Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed DC power drive systems

This part of IEC 61800 applies to adjustable speed electric DC power drive systems, which include semiconductor power conversion and the means for their control, protection, monitoring, measurement and the DC motors. It applies to adjustable speed electric power drive systems intended to feed DC motors from a BDM/CDM connected to line-to-line voltages up to and including 1 kV AC 50 Hz or 60 Hz and/or voltages up to and including 1,5 kV DC input side. NOTE 1 Adjustable speed electric AC power drive systems intended to feed AC motors are covered by IEC 61800-2. NOTE 2 This document can be used as a reference for adjustable speed electric power drive systems, intended to feed DC motors from a BDM/CDM connected to line-to-line voltages up to and including 1,5 kV AC, 50 Hz or 60 Hz and/or voltages up to and including 2,25 kV DC input side. Traction applications and electric vehicles are excluded from the scope of this document. This document is intended to define the following aspects of a DC power drive system (PDS): - principal parts of the PDS; - ratings and performance; - specifications for the environment in which the PDS is intended to be installed and operated; - other specifications which might be applicable when specifying a complete PDS. This document provides minimum requirements, which may be used for the development of a specification between customer and manufacturer. Compliance with this document is possible only when each topic of this document is individually specified by the customer developing specifications or by product standard committees developing product standards. For some aspects which are covered by specific PDS product standards in the IEC 61800 series, this document provides a short introduction and reference to detailed requirements in these product standards.

Drehzahlveränderbare elektrische Antriebe - Teil 1: Allgemeine Anforderungen - Festlegungen für die Bemessung von Niederspannungs-Gleichstrom-Antriebssystemen

Entraînements électriques de puissance à vitesse variable - Partie 1: Exigences générales - Spécifications de dimensionnement pour systèmes d’entraînement de puissance à vitesse variable en courant continu et basse tension

L'IEC 61800-1:2021 s'applique aux entraînements électriques de puissance à vitesse variable en courant continu, incluant les convertisseurs à semiconducteurs et les moyens permettant de les commander, de les protéger, de les surveiller, de les mesurer, ainsi que les moteurs à courant continu. Elle s'applique aux entraînements électriques de puissance à vitesse variable destinés à alimenter les moteurs à courant continu d'un BDM/CDM connecté à des tensions entre phases jusqu'à et y compris 1 kV en courant alternatif, 50 Hz ou 60 Hz et/ou à des tensions jusqu'à et y compris 1,5 kV en courant continu côté entrée. NOTE 1 Les entraînements électriques de puissance à vitesse variable en courant alternatif destinés à alimenter les moteurs à courant alternatif sont traités par l'IEC 61800-2. NOTE 2 Le présent document peut servir de référence aux entraînements électriques de puissance à vitesse variable destinés à alimenter les moteurs à courant continu d'un BDM/CDM connecté à des tensions entre phases jusqu'à et y compris 1,5 kV en courant alternatif, 50 Hz ou 60 Hz et/ou à des tensions jusqu'à et y compris 2,25 kV en courant continu côté entrée. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) la structure des articles a été harmonisée avec celle de l’IEC 61800-2; b) l'Article 2 a été mis à jour; c) l'Article 3 a été mis à jour, y compris les définitions de base à utiliser dans l'IEC 61800 (toutes les parties); d) l'Article 4 a été mis à jour concernant: 1) la description de la topologie de base des BDM/CDM/PDS (4.2); 2) les caractéristiques assignées et caractéristiques de fonctionnement (4.3 et 4.4); 3) la référence aux normes applicables dans la série IEC 61800 relatives à la CEM (IEC 61800-3), la sécurité générale (IEC 61800-5-1), la sécurité fonctionnelle (IEC 61800-5-2), les aspects liés au régime de charge (IEC TR 61800-6), les profils de communication (série IEC 61800-7), la tension d’interface de puissance (IEC TS 61800‑8) et l’efficacité énergétique en matière d’écoconception (IEC 61800-9) afin d'éviter les exigences contradictoires (4.5, 4.6, 4.7, 4.10, 4.11, 4.12); 4) la mise à jour des exigences d'écoconception (4.8); 5) la mise à jour des exigences d'évaluation environnementale (4.9); 6) l'application des exigences relatives aux atmosphères explosives (4.13). e) l'Article 5 a été mis à jour avec les exigences d'essai afin d'associer clairement les exigences de conception et les exigences d'essai; f) l'Article 6 a été mis à jour afin d'harmoniser les exigences de marquage et de documentation dans l'IEC 61800 (toutes les parties); g) les Annexes ont été mises à jour.

Električni pogonski sistemi z nastavljivo hitrostjo - 1. del: Splošne zahteve - Ocena specifikacij za nizkonapetostne enosmerne pogonske sisteme z nastavljivo hitrostjo (IEC 61800-1:2021)

General Information

Status
Published
Publication Date
25-Feb-2021
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
26-Feb-2021
Completion Date
26-Feb-2021

Relations

Buy Standard

Standard
EN IEC 61800-1:2021 - BARVE
English language
136 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61800-1:2021
01-julij-2021
Nadomešča:
SIST EN 61800-1:2001
Električni pogonski sistemi z nastavljivo hitrostjo - 1. del: Splošne zahteve - Ocena
specifikacij za nizkonapetostne enosmerne pogonske sisteme z nastavljivo
hitrostjo (IEC 61800-1:2021)
Adjustable speed electrical power drive systems - Part 1: General requirements - Rating
specifications for low voltage adjustable speed DC power drive systems (IEC 61800-
1:2021)
Drehzahlveränderbare elektrische Antriebe - Teil 1: Allgemeine Anforderungen -
Festlegungen für die Bemessung von Niederspannungs-Gleichstrom-Antriebssystemen
(IEC 61800-1:2021)
Entraînements électriques de puissance à vitesse variable - Partie 1: Exigences
générales - Spécifications de dimensionnement pour systèmes d'entraînement de
puissance à vitesse variable en courant continu et basse tension (IEC 61800-1:2021)
Ta slovenski standard je istoveten z: EN IEC 61800-1:2021
ICS:
29.200 Usmerniki. Pretvorniki. Rectifiers. Convertors.
Stabilizirano električno Stabilized power supply
napajanje
SIST EN IEC 61800-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61800-1:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61800-1:2021


EUROPEAN STANDARD EN IEC 61800-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2021
ICS 29.200 Supersedes EN 61800-1:1998 and all of its amendments
and corrigenda (if any)
English Version
Adjustable speed electrical power drive systems - Part 1:
General requirements - Rating specifications for low voltage
adjustable speed DC power drive systems
(IEC 61800-1:2021)
Entraînements électriques de puissance à vitesse variable - Drehzahlveränderbare elektrische Antriebe - Teil 1:
Partie 1: Exigences générales - Spécifications de Allgemeine Anforderungen - Festlegungen für die
dimensionnement pour systèmes d'entraînement de Bemessung von Niederspannungs-Gleichstrom-
puissance à vitesse variable en courant continu et basse Antriebssystemen
tension (IEC 61800-1:2021)
(IEC 61800-1:2021)
This European Standard was approved by CENELEC on 2021-02-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61800-1:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61800-1:2021
EN IEC 61800-1:2021 (E)
European foreword
The text of document 22G/430(F)/FDIS, future edition 2 of IEC 61800-1, prepared by SC 22G
"Adjustable speed electric power drive systems (PDS)" of IEC/TC 22 "Power electronic systems and
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 61800-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-11-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-02-23
document have to be withdrawn

This document supersedes EN 61800-1:1998 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61800-1:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes h
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.