Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters

NEXT ACTION: UNDER BT CONSULTATION CLOSING ON 2019-09-03
NEXT ACTION: HAS CONSULTANT ASSESSMENT BY 2019-05-21
2019-04-16 CV:  Assessment for MD requested on 2019-04-16 (dd: 2019-05-21). If positively assessed, finalization will be brought to BT
2019-03-19 CV: Positively assessed by LVD Consultant and finalization of project brought to BT but consultation failed (Members want to have the project linked to the MD as well)
2018-09-14 CV: Revised assessment requested on 2018-09-14 (deadline E&Y: 2018-10-19)
2017-05-16 - Cannot allocate for publication due to negative assessment from Consultant.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-48: Besondere Anforderungen für elektrische Strahlungsgrillgeräte und Toaster für den gewerblichen Gebrauch

Appareils électrodomestiques et analogues - Sécurité - Partie 2-48: Règles particulières pour les grils et grille-pain électriques à usage collectif

Gospodinjski in podobni električni aparati - Varnost - 2-48. del: Posebne zahteve za komercialne električne žare in opekače - Dopolnilo A2

General Information

Status
Published
Publication Date
19-Dec-2019
Withdrawal Date
07-Oct-2022
Current Stage
6060 - Document made available - Publishing
Start Date
20-Dec-2019
Completion Date
20-Dec-2019

Relations

Buy Standard

Amendment
EN 60335-2-48:2003/A2:2020 - BARVE
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2020
Gospodinjski in podobni električni aparati - Varnost - 2-48. del: Posebne zahteve
za komercialne električne žare in opekače - Dopolnilo A2
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements
for commercial electric grillers and toasters
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-48:
Besondere Anforderungen für elektrische Strahlungsgrillgeräte und Toaster für den
gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-48: Règles particulières
pour les grils et grille-pain électriques à usage collectif
Ta slovenski standard je istoveten z: EN 60335-2-48:2003/A2:2019
ICS:
97.040.20 Štedilniki, delovni pulti, Cooking ranges, working
pečice in podobni aparati tables, ovens and similar
appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60335-2-48:2003/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2019
ICS 97.040.50
English Version
Household and similar electrical appliances - Safety - Part 2-48:
Particular requirements for commercial electric grillers and
toasters
(IEC 60335-2-48:2002/A2:2017)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-48: Règles particulières pour les grils et grille-pain ähnliche Zwecke - Teil 2-48: Besondere Anforderungen für
électriques à usage collectif elektrische Strahlungsgrillgeräte und Toaster für den
(IEC 60335-2-48:2002/A2:2017) gewerblichen Gebrauch
(IEC 60335-2-48:2002/A2:2017)
This amendment A2 modifies the European Standard EN 60335-2-48:2003; it was approved by CENELEC on 2019-10-08. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60335-2-48:2003/A2:2019 E

European foreword
The text of document 61/5322/FDIS, future IEC 60335-2-48/A2, prepared by IEC/TC 61 "Safety of
household and similar electrical appliances" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60335-2-48:2003/A2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-07-08
level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-10-08
document have to be withdrawn
This amendment supplements or modifies the corresponding clauses of the standards below:
– EN 60335-1:2012+A11:2014+ A13:2017+A1:2019+A14:2019+A2:2019 (Part 1)
– EN IEC 60335-2-48:2003+A1:2008+A2:2012(Part 2)
For the relationship with EU Directive(s) see informative Annex(es) ZZ, which is(are) an integral part(s)
of this document.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this
document.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2014/35/EU).
Endorsement notice
The text of the International Standard IEC 60335-2-48:2002/A2:2017 was approved by CENELEC as a
European Standard without any modification.

Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
The Annex ZC of Part 1 is applicable, with the following additions:
Publication Year Title EN/HD Year
IEC 60584-1 -  Thermocouples - Part 1: EMF specifications EN 60584-1 -
and tolerances
ISO 898-1 -  Mechanical properties of fasteners made of - -
carbon steel and alloy steel_- Part_1: Bolts,
screws and studs with specified property
classes_- Coarse thread and fine pitch
thread
ISO 3506-1 -  Mechanical properties of corrosion-resistant EN ISO 3506-1 -
stainless steel fasteners_- Part_1: Bolts,
screws and studs
ISO 3506-2 -  Mechanical properties of corrosion-resistant EN ISO 3506-2 -
stainless steel fasteners_- Part_2: Nuts
ISO 3506-3 -  Mechanical properties of corrosion-resistant EN ISO 3506-3 -
stainless steel fasteners_- Part_3: Set
screws and similar fasteners not under
tensile stress
ISO 3506-4 -  Mechanical properties of corrosion-resistant EN ISO 3506-4 -
stainless steel fasteners_- Part_4: Tapping
screws
Replace Annex ZZA in the part 1 by the following:
Annex ZZA
(informative)
Relationship between this European Standard and the safety objectives of
Directive 2014/35/EU [2014 OJ L96] aimed to be covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive, compliance
with the normative clauses of this standard given in Table ZZA.1 confers, within the limits of the scope
of this standard, a presumption of conformity with the corresponding safety objectives of that Directive,
and associated EFTA regulations.
Compliance with this Part 2 when used together with the Part 1 provides one means of conformity with
the safety objectives.
Table ZZA.1 – Correspondence between this European Standard
and Annex I of Directive 2014/35/EU [2014 OJ L96]
Safety objectives of Clause(s) / sub-clause(s) Remarks/
Directive 2014/35/EU of this EN Notes
1 a) Clauses 4, 7 None
1 b) Clauses 4, 7 None
1 c) Clauses 4, 7 None
Clauses 6, 7, 8, 9, 10, 11, 13, 14, 15, 16, 17, 19, 20, 21, 22,
2 a) None
23, 24, 25, 26, 27, 28, 29, 30, 31
Clauses 6, 7, 8, 9, 10, 11, 13, 14, 15, 16, 17, 19, 20, 21, 22,
2 b) None
23, 24, 25, 26, 27, 28, 29, 30, 31
2 c) Clauses 6, 7, 11, 15, 17, 18, 19, 20, 21, 22, 24, 25, 30, 32 None
Clauses 6, 7, 8, 9, 10, 11, 13, 14, 15, 16, 17, 19, 20, 21, 22,
2 d) None
23, 24, 25, 26, 27, 28, 29, 30, 31
3 a) Clauses 6, 7, 11, 17, 18, 19, 20, 21, 22 None
3 b) Clauses 7, 11, 15, 19, 22, 25, 32 None
3 c) Clauses 6, 7, 9, 10, 11, 14, 17, 18, 19, 21, 22 None
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
Annex ZZB
(informative)
The Annex ZZB is not applicable

IEC 60335-2-48 ®
Edition 4.0 2017-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 2
AM ENDEMENT 2
Household and similar electrical appliances – Safety –

Part 2-48: Particular requirements for commercial electric grillers and toasters

Appareils électrodomestiques et analogues – Sécurité –

Partie 2-48: Règles particulières pour les grils et grille-pain électriques à usage

collectif
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.040.50 ISBN 978-2-8322-4181-3

– 2 – IEC 60335-2-48:2002/AMD2:2017
© IEC 2017
FOREWORD
This amendment has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances.
The text of this amendment is based on the following documents:
FDIS Report on voting
61/5322/FDIS 61/5388/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
_____________
IEC 60335-2-48:2002/AMD2:2017 – 3 –
© IEC 2017
1 Scope
Add in the second paragraph, the words, “and similar”, after the words, “….not intended for
household”, to read:
“…not intended for household and similar use,…”.
Replace Note 101 by the following:
NOTE 101 These appliances are used for the commercial processing of food, for example in kitchens of
restaurants, canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc.
Replace the third dashed item of Note 103 by the following dashed item:
– appliances for continuous mass production of food;
2 Normative references
Replace the existing text by the following:
This clause of Part 1 is applicable except as follows.
Addition:
IEC 60584-1, Thermocouples – Part 1: EMF specifications and tolerances
ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1:
Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread
ISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1:
Bolts, screws and studs
ISO 3506-2, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 2:
Nuts
ISO 3506-3, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3:
Set screws and similar fasteners not under tensile stress
ISO 3506-4, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4:
Tapping screws
3 Definitions
Replace the title of Clause 3 but not the clause number by the following:
Terms and definitions
Add the following new definitions:
3.105
functional surface
surface that is intentionally heated by an internal heat source and has to be hot to carry out
the function for which the appliance is intended
Note 1 to entry: An example is the heated sheath of a tubular heating element.

– 4 – IEC 60335-2-48:2002/
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.