EN 60811-601:2012
(Main)Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds
Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds
IEC 60811-601:2012 specifies the test procedure for measuring the drop point of filling compounds. IEC 60811-601:2012 cancels and replaces Clause 4 of IEC 60811-5-1:1990, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 601: Physikalische Prüfungen - Messung des Tropfpunktes von Füllmassen
Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 601: Essais physiques - Mesure du point de goutte des matières de remplissage
La CEI 60811-601:2012 précise les méthodes d'essai à employer pour mesurer le point de goutte des matières de remplissage. La CEI 60811-601:2012 annule et remplace l'Article 4 de la CEI 60811-5-1:1990, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012. Cette publication doit être lue conjointement avec la CEI 60811-100:2012.
Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 601. del: Fizični preskusi - Meritev kapljišča polnilnih zmesi
601. del standarda IEC 60811 določa preskusni postopek za meritev kapljišča polnilnih zmesi.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 601: Physikalische Prüfungen - Messung des Tropfpunktes von FüllmassenCâbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 601: Essais physiques - Mesure du point de goutte des matières de remplissageElectric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop-point of filling compounds29.060.20KabliCables29.035.01Izolacijski materiali na splošnoInsulating materials in generalICS:Ta slovenski standard je istoveten z:EN 60811-601:2012SIST EN 60811-601:2012en,fr,de01-september-2012SIST EN 60811-601:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60811-601 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-601:2012 E
ICS 29.035.01; 29.060.20 Supersedes EN 60811-5-1:1999 (partially) + A1:2004 (partially)
English version
Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 601: Physical tests -
Measurement of the drop point of filling compounds (IEC 60811-601:2012)
Câbles électriques et à fibres optiques -
Méthodes d'essai pour les matériaux non-métalliques -
Partie 601: Essais physiques -
Mesure du point de goutte des matières de remplissage (CEI 60811-601:2012)
Kabel, isolierte Leitungen und Glasfaserkabel -
Prüfverfahren für nichtmetallene Werkstoffe -
Teil 601: Physikalische Prüfungen -
Messung des Tropfpunktes von Füllmassen (IEC 60811-601:2012)
This European Standard was approved by CENELEC on 2012-04-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 20/1310/FDIS, future edition 1 of IEC 60811-601, prepared by IEC/TC 20 "Electric cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60811-601:2012.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-01-17 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-04-17
This document supersedes Clause 4 of EN 60811-5-1:1999 + A1:2004 (partially). Full details of the replacements are shown in Annex A of EN 60811-100:2012. There are no technical changes with respect to EN 60811-5-1:1999 + A1:2004, but see the Foreword to EN 60811-100:2012. This standard is to be read in conjunction with EN 60811-100.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC) Endorsement notice The text of the International Standard IEC 60811-601:2012 was approved by CENELEC as a European Standard without any modification. SIST EN 60811-601:2012
- 3 - EN 60811-601:2012
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60811-100 2012 Electric and optical fibre cables - Test methods for non-metallic materials -
Part 100: General EN 60811-100 2012
IEC 60811-601 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables – Test methods for non-metallic materials –
Part 601: Physical tests – Measurement of the drop point of filling compounds
Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux non-métalliques –
Partie 601: Essais physiques – Mesure du point de goutte des matières de remplissage
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 29.035.01; 29.060.20 PRICE CODE CODE PRIX ISBN 978-2-88912-994-2
– 2 – 60811-601 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Method A (reference method) . 6 4.2.1 Apparatus . 6 4.2.2 Test procedure . 7 4.2.3 Expression of results . 7 4.3 Method B . 7 4.3.1 Apparatus . 7 4.3.2 Test procedure . 8 4.3.3 Expression of results . 8 5 Test report. 8 Bibliography . 13
Figure 1 – Cup (Method A) . 9 Figure 2 – Assembled apparatus (Method A) . 10 Figure 3 – Cup (Method B) . 11 Figure 4 – Thermometer and sleeve . 11 Figure 5 – Case . 11 Figure 6 – Assembled apparatus (Method B) . 12
60811-601 IEC:2012 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –
Part 601: Physical tests –
Measurement of the drop point of filling compounds
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60811-601 has been prepared by IEC technical committee 20: Electric cables. This Part 601 of IEC 60811 cancels and replaces Clause 4 of IEC 60811-5-1:1990, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012.
There are no specific technical changes with respect to the previous edition, but see the foreword to IEC 60811-100:2012. SIST EN 60811-601:2012
– 4 – 60811-601 IEC:2012 The text of this standard is based on the following documents: FDIS Report on voting 20/1310/FDIS 20/1359/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part of IEC 60811 shall be used in conjunction with IEC 60811-100.
A list of all the parts in the IEC 60811 series, published under the general title Electric and optical fibre cables – Test methods for non-metallic materials, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
60811-601 IEC:2012 – 5 – INTRODUCTION The IEC 60811 series specifies the test methods to be used for testing non-metallic materials of all types of cables. These test methods are intended to be referenced in standards for cable construction and for cable materials. NOTE 1 Non-metallic materials are typically used for insulating, sheathing, bedding, filling or taping within cables. NOTE 2 These test methods are accepted as basic and fundamental and have been developed and used over many years principally for the materials in all energy cables. They have also been widely accepted and used for other cables, in particular optical fibre cables, communication and control cables and cables for ships and offshore applications.
– 6 – 60811-601 IEC:2012 ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –
Part 601: Physical tests –
Measurement of the drop point of filling compound
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.