iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60335-2-21:1999/A11:2002

(Amendment)

Safety of household and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters

Safety of household and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters

Superseded by EN 60335-2-21:2003

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-21: Besondere Anforderungen für Wassererwärmer (Warmwasserspeicher und Warmwasserboiler)

Sécurité des appareils électrodomestiques et analogues - Partie 2-21: Règles particulières pour les chauffe-eau à accumulation

Varnost gospodinjskih in podobnih električnih aparatov - 2-21. del: Posebne zahteve za akumulacijske grelnike vode

General Information

Status
Withdrawn
Publication Date
02-May-2002
Withdrawal Date
31-May-2002
ICS
13.120 - Domestic safety
91.140.65 - Water heating equipment
Technical Committee
CLC/TC 61 - Safety of household and similar electrical appliances
Drafting Committee
IEC/TC 61 - IEC_TC_61
Parallel Committee
IEC/TC 61 - IEC_TC_61
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Mar-2006
Completion Date
01-Mar-2006
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 60335-2-21:2000/A11:2002 - Safety of household and similar electrical appliances -- Part 2-21: Particular requirements for storage water heaters

Relations

Replaced By
EN 60335-2-21:2003 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
Effective Date
28-Jan-2023
Amends
EN 60335-2-21:1999 - Safety of household and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
Effective Date
28-Jan-2023

Buy Standard

EN 60335-2-21:2000/A11:2002EN 60335-2-21:2000/A11:2002
PreviousNext
Amendment
EN 60335-2-21:2000/A11:2002
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2002
9DUQRVWJRVSRGLQMVNLKLQSRGREQLKHOHNWULþQLKDSDUDWRYGHO3RVHEQH
]DKWHYH]DDNXPXODFLMVNHJUHOQLNHYRGH
Safety of household and similar electrical appliances -- Part 2-21: Particular
requirements for storage water heaters
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2-21:
Besondere Anforderungen für Wassererwärmer (Warmwasserspeicher und
Warmwasserboiler)
Sécurité des appareils électrodomestiques et analogues -- Partie 2-21: Règles
particulières pour les chauffe-eau à accumulation
Ta slovenski standard je istoveten z: EN 60335-2-21:1999/A11:2002
ICS:
13.120 Varnost na domu Domestic safety
91.140.65 Oprema za ogrevanje vode Water heating equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60335-2-21/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2002
ICS 91.140.65; 13.120
English version
Safety of household and similar electrical appliances
Part 2-21: Particular requirements for storage water heaters

Sécurité des appareils électrodomestiques Sicherheit elektrischer Geräte für den
et analogues Hausgebrauch und ähnliche Zwecke
Partie 2-21: Règles particulières pour les Teil 2-21: Besondere Anforderungen für
chauffe-eau à accumulation Wassererwärmer (Warmwasserspeicher
und Warmwasserboiler)
This amendment A11 modifies the European Standard EN 60335-2-21:1999; it was approved by
CENELEC on 2002-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this amendment the status of a national standard without
any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Fin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 60335-2-21:2021/A1:2021(Amendment)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
SIST EN 60335-2-21:2022/A1:2022

This European Standard deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60335-2-21:2021(Main)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
SIST EN 60335-2-21:2021

IEC 60335-2-21:2012 deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard is also applicable to immersion heater units intended to be retrofitted in a heat exchange closed water heater having provision for retrofitting. Such a unit shall comply with the requirements in Annex AA. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities, or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction or children playing with the appliance. This sixth edition cancels and replaces the fifth edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). The principal changes in this edition as compared with the fifth edition of IEC 60335-2-21 are as follows: - added requirements for immersion heater units (fixed immersion heaters); - removed reference to ISO 13732-1 from Bibliography. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Storage, Immersion, Water, Heater

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
prEN IEC 60335-2-21:2024(Main)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
oSIST prEN IEC 60335-2-21:2024

IEC 60335-2-21:2022 deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances. This standard also deals with: – appliances not intended for normal household use, but which nevertheless possibly pose a source of danger to the public, such as appliances intended to be used by laymen in shops and on farms; – immersion heater units intended to be retrofitted in a heat exchange closed water heater having provision for retrofitting. Additional requirements are given in Annex AA. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account – persons (including children) whose physical, sensory or mental capabilities, or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; – children playing with the appliance. Attention is drawn to the fact that – for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary; – in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities; – in many countries regulations exist for the installation of equipment connected to the water mains. This standard does not apply to – appliances for boiling water (IEC 60335-2-15); – instantaneous water heaters (IEC 60335-2-35); – commercial dispensing appliances and vending machines (IEC 60335-2-75); – appliances intended exclusively for industrial purposes; – appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). This seventh edition cancels and replaces the sixth edition published in 2012 and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the text has been aligned with IEC 60335-1:2020; b) some notes have been converted to normative text (Clause 1, 5.2, 15.3, 19.1, 19.2, 19.3, 19.4, 22.47, 22.104, 22.110, Annex AA introduction); c) updated requirement restricting use of appliance inlets (25.1). This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
prEN IEC 60335-2-21:2024/prAA:2024(Amendment)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
oSIST prEN IEC 60335-2-21:2024/oprAA:2024
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60335-2-21:2021/A1:2021(Amendment)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
SIST EN 60335-2-21:2022/A1:2022

