EN 60745-2-19:2009
(Main)Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers
Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers
Applies to jointers for cutting into wood or similar material.
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-19: Besondere Anforderungen für Flachdübelfräsen
Outils électroportatifs à moteur - Sécurité - Partie 2-19: Règles particulières pour les mortaiseuses
S'applique aux mortaiseuses destinées à couper du bois ou tout matériau similaire.
Električna ročna orodja - Varnost - 2-19. del: Posebne zahteve za rezalnike z rezalno ploščo za rezanje rež in utorov (IEC 60745-2-19:2005, spremenjen)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60745-2-19:2009
01-december-2009
1DGRPHãþD
SIST EN 60745-2-19:2005
(OHNWULþQDURþQDRURGMD9DUQRVW GHO 3RVHEQH]DKWHYH]DUH]DOQLNH]
UH]DOQRSORãþR]DUH]DQMHUHåLQXWRURY ,(& VSUHPHQMHQ
Hand-held motor-operated electric tools - Safety -- Part 2-19: Particular requirements for
jointers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-19: Besondere
Anforderungen für Flachdübelfräsen
Outils électroportatifs à moteur - Sécurité -- Partie 2-19: Règles particulières pour les
mortaiseuses
Ta slovenski standard je istoveten z: EN 60745-2-19:2009
ICS:
25.100.01 Rezalna orodja na splošno Cutting tools in general
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-19:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60745-2-19:2009
---------------------- Page: 2 ----------------------
SIST EN 60745-2-19:2009
EUROPEAN STANDARD
EN 60745-2-19
NORME EUROPÉENNE
July 2009
EUROPÄISCHE NORM
ICS 25.140.20 Supersedes EN 60745-2-19:2005 + A11:2007
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-19: Particular requirements for jointers
(IEC 60745-2-19:2005, modified)
Outils électroportatifs à moteur - Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-19: Règles particulières Sicherheit -
pour les mortaiseuses Teil 2-19: Besondere Anforderungen
(CEI 60745-2-19:2005, modifiée) für Flachdübelfräsen
(IEC 60745-2-19:2005, modifiziert)
This European Standard was approved by CENELEC on 2009-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-19:2009 E
---------------------- Page: 3 ----------------------
SIST EN 60745-2-19:2009
EN 60745-2-19:2009 - 2 -
Foreword
The text of the International Standard IEC 60745-2-19:2005, prepared by IEC SC 61F, (transformed
into IEC TC 116, Safety of hand-held motor-operated electric tools), together with common
modifications prepared by the Technical Committee CENELEC TC 61F (transformed into TC 116),
Safety of hand-held motor-operated electric tools, was submitted to the formal vote and was
approved by CENELEC as EN 60745-2-19 on 2005-06-01.
A draft amendment (prAA) was prepared to align Subclause 6.2 with the new Subclause 6.2 in
EN 60745-1. Moreover, vibration values determined with the new 6.2 are complying with the
requirements of the Physical Agents Directive Vibration 2002/44/EC. The text of the draft was
submitted to the Unique Acceptance Procedure and was approved by CENELEC as amendment A11
to EN 60745-2-19:2005 on 2007-07-01.
A further draft amendment (prAB), extending Annex ZZ to include the new MD 2006/42/EC, was
submitted to the formal vote.
The combined texts were approved by CENELEC as a new edition of EN 60745-2-19 on 2009-06-01.
This European Standard supersedes EN 60745-2-19:2005 + A11:2007.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-12-29
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-12-29
This standard is divided into two parts:
Part 1: General requirements which are common to most hand-held electric motor operated tools (for
the purpose of this standard referred to simply as tools) which could come within the scope of
this standard;
Part 2: Requirements for particular types of tools
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.