EN 61000-4-16:1998/A2:2011

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

Amandma A2:2011 je dodatek k standardu SIST EN 61000-4-16:1999.
The document contains the immunity requirements and tests for electrical and electronic equipment which are subjected to conducted disturbances in the range DC to 150 kHz. Herefore the range of test levels, the test equipment, the test set-up and the test procedure are specified.

Elektromagnetische Verträglichkeit (EMV) - Teil 4-16: Prüf- und Meßverfahren - Prüfung der Störfestigkeit gegen leitungsgeführte, asymetrische Störgrößen im Frequenzbereich von 0 Hz bis 150 kHz

Compatibilité électromagnétique (CEM) - Partie 4-16: Techniques d'essai et de mesure - Essai d'immunité aux perturbations conduites en mode commun dans la gamme de fréquences de 0 Hz à 150 kHz

Elektromagnetna združljivost (EMC) - 4-16. del: Preskusne in merilne tehnike - Preskus odpornosti proti asimetričnim motnjam po vodniku v frekvenčnem območju 0 Hz do 150 kHz - Dodatek A2 (IEC 61000-4-16:1998/A2:2009)

Amandma A2:2011 je dodatek k standardu SIST EN 61000-4-16:1999.
Dokument vsebuje zahteve za odpornost in preskuse za električno in elektronsko opremo, na kateri pride do izvedenih motenj v razponu od 0 do 150 kHz. Določeni so razpon preskusnih stopenj,
preskusna oprema, nastavitev preskusa in preskusni postopek.

General Information

• Status: Withdrawn
• Publication Date: 27-Jan-2011
• Withdrawal Date: 31-Dec-2013
• ICS: 33.100.20 - Immunity
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC 77A - IEC_SC_77A
• Parallel Committee: IEC/SC 77A - IEC_SC_77A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Jan-2019
• Completion Date: 13-Jan-2019
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61000-4-16:1999/A2:2011 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

Relations

• Replaced By: EN 61000-4-16:2016 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
• Effective Date: 07-Jun-2022
• Amends: EN 61000-4-16:1998 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61000-4-16:1999/A2:2011
01-maj-2011
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&GHO3UHVNXVQHLQPHULOQHWHKQLNH
3UHVNXVRGSRUQRVWLSURWLDVLPHWULþQLPPRWQMDPSRYRGQLNXYIUHNYHQþQHP
REPRþMX+]GRN+]'RGDWHN$,(&$
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques -
Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz
to 150 kHz
Elektromagnetische Verträglichkeit (EMV) - Teil 4-16: Prüf- und Meßverfahren - Prüfung
der Störfestigkeit gegen leitungsgeführte, asymetrische Störgrößen im Frequenzbereich
von 0 Hz bis 150 kHz
Compatibilité électromagnétique (CEM) - Partie 4-16: Techniques d'essai et de mesure -
Essai d'immunité aux perturbations conduites en mode commun dans la gamme de
fréquences de 0 Hz à 150 kHz
Ta slovenski standard je istoveten z: EN 61000-4-16:1998/A2:2011
ICS:
33.100.20 Imunost Immunity
SIST EN 61000-4-16:1999/A2:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61000-4-16:1999/A2:2011

---------------------- Page: 2 ----------------------

SIST EN 61000-4-16:1999/A2:2011

EUROPEAN STANDARD
EN 61000-4-16/A2

NORME EUROPÉENNE
January 2011
EUROPÄISCHE NORM

ICS 33.100.20


English version


Electromagnetic compatibility (EMC) -
Part 4-16: Testing and measurement techniques -
Test for immunity to conducted, common mode disturbances in the
frequency range 0 Hz to 150 kHz
(IEC 61000-4-16:1998/A2:2009)


Compatibilité électromagnétique (CEM) - Elektromagnetische Verträglichkeit (EMV)
Partie 4-16: Techniques d'essai et de -
mesure - Teil 4-16: Prüf- und Meßverfahren -
Essai d'immunité aux perturbations Prüfung der Störfestigkeit gegen
conduites en mode commun dans la leitungsgeführte, asymetrische Störgrößen
gamme de fréquences de 0 Hz à 150 kHz im Frequenzbereich von 0 Hz bis 150 kHz
(CEI 61000-4-16:1998/A2:2009) (IEC 61000-4-16:1998/A2:2009)




This amendment A2 modifies the European Standard EN 61000-4-16:1998; it was approved by CENELEC on
2011-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-16:1998/A2:2011 E

---------------------- Page: 3 ----------------------

SIST EN 61000-4-16:1999/A2:2011
EN 61000-4-16:1998/A2:2011 - 2 -
Foreword
The text of document 77A/691/FDIS, future amendment 2 to IEC 61000-4-16:1998, prepared by SC 77A,
Low frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 61000-4-16:1998
on 2011-01-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2011-10-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2014-01-01
__________
Endorsement notice
The text of amendment 2:2009 to the International Standard IEC 61000-4-16:1998 was approved by
CENELEC as an amendment to the European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
NOTE  Harmonized as EN 61000-4-6.
[4] IEC 61000-4-6
__________

----
...