungen
(IEC 63093-1:2020) (IEC 63093-1:2020)
This European Standard was approved by CENELEC on 2020-05-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63093-1:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 63093-1:2020
EN IEC 63093-1:2020 (E)
European foreword
The text of document 51/1309/CDV, future edition 1 of IEC 63093-1, prepared by IEC/TC 51
"Magnetic components, ferrite and magnetic powder materials" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 63093-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-21
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-21
document have to be withdrawn
This document supersedes EN 62317-1:2007 and EN 60424-1:2016 and all of its amendments and
corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63093-1:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60401-3 NOTE Harmonized as EN 60401-3
2
---------------------- Page: 4 ----------------------
SIST EN IEC 63093-1:2020
EN IEC 63093-1:2020 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.