EN 61800-7-203:2008
(Main)Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification
Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification
It specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model as well as profile type 3 for Power Drive Systems (PDS). Profile type 3 can be mapped onto different communication network technologies.
Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 7-203: Generisches Interface und Nutzung von Profilen für Leistungsantriebssysteme (PDS) - Spezifikation von Profil-Typ 3
Entraînements électriques de puissance à vitesse variable - Partie 7-203: Interface et utilisation génériques de profils pour les entraînements électriques de puissance - Spécifications des profils de type 3
La CEI 61800-7-203:2007 spécifie les profils dédiés aux entraînements électriques de puissance (PDS) et leur mise en correspondance avec les systèmes de communication existants grâce à un modèle d'interface générique ainsi que le profil de type 3 dédié aux entraînements électriques de puissance (PDS). Le profil de type 3 peut être mis en correspondance sur différentes technologies de réseaux de communication.
Električni pogonski sistemi z nastavljivo hitrostjo - 7-203. del: Generični vmesnik in uporaba profilov za električne pogonske sisteme - Specifikacija za profil tip 3 (IEC 61800-7-203:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2008
(OHNWULþQLSRJRQVNLVLVWHPL]QDVWDYOMLYRKLWURVWMRGHO *HQHULþQLYPHVQLN
LQXSRUDEDSURILORY]DHOHNWULþQHSRJRQVNHVLVWHPH6SHFLILNDFLMD]DSURILOWLS
,(&
Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use
of profiles for power drive systems - Profile type 3 specification (IEC 61800-7-203:2007)
Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 7-203:
Generisches Interface und Nutzung von Profilen für Leistungsantriebssysteme (PDS) -
Spezifikation von Profil-Typ 3 (IEC 61800-7-203:2007)
Entraînements électriques de puissance à vitesse variable - Partie 7-203: Interface et
utilisation génériques de profils pour les entraînements électriques de puissance -
Spécifications des profils de type 3 (CEI 61800-7-203:2007)
Ta slovenski standard je istoveten z: EN 61800-7-203:2008
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61800-7-203
NORME EUROPÉENNE
April 2008
EUROPÄISCHE NORM
ICS 29.200; 35.100.05
English version
Adjustable speed electrical power drive systems -
Part 7-203: Generic interface and use of profiles for power drive systems -
Profile type 3 specification
(IEC 61800-7-203:2007)
Entraînements électriques de puissance Elektrische Leistungsantriebssysteme
à vitesse variable - mit einstellbarer Drehzahl -
Partie 7-203: Interface et utilisation Teil 7-203: Generisches Interface
génériques de profils pour les und Nutzung von Profilen
entraînements électriques de puissance - für Leistungsantriebssysteme (PDS) -
Spécifications des profils de type 3 Spezifikation von Profil-Typ 3
(CEI 61800-7-203:2007) (IEC 61800-7-203:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61800-7-203:2008 E
Foreword
The text of document 22G/184/FDIS, future edition 1 of IEC 61800-7-203, prepared by SC 22G,
Adjustable speed electric drive systems incorporating semiconductor power converters, of IEC TC 22,
Power electronic systems and equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61800-7-203 on 2008-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-11-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-02-01
with the EN have to be withdrawn
The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this document may involve the use of a patent concerning:
Derwent
Publication/Application
Holder Title accession Derwent publication
serial number
Number
EP844542 [SI] Numerical control method 1998- EP844542-A1
and control structure for 274369 27.05.1998;
controlling of movement of DE59603496-G
objects whereby speed 02.12.1999;
control is effected at a EP844542-B1
higher rate than position 27.10.1999
control
The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the holder of this patent right is registered with the IEC. Information may be
obtained from:
[SI] Siemens AG
Corporate Intellectual Property
Licensing & Transactions
Otto-Hahn-Ring 6
81730 Munich
Germany
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights other than those identified above. IEC and CENELEC shall not be held responsible for
identifying any or all such patent rights.
Annex ZA has been added by CENELEC.
__________
- 3 - EN 61800-7-203:2008
Endorsement notice
The text of the International Standard IEC 61800-7-203:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61158 NOTE Harmonized in EN 61158 series (not modified).
IEC 61499-1 NOTE Harmonized as EN 61499-1:2005 (not modified).
IEC 61784-1 NOTE Harmonized as EN 61784-1:2008 (not modified).
IEC 61784-2 NOTE Harmonized as EN 61784-2:2008 (not modified).
