EN 61160:2005
(Main)Design review
Design review
This International Standard makes recommendations for the implementation of design review as a means of verifying that the design input requirements have been met and stimulating the improvement of the product's design. The intention is for it to be applied during the design and development phase of a product's life cycle. It provides guidelines for planning and conducting a design review and specific details concerning contributions by specialists in reliability, maintenance, maintenance support and availability.
Entwicklungsbewertung
Revue de conception
This International Standard makes recommendations for the implementation of design review as a means of verifying that the design input requirements have been met and stimulating the improvement of the product's design. The intention is for it to be applied during the design and development phase of a product's life cycle. It provides guidelines for planning and conducting a design review and specific details concerning contributions by specialists in reliability, maintenance, maintenance support and availability.
Pregled zasnove (IEC 61160:2005)
General Information
Standards Content (Sample)
6,67(16/29(16.,MDQXDU67$1'$5'LVWRYHWHQ(13UHJOHG]DVQRYH,(&'HVLJQUHYLHZ,(& !"#$%&'( )&!*- . 5HIHUHQþQDãWHYLOND6,67(1HQ,&6
EUROPEAN STANDARD
EN 61160 NORME EUROPÉENNE EUROPÄISCHE NORM
November 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61160:2005 E
ICS 03.120.01; 03.100.40
English version
Design review (IEC 61160:2005)
Revue de conception (CEI 61160:2005)
Formale Entwicklungsbewertung (IEC 61160:2005)
This European Standard was approved by CENELEC on 2005-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-08-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2008-11-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61160:2005 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60300-1 NOTE Harmonized as EN 60300-1:2003 (not modified).
IEC 60300-2 NOTE Harmonized as EN 60300-2:2004 (not modified).
IEC 60721-2 NOTE Harmonized in HD 478.2 series (not modified).
IEC 60721-3
NOTE Harmonized in EN 60721-3 series (not modified).
IEC 61078 NOTE Harmonized as EN 61078:1993 (not modified).
ISO 9000 NOTE Harmonized as EN ISO 9000:2000 (not modified).
ISO 9001 NOTE Harmonized as EN ISO 9001:2000 (not modified). __________
- 3 - EN 61160:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-191 1990 International Electrotechnical Vocabulary (IEV) Chapter 191: Dependability and quality of service
- - IEC 62198 2001 Project risk management - Application guidelines
- -
NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 61160Deuxième éditionSecond edition2005-09 Revue de conception
Design review
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2006
Droits de reproduction réservés
Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch CODE PRIX PRICE CODE V Commission Electrotechnique InternationaleInternational Electrotechnical Commission
61160 IEC:2006 – 3 –
CONTENTS FOREWORD.5 INTRODUCTION.9
1 Scope.11 1.1 General.11 1.2 Application.13 1.3 Types of application.13 2 Normative references.15 3 Terms and definitions.15 4 Management of the design review process.17 4.1 General recommendations.17 4.2 Documentation requirements.19 5 Management responsibility.19 5.1 Top management.19 5.2 Design manager.19 5.3 Management review.19 6 Design review process.19 6.1 General.19 6.2 Planning for the design review.25 6.3 Design review personnel.25 6.4 Preparation of input package.31 6.5 Meeting notification and agenda.31 6.6 Conduct of meeting.33 6.7 Design review minutes.37 6.8 Actions and recommendations.39 6.9 Follow-up and completion of action items and recommendations.39
Annex A (informative)
Example of design stages and type of design review.41 Annex B (informative)
Example of objectives for design review at different stages
of a design’s development.43 Annex C (informative)
Example of design review panel attributes.47 Annex D (informative)
Example of design review meeting topics.49 Annex E (informative)
Example of team member responsibilities.53 Annex F (informative)
Example design review checklists questions.55
Bibliography.69
Figure 1 – Design and development process.11 Figure 2 – Design review process.23
Table A.1 – Example of design stages and type of design review.41 Table E.1 – Examples of responsibilities.53
61160 IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
DESIGN REVIEW
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. This International Standard has been prepared by IEC technical committee 56: Dependability. This second edition cancels and replaces the first edition published in 1992 and its amendment 1(1994) and constitutes a technical revision. The major changes with regard to the previous edition concern the inclusion of the previous amendment
which dealt with environmental effects (10.2.7), human factors (10.2.9) and legal matters (10.2.10), as well as clarification of responsibilities for the design review process and the design review process itself. This bilingual version (2006-02) replaces the English version. The text of this standard is based on the following documents: FDIS Report on voting 56/1044/FDIS 56/1064/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table.
61160 IEC:2006 – 7 –
The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
61160 IEC:2006 – 9 –
INTRODUCTION The dependability of a product is enhanced through implementation of necessary disciplines during the design and development phases of a product’s life cycle. Like other technical and engineering disciplines, a design review needs to be properly managed in order to achieve its objectives. Properly implemented, design reviews enhance the potential for delivering a product of the required dependability, quality, performance, safety and potential for reduction in costs and delivery schedule. Both supplier and customer can utilize it. A design review is an advisory activity. It is intended primarily to provide verification of the work of the design development team, and to provide recommendations, where possible, to improve the product or process and its realization. Thus design reviews should be considered as a confirmation and refining procedure and not a creative one. Design reviews, regardless of frequency or depth cannot replace good product definitions, design specifications, and management of the design and development process. Used as a control process, design reviews can provide the necessary verification of the successful outcome of the design effort at a given time. Design reviews should not be confused
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.