This European Standard deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60335-2-21:2021(Main)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
SIST EN 60335-2-21:2021

IEC 60335-2-21:2012 deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard is also applicable to immersion heater units intended to be retrofitted in a heat exchange closed water heater having provision for retrofitting. Such a unit shall comply with the requirements in Annex AA. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities, or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction or children playing with the appliance. This sixth edition cancels and replaces the fifth edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). The principal changes in this edition as compared with the fifth edition of IEC 60335-2-21 are as follows: - added requirements for immersion heater units (fixed immersion heaters); - removed reference to ISO 13732-1 from Bibliography. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Storage, Immersion, Water, Heater

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
prEN IEC 60335-2-21:2024(Main)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
oSIST prEN IEC 60335-2-21:2024

IEC 60335-2-21:2022 deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances. This standard also deals with: – appliances not intended for normal household use, but which nevertheless possibly pose a source of danger to the public, such as appliances intended to be used by laymen in shops and on farms; – immersion heater units intended to be retrofitted in a heat exchange closed water heater having provision for retrofitting. Additional requirements are given in Annex AA. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account – persons (including children) whose physical, sensory or mental capabilities, or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; – children playing with the appliance. Attention is drawn to the fact that – for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary; – in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities; – in many countries regulations exist for the installation of equipment connected to the water mains. This standard does not apply to – appliances for boiling water (IEC 60335-2-15); – instantaneous water heaters (IEC 60335-2-35); – commercial dispensing appliances and vending machines (IEC 60335-2-75); – appliances intended exclusively for industrial purposes; – appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). This seventh edition cancels and replaces the sixth edition published in 2012 and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the text has been aligned with IEC 60335-1:2020; b) some notes have been converted to normative text (Clause 1, 5.2, 15.3, 19.1, 19.2, 19.3, 19.4, 22.47, 22.104, 22.110, Annex AA introduction); c) updated requirement restricting use of appliance inlets (25.1). This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
prEN IEC 60335-2-21:2024/prAA:2024(Amendment)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
oSIST prEN IEC 60335-2-21:2024/oprAA:2024
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61535:2024(Main)
Installation couplers intended for permanent connection in fixed installations
SIST EN IEC 61535:2024

IEC 61535:2023 is available as IEC 61535:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61535:2023 applies to two-wire, up to five-wire installation couplers, with or without earthing contact, if provided, with a rated voltage up to and including 500 V AC or 500 V DC and a rated connecting capacity up to and including 10 mm2 and a rated current not exceeding 32 A for permanent connection in electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this document. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) inclusion of a definition for "live part" based on IEC 61140; b) additional optional cross medial documentation, e.g. marking with QR-Code; c) corrections on the consistent use of the expressions "earth", "earthing contact", "earthing circuit" and "protective earth(ing)" throughout the document; d) addition of missing compliance provisions to 13.3; e) update of Figure D.1 of Annex D; f) inclusion of new Annex F for cold climate requirements.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61674:2024(Main)
Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
SIST EN IEC 61674:2024

IEC 61674:2024 specifies the performance and some related constructional requirements of DIAGNOSTIC DOSIMETERS intended for the measurement of AIR KERMA, AIR KERMA LENGTH PRODUCT or AIR KERMA RATE, in photon radiation fields used in medical X-ray imaging, such as RADIOGRAPHY, RADIOSCOPY and COMPUTED TOMOGRAPHY (CT), for X-RADIATION with generating potentials in the range of 20 kV to 150 kV. This document is applicable to the performance of DOSIMETERS with VENTED IONIZATION CHAMBERS and/or SEMICONDUCTOR DETECTORS as used in X-ray diagnostic imaging. IEC 61674:2024 cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) for mammography, the manufacturer specifies the REFERENCE VALUE for the RADIATION QUALITY; b) for mammography, the manufacturer provides the MINIMUM RATED RANGE of RADIATION QUALITIES for the compliance test on energy dependence of response; c) the compliance test for analogue displays was removed; d) the compliance tests for range reset, the effect of leakage and recombination losses were removed. These tests are already covered by the test on linearity and cannot be conducted for modern devices. The estimation of COMBINED STANDARD UNCERTAINTY was changed accordingly; e) the compliance test for mains rechargeable and battery-operated dosimeters were updated for modern devices

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day