EN 60684-3-211:2007

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1

Gives the requirements for semi-rigid, heat-shrinkable polyolefin sleeving with a nominal shrink ratio of 2:1 that has been found suitable for temperatures up to 135 °C. Type 1: General purpose, flame-retarded, opaque colours. Type 2: General purpose, non flame-retarded, translucent. Type 3: Fluid resistant, flame-retarded, opaque colours. Type 4: Fluid resistant, non flame-retarded, translucent. Sizes or colours other than those specifically listed in this standard may be available as custom items. The items shall be considered to comply with this standard if they comply with the property requirements listed in tables 2, 3 and also with the property requirements of table 4 for types 3 and 4, excluding dimensions. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 211: Wärmeschrumpfschläuche, halbfestes Polyolefin, Schrumpfverhältnis 2:1

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 211: Gaines thermorétractables, en polyoléfine, semi-rigides, à rapport de rétreint 2:1

Donne les exigences relatives aux gaines semi-rigides, thermorétractables, en polyoléfine, ayant un rapport de rétreint nominal de 2:1 et que l'on considère comme adaptées jusqu'à une température de 135°C. Type 1: Tous usages, retardées à la flamme, couleurs opaques. Type 2: Tous usages, non retardées à la flamme, translucides. Type 3: Résistant aux fluides, retardées à la flamme, couleurs opaques. Type 4: Résistant aux fluides, non retardées à la flamme, translucides. D'autres dimensions et d'autres couleurs que celles spécifiquement indiquées dans cette norme peuvent être disponibles comme articles spéciaux. Ces articles doivent être considérés comme satisfaisant à cette norme s'ils satisfont aux autres caractéristiques indiquées dans les tableaux 2, 3 et dans la colonne des exigences du tableau 4 pour les types 3 et 4 à l'exception des dimensions. Les matériaux conformes à cette spécification satisfont à des niveaux établis de performance. Cependant il convient que le choix d'un matériau par un utilisateur pour une application spécifique soit fondé sur les exigences réelles nécessaires pour une performance adéquate de cette application, et non fondé sur cette seule spécification.

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 211. list: Toplotno skrčljive poltoge poliolefinske cevi, razmerje krčenja 2:1 (IEC 60684-3-211:2007)

General Information

• Status: Published
• Publication Date: 08-May-2007
• Withdrawal Date: 31-Mar-2010
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 09-May-2007
• Completion Date: 09-May-2007
• Ref Project: SIST EN 60684-3-211:2007 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1

Relations

• Replaces: EN 60684-3-211:2002 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60684-3-211:2007
01-november-2007
1DGRPHãþD
SIST EN 60684-3-211:2004
*LENHL]RODFLMVNHFHYLGHO6SHFLILNDFLMH]DSRVDPH]QHWLSHFHYLOLVW
7RSORWQRVNUþOMLYHSROWRJHSROLROHILQVNHFHYLUD]PHUMHNUþHQMD,(&

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving --
Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 (IEC 60684-3-
211:2007)
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 211:
Wärmeschrumpfschläuche, halbfestes Polyolefin, Schrumpfverhältnis 2:1 (IEC 60684-3-
211:2007)
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines --
Feuille 211: Gaines thermorétractables, en polyoléfine, semi-rigides, a rapport de rétreint
2:1 (IEC 60684-3-211:2007)
Ta slovenski standard je istoveten z: EN 60684-3-211:2007
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60684-3-211:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60684-3-211

NORME EUROPÉENNE
May 2007
EUROPÄISCHE NORM

ICS 29.035.20 Supersedes EN 60684-3-211:2002


English version


Flexible insulating sleeving -
Part 3: Specifications for individual types of sleeving -
Sheet 211: Heat-shrinkable sleeving,
semi-rigid polyolefin, shrink ratio 2:1
(IEC 60684-3-211:2007)


Gaines isolantes souples -  Isolierschläuche -
Partie 3: Spécifications Teil 3: Anforderungen
pour types particuliers de gaines - für einzelne Schlauchtypen -
Feuille 211: Gaines thermorétractables, Blatt 211: Wärmeschrumpfschläuche,
en polyoléfine, semi-rigides, halbfestes Polyolefin,
à rapport de rétreint 2:1 Schrumpfverhältnis 2:1
(CEI 60684-3-211:2007) (IEC 60684-3-211:2007)




This European Standard was approved by CENELEC on 2007-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60684-3-211:2007 E

---------------------- Page: 2 ----------------------

EN 60684-3-211:2007 - 2 -
Foreword
The text of document 15/357/FDIS, future edition 3 of IEC 60684-3-211, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60684-3-211 on 2007-04-01.
This European Standard supersedes EN 60684-3-211:2002.
The major technical changes with regard to EN 60684-3-211:2002 concern a better alignment with
existing national specifications.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-01-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60684-3-211:2007 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60684-3-211:2007
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an
...