IEC 61800 NOTE Harmonized in EN 61800 series (not modified).
IEC 61800-7-201 NOTE Harmonized as EN 61800-7-201:2008 (not modified).
IEC 61800-7-202 NOTE Harmonized as EN 61800-7-202:2008 (not modified).
IEC 61800-7-204 NOTE Harmonized as EN 61800-7-204:2008 (not modified).
IEC 61800-7-301 NOTE Harmonized as EN 61800-7-301:2008 (not modified).
IEC 61800-7-302 NOTE Harmonized as EN 61800-7-302:2008 (not modified).
IEC 61800-7-304 NOTE Harmonized as EN 61800-7-304:2008 (not modified).
__________
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61158-5-3 - Industrial communication networks - EN 61158-5-3 2008
Fieldbus specifications -
Part 5-3: Application layer service definition -
Type 3 elements
1) 2)
IEC 61158-5-10 - Industrial communication networks - EN 61158-5-10 2008
Fieldbus specifications -
Part 5-10: Application layer service definition -
Type 10 elements
1) 2)
IEC 61158-6-3 - Industrial communication networks - EN 61158-6-3 2008
Fieldbus specifications -
Part 6-3: Application layer protocol
specification - Type 3 elements
1) 2)
IEC 61158-6-10 - Industrial communication networks - EN 61158-6-10 2008
Fieldbus specifications -
Part 6-10: Application layer protocol
specification - Type 10 elements
IEC 61800-7 Series Adjustable speed electrical power drive EN 61800-7 Series
systems - Generic interface and use of
profiles for power drive systems
1) 2)
IEC 61800-7-1 - Adjustable speed electrical power drive EN 61800-7-1 2008
systems -
Part 7-1: Generic interface and use of profiles
for power drive systems - Interface definition
1) 2)
IEC 61800-7-303 - Adjustable speed electrical power drive EN 61800-7-303 2008
systems -
Part 7-303: Generic interface and use of
profiles for power drive systems - Mapping of
profile type 3 to network technologies
1)
Undated reference.
2)
Valid edition at date of issue.
IEC 61800-7-203
Edition 1.0 2007-11
INTERNATIONAL
STANDARD
Adjustable speed electrical power drive systems –
Part 7-203: Generic interface and use of profiles for power drive systems –
Profile type 3 specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XJ
ICS 29.200; 35.100.05 ISBN 2-8318-9377-1
– 2 – 61800-7-203 © IEC:2007(E)
CONTENTS
FOREWORD.10
INTRODUCTION.12
1 Scope.15
2 Normative references .15
3 Terms, definitions and abbreviatiated terms .16
3.1 Terms and definitions .16
3.2 Abbreviated terms .20
4 General .21
4.1 Background .21
4.2 Requirements.22
4.3 Goals of the PROFIdrive Profile .22
5 Data types.22
5.1 Data types overview .22
5.2 Standard data types .23
5.3 Profile-specific data types .23
5.3.1 General .23
5.3.2 Normalised value: N2, N4 .24
5.3.3 Normalised value (variable normalisation): X2, X4.24
5.3.4 Fixed point value: E2 .25
5.3.5 Fixed point value: C4.25
5.3.6 Bit sequence: V2 .26
5.3.7 Nibble: L2.26
5.3.8 Time constant: T2, T4.26
5.3.9 Time constant: D2 .27
5.3.10 Reciprocal time constant: R2 .27
6 Specifications .27
6.1 Integration of drives in automation systems.27
6.1.1 General .27
6.1.2 Base Model .27
6.1.3 Drive Model .35
6.1.4 P-Device communication model.39
6.1.5 Application Model and Application Classes .40
6.2 Parameter model.46
6.2.1 Parameter definition .46
6.2.2 Global and Local Parameters.58
6.2.3 Base Mode Parameter Access.59
6.3 Drive control application process.78
6.3.1 General Axis type Drive Object architecture.78
6.3.2 Control and Status words .81
6.3.3 Operating modes and State Machine .87
6.3.4 DO IO Data .103
6.3.5 Dynamic Servo Control (DSC) .114
6.3.6 Position feedback interface.118
6.3.7 Periphery.140
6.3.8 Warnings, messages, faults, diagnostics . 141
61800-7-203 © IEC:2007(E) – 3 –
6.3.9 Identification.150
6.3.10 Drive reset (power-on reset) .153
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.