iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

CLC/TS 61400-26-3:2017

(Main)

Wind energy generation systems - Part 26-3: Availability for wind power stations

Wind energy generation systems - Part 26-3: Availability for wind power stations

IEC TS 61400-26-3:2016(E) provides a framework from which time-based and production-based availability indicators of a wind power station can be derived. It unambiguously describes how data is categorised and provides examples of how the data can be used to derive availability indicators. The approach is to apply the terms and definitions for the applied information models introduced in IEC TS 61400-26-1 and IEC TS 61400-26-2 to a wind power station.

Windenergieanlagen - Teil 26-3: Verfügbarkeit von Windenergieanlagen

Systèmes de production d'énergie éolienne - Partie 26-3: Disponibilité pour les centrales éoliennes

Sistemi za proizvodnjo energije na veter - 26-3. del: Razpoložljivost vetrnih elektrarn (IEC/TS 61400-26-3:2016)

ICS:   27.180
Ta del standarda IEC 61400, ki je tehnična specifikacija, zagotavlja okvir, iz katerega je mogoče izpeljati indikatorje razpoložljivosti vetrne elektrarne, ki temeljijo na času in proizvodnji. Nedvoumno opisuje, kako so podatki kategorizirani in ponuja primere, kako se lahko podatki uporabijo za pridobivanje kazalnikov razpoložljivosti.
Pristop je uporaba izrazov in definicij za uporabljene informacijske modele, uvedene v standardih IEC TS 61400-26-1 in IEC TS 61400-26-2, pri vetrni elektrarni.
Osnovni pristop temelji na predpostavki, da se lahko vetrna elektrarna oblikuje kot en »sistem za proizvodnjo vetrne turbine«, ki predstavlja popolno vetrno elektrarno. Vetrna elektrarna je sestavljena iz vseh sistemov za proizvodnjo vetrne turbine, funkcionalnih storitev in ravnovesja rastlinskih elementov, kot je razvidno iz skupne priključne točke.
Namen te specifikacije ni opredeliti, kako je treba izračunati razpoložljivost na podlagi časa in proizvodnje. Prav tako ni njen namen, da bi bila podlaga za meritve delovanja krivulje električne energije — kar je cilj standarda IEC 61400-12. Vendar naj bi dodatke obravnavali kot primere in smernice za razvoj metod za izračun indikatorjev razpoložljivosti.
Ta dokument vsebuje tudi informativne dodatke s:
• primeri, kako razširiti model na več storitev,
• primeri, kako določiti kategorijo informacij za vetrno elektrarno,
• primeri, kako razširiti model na ravnovesje rastlinskih elementov,
• primeri ugotavljanja izgubljene proizvodnje,
• primeri algoritmov razpoložljivosti za indikatorje, ki temeljijo na proizvodnji,
• primeri drugih indikatorjev razpoložljivosti,
• primeri scenarijev uporabe.

General Information

Status
Withdrawn
Publication Date
31-Aug-2017
ICS
27.180 - Wind turbine energy systems
Technical Committee
CLC/TC 88 - Wind turbines
Drafting Committee
CLC/TC 88 - Wind turbines
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
03-Jul-2022
Completion Date
03-Jul-2022
Ref Project
SIST-TS CLC/TS 61400-26-3:2017 - Wind energy generation systems - Part 26-3: Availability for wind power stations (IEC/TS 61400-26-3:2016)

Relations

Replaced By
EN IEC 61400-26-1:2019 - Wind energy generation systems - Part 26-1: Availability for wind energy generation systems
Effective Date
03-Apr-2018

Buy Standard

TS CLC/TS 61400-26-3:2017 - BARVETS CLC/TS 61400-26-3:2017 - BARVE
PreviousNext
Technical specification
TS CLC/TS 61400-26-3:2017 - BARVE
English language
121 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CLC/TS 61400-26-3:2017
01-oktober-2017
Sistemi za proizvodnjo energije na veter - 26-3. del: Razpoložljivost vetrnih
elektrarn (IEC/TS 61400-26-3:2016)
Wind energy generation systems - Part 26-3: Availability for wind power stations (IEC/TS
61400-26-3:2016)
Windenergieanlagen - Teil 26-3: Verfügbarkeit von Windenergieanlagen (IEC/TS 61400-
26-3:2016)
Systèmes de production d'énergie éolienne - Partie 26-3: Disponibilité pour les centrales
éoliennes (IEC/TS 61400-26-3:2016)
Ta slovenski standard je istoveten z: CLC/TS 61400-26-3:2017
ICS:
27.180 Vetrne elektrarne Wind turbine energy systems
SIST-TS CLC/TS 61400-26-3:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CLC/TS 61400-26-3:2017

