Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns

Deals with safety of electroheat installations with electron guns and applies to all electroheat applications with electron guns. May also be used for non-thermal applications with electron guns and equipment employing glow discharge systems. Applies also to high-voltage sources feeding electron guns. The main changes with respect to the previous edition cover: - new editions of IEC publications taken into account; - addition of new clauses; - requirements for the earthing system updated; - arrangement of return conductor changed.

Sicherheit in Elektrowärmeanlagen - Teil 7: Besondere Anforderungen an Anlagen mit Elektronenkanonen

Sécurité dans les installations électrothermiques - Partie 7: Exigences particulières pour les installations comportant des canons à électrons

Traite de la sécurité des installations électrothermiques comportant des canons à électrons et s'applique à toutes les applications de l'électrothermie comportant des canons à électrons. Peut être utilisé pour des applications non thermiques comportant des canons à électrons et des équipements employant des systèmes à décharge luminescente. S'applique aussi aux sources à haute tension alimentant les canons à électrons. Les modifications principales par rapport à l'édition précédente comprennent: prise en compte des dernières éditions des publications CEI; addition de nouveaux articles; mise à jour des exigences du système de mise à la terre; modification de la disposition du conducteur de retour.

Varnost pri električnih grelnih inštalacijah - 7. del: Posebne zahteve za inštalacije z elektronskimi topovi (IEC 60519-7:2008)

General Information

Publication Date
Withdrawal Date
Current Stage
6060 - Document made available - Publishing
Start Date
Completion Date

Buy Standard

EN 60519-7:2009
English language
16 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

SIST EN 60519-7:2009
Safety in electroheat installations -- Part 7: Particular requirements for installations with
electron guns
Sécurité dans les installations électrothermiques - Partie 7: Exigences particulières pour
les installations comportant des canons à électrons
Ta slovenski standard je istoveten z: EN 60519-7:2008
25.180.10 (OHNWULþQHSHþL Electric furnaces
SIST EN 60519-7:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60519-7:2009

---------------------- Page: 2 ----------------------

SIST EN 60519-7:2009

EN 60519-7

December 2008

ICS 25.180.10

English version

Safety in electroheat installations -
Part 7: Particular requirements for installations with electron guns
(IEC 60519-7:2008)

Sécurité dans les installations Sicherheit in Elektrowärmeanlagen -
électrothermiques - Teil 7: Besondere Anforderungen
Partie 7: Exigences particulières an Anlagen mit Elektronenkanonen
pour les installations comportant (IEC 60519-7:2008)
des canons à électrons
(CEI 60519-7:2008)

This European Standard was approved by CENELEC on 2008-10-21. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60519-7:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60519-7:2009
EN 60519-7:2008 - 2 -
The text of document 27/578/CDV, future edition 2 of IEC 60519-7, prepared by IEC TC 27, Industrial
electroheating equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60519-7 on 2008-10-21.
This standard is to be used in conjunction with EN 60519-1:2003. It is intended to specify particular
requirements for electroheating installations with electron guns.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-11-01
Annex ZA has been added by CENELEC.
Endorsement notice
The text of the International Standard IEC 60519-7:2008 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60519-7:2009
- 3 - EN 60519-7:2008
Annex ZA

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

Publication Year Title EN/HD Year

IEC 60050-841 2004 International electrotechnical vocabulary - - -
Part 841: Industrial electroheat

IEC 60204-1 (mod) 2005 Safety of machinery - Electrical equipment of EN 60204-1 2006
machines -
Part 1: General requirements

IEC 60364-4-43 - Low voltage electrical installations - - -
Part 4-43: Protection for safety - Protection
against overcurrent

IEC 60519-1 2003 Saf

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.