EN 60317-0-2:2014
(Main)Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
IEC 60317-0-2:2013 specifies the general requirements of enamelled rectangular copper winding wires. The range of nominal conductor dimensions is given in the relevant specification sheet. This third edition cancels and replaces the second edition published in 1997, Amendment 1:1999 and Amendment 2:2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of 3.2.2, transferring general winding wire requirements from the scope; - correction to Table 7 units; - change to Clause 15 requirements with a simple reference to IEC 60172; - deletion of Annex E. Key words: requirements of enamelled rectangular copper winding wires
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-2: Allgemeine Anforderungen - Lackisolierte Flachdrähte aus Kupfer
Spécifications pour types particuliers de fils de bobinage - Partie 0-2: Exigences générales - Fil de section rectangulaire en cuivre émaillé
La CEI 60317-0-2:2013 spécifie les exigences générales pour les fils de bobinage de section rectangulaire en cuivre émaillé. La gamme des dimensions nominales des conducteurs est donnée dans la feuille de spécification appropriée. Cette troisième édition de la CEI 60317-0-2 annule et remplace la deuxième édition parue en 1997, l'Amendement 1:1999 et l'Amendement 2:2005. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - ajout du Paragraphe 3.2.2 transférant des exigences générales sur le fil de bobinage, présentes dans le domaine d'application; - correction des unités du Tableau 7; - modification des exigences de l'Article 15 avec une simple référence à la CEI 60172; - suppression de l'Annexe E. Mots clés: exigences pour les fils de bobinage de section rectangulaire en cuivre émaillé
Specifikacije za posebne vrste navijalnih žic - 0-2. del: Splošne zahteve - Emajliran bakren vodnik s pravokotnim prerezom (IEC 60317-0-2:2013)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2014
1DGRPHãþD
SIST EN 60317-0-2:2001
SIST EN 60317-0-2:2001/A1:2001
SIST EN 60317-0-2:2001/A2:2005
Specifikacije za posebne vrste navijalnih žic - 0-2. del: Splošne zahteve - Emajliran
bakren vodnik s pravokotnim prerezom (IEC 60317-0-2:2013)
Specifications for particular types of winding wires - Part 0-2: General requirements -
Enamelled rectangular copper wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-2:
Allgemeine Anforderungen - Flachdrähte aus Kupfer, lackisoliert
Spécifications pour types particuliers de fils de bobinage - Partie 0-2: Prescriptions
générales - Fil de section rectangulaire en cuivre émaillé
Ta slovenski standard je istoveten z: EN 60317-0-2:2014
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60317-0-2
NORME EUROPÉENNE
January 2014
EUROPÄISCHE NORM
ICS 29.060.10 Supersedes EN 60317-0-2:1998 + A1:2000 + A2:2005
English version
Specifications for particular types of winding wires -
Part 0-2: General requirements -
Enamelled rectangular copper wire
(IEC 60317-0-2:2013)
Spécifications pour types particuliers de Technische Lieferbedingungen für
fils de bobinage - bestimmte Typen von Wickeldrähten -
Partie 0-2: Exigences générales - Teil 0-2: Allgemeine Anforderungen -
Fil de section rectangulaire en cuivre Lackisolierte Flachdrähte aus Kupfer
émaillé (IEC 60317-0-2:2013)
(CEI 60317-0-2:2013)
This European Standard was approved by CENELEC on 2013-11-11. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-0-2:2014 E
Foreword
The text of document 55/1410/FDIS, future edition 3 of IEC 60317-0-2, prepared by IEC/TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2014-08-11
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-11-11
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60317-0-2:1998.
EN 60317-0-2:1998:
– addition of 3.2.2, transferring general winding wire requirements from the scope;
– correction to Table 7 units;
– change to Clause 15 requirements with a simple reference to EN 60172;
– deletion of Annex E.
This standard is to be read in conjunction with the EN 60851 series. The clause numbers used in this
part of EN 60317 are identical with the respective test numbers of EN 60851 series.
In case of inconsistencies between EN 60851 and this part of EN 60317, the latter prevails.
The numbering of clauses in this standard is not continuous from Clauses 21 and 30 in order to
reserve space for possible future wire requirements prior to those for wire packaging.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60317-0-2:2013 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60264 Series NOTE Harmonized as EN 60264 Series (not modified).
IEC 60317 Series NOTE Harmonized as EN 60317 Series (not modified).
- 3 - EN 60317-0-2:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60172 - Test procedure for the determination of the EN 60172 -
temperature index of enamelled winding
wires
IEC 60851 Series Winding wires - Test methods EN 60851 Series
ISO 3 - Preferred numbers - Series of preferred - -
numbers
IEC 60317-0-2 ®
Edition 3.0 2013-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Specifications for particular types of winding wires –
Part 0-2: General requirements – Enamelled rectangular copper wire
Spécifications pour types particuliers de fils de bobinage –
Partie 0-2: Exigences générales – Fil de section rectangulaire en cuivre émaillé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 29.060.10 ISBN 978-2-8322-1149-6
– 2 – 60317-0-2 © IEC:2013
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, general notes and appearance . 7
3.1 Terms and definitions . 7
3.2 General notes . 8
3.2.1 Methods of test . 8
3.2.2 Winding wire . 9
3.3 Appearance . 9
4 Dimensions . 9
4.1 Conductor dimensions . 9
4.2 Tolerance on conductor dimensions . 9
4.3 Rounding of corners . 10
4.4 Increase in dimensions due to the insulation . 12
4.5 Overall dimensions . 12
4.5.1 Nominal overall dimensions. 12
4.5.2 Minimum overall dimensions . 12
4.5.3 Maximum overall dimensions . 12
5 Electrical resistance . 13
6 Elongation . 13
7 Springiness . 13
8 Flexibility and adherence . 13
8.1 Mandrel winding test . 13
8.2 Adherence test . 13
9 Heat shock . 14
10 Cut-through . 14
11 Resistance to abrasion . 14
12 Resistance to solvents . 14
13 Breakdown voltage . 14
14 Continuity of insulation . 14
15 Temperature index . 14
16 Resistance to refrigerants . 15
17 Solderability . 15
18 Heat or solvent bonding . 15
19 Dielectric dissipation factor . 15
20 Resistance to transformer oil . 15
21 Loss of mass . 15
23 Pin hole test . 15
30 Packaging. 15
Annex A (informative) Nominal cross-sectional areas for preferred and intermediate
sizes . 17
Bibliography . 25
60317-0-2 © IEC:2013 – 3 –
Table 1 – Conductor tolerances . 10
Table 2 – Nominal cross-sectional areas of preferred sizes. 11
Table 3 – Corner radii . 12
Table 4 – Increases in dimensions. 12
Table 5 – Elongation . 13
Table 6 – Mandrel winding . 13
Table 7 – Breakdown voltage . 14
Table A.1 – Nominal cross-sectional areas (1 of 7) . 17
Table B.1 – Tolerances for calculating special maximum and minimum dimensions of
grade 2 rectangular wire . 24
– 4 – 60317-0-2 © IEC:2013
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPECIFICATIONS FOR PARTICULAR
TYPES OF WINDING WIRES –
Part 0-2: General requirements –
Enamelled rectangular copper wire
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical c
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.