---------------------- Page: 2 ----------------------

SIST-TS CLC/TS 61400-26-3:2017


TECHNICAL SPECIFICATION CLC/TS 61400-26-3

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
September 2017
ICS 27.180

English Version
Wind energy generation systems -
Part 26-3: Availability for wind power stations
(IEC/TS 61400-26-3:2016)
Systèmes de production d'énergie éolienne -  Windenergieanlagen -
Partie 26-3: Disponibilité pour les centrales éoliennes Teil 26-3: Verfügbarkeit von Windenergieanlagen
(IEC/TS 61400-26-3:2016) (IEC/TS 61400-26-3:2016)
This Technical Specification was approved by CENELEC on 2017-07-17.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. CLC/TS 61400-26-3:2017 E

---------------------- Page: 3 ----------------------

SIST-TS CLC/TS 61400-26-3:2017
CLC/TS 61400-26-3:2017
European foreword
This document (CLC/TS 61400-26-3:2017) consists of the text of IEC/TS 61400-26-3:2016 prepared
by IEC/TC 88 "Wind energy generation systems".
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC/TS 61400-26-3:2016 was approved by CENELEC as a
Technical Specification without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61400-1 NOTE Harmonized as EN 61400-1.
IEC 61400-12-1:2005 NOTE Harmonized as EN 61400-12-1:2006 (not modified).
IEC 61400-12-2:2013 NOTE Harmonized as EN 61400-12-2:2013 (not modified).
IEC 61400-25-1:2006 NOTE Harmonized as EN 61400-25-1:2007 (not modified).
IEC 61400-25-2:2015 NOTE Harmonized as EN 61400-25-2:2015 (not modified).
IEC 61400-25-3:2015 NOTE Harmonized as EN 61400-25-3:2015 (not modified).
IEC 61400-25-4:2008 NOTE Harmonized as EN 61400-25-4:2008 (not modified).
IEC 61400-25-5:2006 NOTE Harmonized as EN 61400-25-5:2007 (not modified).
IEC 61400-25-6:2010 NOTE Harmonized as EN 61400-25-6:2011 (not modified).
2

---------------------- Page: 4 ----------------------

SIST-TS CLC/TS 61400-26-3:2017
CLC/TS 61400-26-3:2017
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60050 series International Electrotechnical - -
Vocabulary
IEC 60050-415 -  International Electrotechnical - -
Vocabulary - Part 415: Wind turbine
genera
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61400-50-3:2022/AC:2023-11(Corrigendum)
Wind energy generation systems - Part 50-3: Use of nacelle-mounted lidars for wind measurements
SIST EN IEC 61400-50-3:2022/AC:2024
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61400-21-2:2023(Main)
Wind energy generation systems - Part 21-2: Measurement and assessment of electrical characteristics - Wind power plants
SIST EN IEC 61400-21-2:2023

IEC 61400-21-2 - Wind energy generation systems - Measurement and assessment of electrical characteristics - Wind power plants - has the following scope: IEC 61400-21-2 defines and specifies the quantities that shall be determined to characterize the electrical characteristics of grid-connected power plants (PP). IEC 61400-21-2 defines the measurement and test procedures for quantifying the electrical characteristics as basis for the verification of compliance of PP, including: - Power quality aspects - Steady state operation - Dynamic response (undervoltage and overvoltage fault ride-through) - Disconnection from grid (Grid protection) - Control performance IEC 61400-21-2 defines a uniform functionality test and measurement procedure for the power plant controller (PPC), as a basis for the unit test of the power plant controller. IEC 61400-21-2 defines the procedures for assessing compliance with electrical connection requirements, including the aggregation methods for power quality aspects such as voltage variations, flicker, harmonics and interharmonics. IEC 61400-21-2 defines the procedures for measurement and fault recording for the verification of power plant electrical simulation models in relation to undervoltage and overvoltage ride through events. These measurement procedures are valid for power plants, including the power plant controller and other connected equipment, necessary for the operation of the Power Plant. The measurement procedures are valid for any size of power plant connected to the point of connection (POC) at one connection point. The procedures for assessing and verifying the compliance with grid connection requirements are valid for power plants in power systems with fixed frequency and a sufficient short-circuit power. Out of the scope of this standard are: - Multi park control, i.e. cluster management of several power plants (PP) or several connection points - Compliance test and performance requirements, including pass or fail criteria - Specific component test and validation of the PP equipment (switchgear, cables, transformers, etc.), which are covered by other IEC standards - Wind power plant model validation, as defined in the IEC 61400-27-2 - Load flow calculation methods and load flow study guidelines - Test and measurement of the communication interface and system of the PP as defined in the IEC 61400-25 series NOTE For the purposes of this document, the following terms for system voltage apply, based on IEC 60038 Low voltage (LV) refers to 100 V  230 kV

  • Standard
    151 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61400-50-1:2022(Main)
Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments
SIST EN IEC 61400-50-1:2023

IEC 61400-50-1:2022 specifies methods and requirements for the application of instruments to measure wind speed (and related parameters, e.g. wind direction, turbulence intensity). Such measurements are required as an input to some of the evaluation and testing procedures for wind energy and wind turbine technology (e.g. resource evaluation and turbine performance testing) described by other standards in the IEC 61400 series. This document is applicable specifically to the use of wind measurement instruments mounted on meteorological masts, turbine nacelles or turbine spinners which measure the wind at the location at which the instruments are mounted. This document excludes remote sensing devices which measure the wind at some location distant from the location at which the instrument is mounted (e.g. vertical profile or forward facing lidars).

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61400-12-1:2022(Main)
Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines
SIST EN IEC 61400-12-1:2022

IEC 61400-12-1:2022 specifies a procedure for measuring the power performance characteristics of a single wind turbine and applies to the testing of wind turbines of all types and sizes connected to the electrical power network. In addition, this document defines a procedure to be used to determine the power performance characteristics of small wind turbines (as defined in IEC 61400-2) when connected to either the electric power network or a battery bank. This document defines a measurement methodology that requires the measured power curve and derived energy production figures to be supplemented by an assessment of uncertainty sources and their combined effects. This third edition of IEC 61400-12-1 is part of a structural revision that cancels and replaces the performance standards IEC 61400-12-1:2017 and IEC 61400-12-2:2013. The structural revision contains no technical changes with respect to IEC 61400-12-1:2017 and IEC 61400‑12‑2:2013, but the parts that relate to wind measurements, measurement of site calibration and assessment of obstacle and terrain have been extracted into separate standards.

  • Standard
    157 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61400-12-2:2022(Main)
Wind energy generation systems - Part 12-2: Power performance of electricity producing wind turbines based on nacelle anemometry
SIST EN IEC 61400-12-2:2023

IEC 61400-12-2:2022 specifies a procedure for verifying the power performance characteristics of a single electricity-producing, horizontal axis wind turbine that is not considered to be a small wind turbine per IEC 61400-2. It is expected that this document be used when the specific operational or contractual specifications do not comply with the requirements set out in IEC 61400-12-1. The purpose of this document is to provide a uniform methodology of measurement, analysis, and reporting of power performance characteristics for individual electricity producing wind turbines utilising nacelle-anemometry methods. This document is intended to be applied only to horizontal axis wind turbines of sufficient size that the nacelle-mounted anemometer does not significantly affect the flow through the turbine’s rotor and around the nacelle and hence does not affect the wind turbine’s performance. This second edition of IEC 61400-12-2 is part of a structural revision that cancels and replaces the performance standards IEC 61400-12-1:2017 and IEC 61400-12-2:2013. The structural revision contains no technical changes with respect to IEC 61400-12-1:2017 and IEC 61400‑12‑2:2013, but the parts that relate to wind measurements, measurement of site calibration and assessment of obstacle and terrain have been extracted into separate standards.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61400-12:2022(Main)
Wind energy generation systems - Part 12: Power performance measurements of electricity producing wind turbines - Overview
SIST EN IEC 61400-12:2022

The IEC 61400 series of standards addresses wind energy generation technical requirements up to the point of interconnection with the utility grid system. Part 12 of the IEC 61400 series of standards comprises a sub-set of standards which are to be used in the evaluation and measurement of the power performance characteristics of wind turbines. The power performance characterisation of wind turbines of all types and sizes is covered. Wind turbine power performance characteristics are determined from a measured power curve and an associated estimated annual energy production (AEP) and its uncertainty. The measured power curve, defined as the relationship between the wind speed and the wind turbine power output, is determined by collecting simultaneous measurements of meteorological variables (including wind speed), as well as wind turbine signals (including power output) at the test site for a period that is long enough to establish a statistically significant database over a range of wind speeds and under varying wind and atmospheric conditions. The AEP is calculated by applying the measured power curve to reference wind speed frequency distributions, assuming 100 % availability. Part 12-0 provides a general introduction to the available options for power performance measurement and the contributing evaluations which are further detailed in the other parts of the IEC 61400-12 series. Although the -12 series also defines the specifications of the meteorological variables (and in particular wind speed) required for the power performance evaluation, the methods and procedures for measuring or otherwise acquiring the wind speed data are defined in the IEC 61400-50 wind measurement series of standards. The evaluation of the wind turbine power performance characteristic according to this series of standards requires the measured power curve and derived energy production figures to be supplemented by an assessment of uncertainty sources and their combined effects. The basis of the uncertainty assessment is ISO/IEC Guide 98-3. The wind measurement uncertainty sources shall be identified and quantified from procedures described in the relevant wind measurement standards contained in the IEC 61400-50 series. The wind measurement uncertainties shall be propagated through to and combined with the other sources of uncertainty in the power curve and annual energy production using methods and assumptions described in the IEC 61400-12 series of standards.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61400-12-6:2022(Main)
Wind energy generation systems - Part 12-6: Measurement based nacelle transfer function of electricity producing wind turbines
SIST EN IEC 61400-12-6:2022

IEC 61400-12-6:2022 specifies a procedure for measuring the nacelle transfer function of a single electricity-producing, horizontal axis wind turbine, which is not considered to be a small wind turbine in accordance with IEC 61400-2. It is expected that this document be used when a valid nacelle transfer function is needed to execute a power performance measurement according to IEC 61400-12-2. This document specifies how to characterise a wind turbine's nacelle transfer function. The nacelle transfer function is determined by collecting simultaneous measurements of nacelle‑measured wind speed and free stream wind speed (as measured on a meteorological mast) for a period that is long enough to establish a statistically significant database over a range of wind speeds and under varying wind and atmospheric conditions. The procedure also provides guidance on determination of measurement uncertainty including assessment of uncertainty sources and recommendations for combining them. This first edition of IEC 61400-12-6 is part of a structural revision that cancels and replaces the performance standards IEC 61400-12-1:2017 and IEC 61400-12-2:2013. The structural revision contains no technical changes with respect to IEC 61400-12-1:2017 and IEC 61400‑12‑2:2013, but the parts that relate to wind measurements, measurement of site calibration and assessment of obstacle and terrain have been extracted into separate standards.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61400-12-3:2022(Main)
Wind energy generation systems - Part 12-3: Power performance - Measurement based site calibration
SIST EN IEC 61400-12-3:2022

IEC 61400-12-3:2022 specifies a measurement and analysis procedure for deriving the wind speed correction due to terrain effects and applies to the performance testing of wind turbines of all types and sizes connected to the electrical power network as described in IEC 61400‑12‑1. The procedure applies to the performance evaluation of specific wind turbines at specific locations. The purpose of this part of IEC 61400 is to provide a uniform methodology that will ensure consistency, accuracy and reproducibility in the measurement and analysis of a site calibration for use in the determination of the power performance of wind turbines. This document provides guidance in the measurement, analysis, and reporting of the site calibration for subsequent use in power performance testing for wind turbines. This first edition of IEC 61400-12-3 is part of a structural revision that cancels and replaces the performance standards IEC 61400-12-1:2017 and IEC 61400-12-2:2013. The structural revision contains no technical changes with respect to IEC 61400-12-1:2017 and IEC 61400‑12‑2:2013, but the parts that relate to wind measurements, measurement of site calibration and assessment of obstacle and terrain have been extracted into separate standards.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61400-50-2:2022(Main)
Wind energy generation systems - Part 50-2: Wind measurement - Application of ground-mounted remote sensing technology
SIST EN IEC 61400-50-2:2022

Part 50 of IEC 61400 specifies methods and requirements for the application of instruments to measure wind speed (and related parameters, e.g. wind direction and turbulence intensity). Such measurements are required as an input to some of the evaluation and testing procedures for wind energy and wind turbine technology (e.g. resource evaluation and turbine testing) described by other standards in the IEC 61400 series. Part 50-2 is applicable specifically to the use of ground mounted remote sensing wind measurement instruments, i.e devices which measure the wind at some location generally above and distant from the location at which the instrument is mounted (e.g. sodars, vertical profiling lidars). This document specifically excludes other types of RSD such as forward facing or scanning lidars.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61400-50:2022(Main)
Wind energy generation systems - Part 50: Wind measurement - Overview
SIST EN IEC 61400-50:2022

IEC 61400-50:2022 provides a general introduction to the options that are available for wind measurement, which are further detailed in the other parts of the IEC 61400-50 series. Tandis que ces autres normes définissent les cas d’utilisation relatifs aux mesurages du vent, la série IEC 61400-50 établit des exigences de mesure du vent qui sont indépendantes des cas d’utilisation. Son objectif est d’assurer que les mesurages du vent et l’évaluation des incertitudes (relative à ces mesurages) sont effectués de manière cohérente dans tout le secteur éolien; et d’assurer que ces mesurages du vent sont effectués de telle sorte que les incertitudes pouvant être quantifiées soient dans une plage acceptable. This first edition of IEC 61400-50 is part of a structural revision that cancels and replaces the performance standards IEC 61400-12-1:2017 and IEC 61400-12-2:2013. The structural revision contains no technical changes with respect to IEC 61400-12-1:2017 and IEC 61400-12-2:2013, but the parts that relate to wind measurements, measurement of site calibration and assessment of obstacle and terrain have been extracted into separate standards.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day